Supply and exhaust system vts. Ventilation units VTS Clima. Ventilation units VTS: features of work

Using the latest technology and innovative engineering solutions, our company has developed unique VTS Clima units. Many years of experience help us to produce plants that fully meet the requirements of the modern market. Supply and exhaust and air supply systems VTS are reliable energy-saving equipment, the main functions of which are:

• movement and filtration of supply and exhaust air;
• thermodynamic air treatment:
  • moisturizing,
  • drainage,
  • the heating,
  • cooling;
• energy recovery.

Ventilation units VTS: features of work

The units are designed to work with external air in the temperature range from -40 to +60 °C. Air-handling and air handling units VTS are produced without heat recovery and with heat exchangers of rotary and cross-flow types. Systems with a mixing chamber and/or a glycol circuit operate with outdoor air not lower than -50 °C, provided that the temperature in the room where they are located is not less than the same mark. For the VTS ventilation unit with a rotary heat exchanger, the air temperature must not fall below -30 °C.

It is important to note that military-technical cooperation installations are not just machines. They include a set of carefully selected and programmed automation applications for control and monitoring, which allow you to regulate the operation of ventilation and air conditioning systems. The algorithms used to control the VTS Clima air handling units were developed to minimize operating costs while maintaining required parameters incoming air, as well as to reduce the likelihood of accidents.

Application range of VTS air handling units

• Buildings of any type, regardless of the area: both small restaurants and large shopping malls.
• Objects for various purposes: commercial, residential, industrial.

A feature of the military-technical cooperation equipment is the possibility of its universal use due to a wide range of functional elements. For example, it is successfully used in both subtropical and arctic climates. Whether it's an office in Dubai, a factory in Siberia or a shopping center in Budapest - vent Ventus units work flawlessly, providing comfort in all climatic zones.

Advantages of VTS Klima units

• Compact dimensions:
  • have an optimal height (suspended options - from 36 cm, on the foundation - from 53 cm);
  • adapt to the technical and operational features of the premises and ventilation ducts.
• Universal application:
  • VTS Klima air inlets are able to function in any climatic conditions (from -50 to +70 ° C);
  • designed for a long service life;
  • parameters are confirmed by the EUROVENT certificate and research in laboratories;
  • can be supplied in sections.
• Energy saving. Any VTS Clima air handling unit has:
  • PLUG fan with backward curved blades;
  • direct drive;
  • frequency converter that regulates the operation parameters;
  • optimal set of functional elements;
  • simple control algorithms.
• Automation applications:
  • the VTS exhaust unit can be controlled remotely;
  • automation is open to central control systems (BMS).
• Frameless design:
  • the Ventus unit has a robust casing made of sandwich panels with polyurethane foam insulation;
  • has the highest class of tightness;
  • prevents the formation of "warm bridges".
• A large selection of standard sizes in accordance with the characteristics of any object: customers are provided with 16 standard sizes, as well as the VTS Clima catalog of 2015 with a description, technical specifications and price.

It should be noted that the capabilities of the VTS VS supply unit were significantly expanded due to the presence of an adiabatic air humidification section. You can get more detailed information about VTS Clima units on our official website. Here is a catalog with a complete range of VTS units, the price of which depends on individual technical features.

Air handling units and central air conditioners VENTUS are designed to supply premises with up to 100,000 m3/h of heated air or up to 70,000 m3/h of cooled air. In both cases, heat recovery units can be installed in the air handling unit: recuperative with a cross heat exchanger or a rotating heat exchanger, allowing up to 85% of energy to be recovered.

A size range of 16 sizes allows you to choose an air handling unit that best suits the needs of a particular facility in terms of investment and operating costs. The new VENTUS line has been optimized in terms of the overall dimensions of the units and made more convenient for placement in a variety of rooms.

The first two sizes out of 16 VENTUS (VS10 and VS15) belong to the group of small-sized, "suspended" air handling units. Through the use of VTS modern materials and components, VENTUS air handling units are so compact and light that they allow mounting in a suspended position even more powerful machines up to size VS150, which have a capacity of up to 18,000 m3/h.

