Water heaters Electric flow (VEP). Electric water heaters for water heating and for heating. storage water heaters. instantaneous water heaters

There are two types of water heaters: instantaneous water heaters and storage water heaters. Instantaneous water heaters allow you to get hot water almost instantly, however, they are characterized by a large current (power) consumption, which is not always possible for existing electrical wiring. Storage water heaters consume much less power, while it takes some time to heat the water in the tank. According to a set of characteristics and operating experience, it has been established that storage water heaters that heat water with the help are in the greatest demand.

Cumulative electric water heaters consist of a sealed (most often steel) container, and a heating element of the heating element, which is located inside the water heater tank. Water in storage water heaters is heated to the required temperature using a heating element, while using a relatively small power. Inside the storage water heater, the water coming from the water supply is constantly heated to the required temperature and maintained during its operation. The advantage of storage water heaters is due to the fact that hot water, if necessary, can be distributed to several water points at the same time. For example: using an electric storage water heater in the bathroom and kitchen.

ELECTRIC STORAGE WATER HEATERS "TERMEX"

There is no doubt that electric storage water heaters are complex household appliances. The load to which a water heater is subjected during its life is not experienced by any household appliance. Therefore, the manufacturer should be looked at especially carefully.
There are many pitfalls in the production of electric water heaters. Electrochemical corrosion, stray currents, thermal and hydraulic shocks, wear of electrical safety components - all this is faced by the water heater during operation. Only a professional who has been purposefully engaged in this technique for a long time can solve these problems.
There are only a few real world-class professionals. In Europe, THERMEX is the leading specialized manufacturer of water heaters. Since its foundation in 1949, it has concentrated all its efforts in a single direction - the production of electric water heaters. By investing all its scientific and technical potential in the improvement of water heaters, TERMEX today is one of the three world leaders.

Some types of storage water heaters "Termex"

Boilers electric storage water heaters series "CHAMPION" and "CHAMPION Slim" are designed to heat water for sanitary needs. A feature of these heaters is the innovative coating of the inner tank - bioglass porcelain, applied using BIO-Glasslined technology. The shape of the heaters is round, the execution is vertical. Safety valve and power cord included. Diameter of water heaters: CHAMPION - 45cm; CHAMPION Slim - 38cm.

WATER HEATER THERMEX ER 50 V

Model: ER 50V
Serie: CHAMPION
Heating time: 1 hour 45 minutes
Dimensions height (mm): 530
Dimensions width (mm): 450
Dimensions Depth (mm): 470
Type: Accumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel

Version: Vertical
Volume hot water: 50 litre.


Power: 1.5 kW

WATER HEATER THERMEX ER 150 V

Model: ER 150V
Serie: CHAMPION
Heating time: 5 hours 20 minutes
Dimensions height (mm): 1400
Dimensions width (mm): 450
Dimensions Depth (mm): 470
Type: Accumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Coating of the inner tank: Bioglass porcelain
Version: Vertical
Hot water volume: 150 liters.
Inner Tank Warranty: 3 YEARS
Warranty for electrical components: 1 YEAR
Power: 1.5 kW

STORAGE WATER HEATER THERMEX ES 30 V

Model: ES 30V
Serie: CHAMPION
Heating time: 1 hour 05 minutes
Dimensions height (mm): 460
Dimensions width (mm): 380
Dimensions Depth (mm): 400
Type: Accumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Coating of the inner tank: Bioglass porcelain
Version: Vertical
Hot water volume: 30 liters.
Inner Tank Warranty: 3 YEARS
Warranty for electrical components: 1 YEAR
Power: 1.5 kW

STORAGE WATER HEATER THERMEX ES 70 V

Model: ES 70V
Serie: CHAMPION
Heating time: 2 hours 30 minutes
Dimensions height (mm): 940
Dimensions width (mm): 380
Dimensions Depth (mm): 400
Type: Accumulative
Shape: Round
Production: Russia
Anode: Magnesium
Inner tank: Steel
Coating of the inner tank: Bioglass porcelain
Version: Vertical
Hot water volume: 70 liters.
Inner Tank Warranty: 3 YEARS
Warranty for electrical components: 1 YEAR
Power: 1.5 kW

FLOWING WATER HEATER VEP type

Electric flow water heaters are designed for rapid heating of water in the presence of cold water supply.
Instantaneous water heaters work automatically: they turn on at the moment of supply cold water(opening the valve of the input line) and turn off at the moment the valve is closed.

Electric flow water heaters of the VEP type are stationary electric heaters designed to heat running water for technological and sanitary needs at industrial enterprises, Agriculture, at home, etc.

Marking of instantaneous water heaters VEP
VEP-X UHL4:
VEP - flowing electric water heater;
X - water heater power, kW;
UHL4 - Climatic performance and placement category according to GOST 15150-69. No. According to the method of protecting a person from defeat electric shock the water heater belongs to class I according to GOST 27570.0-87, has a splash-proof design.
Water heaters comply with TU 34 4245-400 NPO "S" -959/95-5-92.

A flowing water heater is a structure consisting of a steel tank enclosed in a casing. A temperature sensor is installed at the top of the tank. A heating block is fixed at the bottom