Suspended air handling units of the first size operating in the range of 1000 - 1500 m3/h have a height of only 36 cm. VENTUS air handling units with a capacity of up to 15,000 m3/h can be installed in standard rooms up to 2.6 m high Similar, but more powerful machines with air supply up to 25,000 m3/h, it can be placed in rooms with a height of 3.2 m (EU standard).

The new VENTUS air handling units from VTS for ventilation and air conditioning systems include units for outdoor installation on outdoors, as before, but the reduction in the height of the new equipment made the unit more “flat”, lowered the center of gravity and reduced the “windage” of the hull.

The body panels of the VENTUS air handling unit are made of two galvanized steel sheets, the outer sheet is covered with an additional anti-corrosion layer. The internal filling of the panel is a layer of polyurethane foam. This housing design allows the use of air handling units in various climatic zones (from -40 C to +70 C). The special design of locks - labyrinths connecting individual blocks of the body, increases the strength and tightness of the system.

The VENTUS air handling units are designed to save energy consumption of the ventilation and air conditioning system, which allows to reduce operating costs, in some cases, by 35%. The use of a new fan group with a frequency converter and a frameless fan of a new improved design in the VENTUS air handling units also led to a decrease in power consumption. The increased efficiency of these fans, the reduction of acoustic noise - all this characterizes the new VENTUS air handling units.

The automatic control, regulation and control system developed by VTS for the supply air units VENTUS has a freely programmable controller of the SIEMENS concern, specially designed for ventilation and air conditioning systems.
The automation kit has a connector for connecting an external small-sized control panel. External remote control remote control the automation system allows you to easily and quickly read and set the required operating parameters of the VENTUS unit.

In addition, the operating parameters of the unit can be set and controlled using a personal computer with a standard RS-232 port. It is possible to integrate the automation kit with a building management system (BMS) based on the most common LON standard. Air handling units VTS has a certificate of conformity from Rostest, Hygienic Conclusion, Eurovent, ISO 9001-14001, CE, TUV. VTS provides a 3-year warranty for VENTUS air handling units.

Attention! To receive a quotation, you must specify in the order:

1. Name / purpose of the object.

2. Address of the object.

3. The name of the company indicated in the project documentation (who made the project).

If there is no information about the object, indicate:

• Performance
• Full pressure
• Presence of a cooler/heater
• Type of cooler/heater (freon/water, electricity)
• Inlet and outlet temperatures
• With or without heat recovery? Recuperator type?
• Filter type

Or fill out the questionnaire:

We invite you to familiarize yourself with the range of VTS Clima ventilation units. This section of the catalog presents supply duct, suspended supply and exhaust and floor supply and exhaust units. Each type has its own characteristics and advantages, so you will have plenty to choose from.

• The ventilation duct units of the Ventus N-Type series can only be installed in rectangular ventilation ducts. The catalog presents these units in four sizes - according to the existing type series. Each standard size has fan sections, filters, water or electric heating air, air cooling, noise absorbing elements, valves and flexible connectors. The advantage of this series is the manufacturing technology of the case - Monocoque;
• Suspended air handling units Ventus VS 10-15 are available in two standard sizes with air capacity from 400 to 3600 m3/h. Can be operated at air temperatures from -40 to +50 degrees Celsius. Designed for indoor use, have a low weight and low height, can be mounted under suspended ceilings. Are completed with various functional blocks, depending on requirements of the client;
• Floor air handling units Ventus VS 21-650 are available in 14 standard sizes and are capable of handling air in the range from 1200 to 100,000 m3/h. These are overall structures designed for installation in industrial premises, shopping centers and other large facilities. They can operate in the temperature range of -40 to +60 degrees Celsius, they are equipped with all the necessary blocks to effectively perform the functions of removing air from the room and supplying clean air required temperature and humidity.

VTS Clima ventilation units - advantages

Ventilation units from this brand have a whole range of significant advantages, which include a lightweight but durable design (frameless case), good noise absorption, a high degree of energy recovery (up to 85%), and the presence of highly efficient PLUG-fans.

A range of sizes ranging from suspended compact installations and ending with overall, designed for high air flow, and a wide selection of sections that perform all the functions of air treatment - all this allows you to choose the right unit that is suitable for a given room with the required microclimate parameters.

The Smart Trading company represents all models of ventilation units manufactured by VTS Clima. Our qualified specialists will provide advice on the selection of the installation and help you make the right choice.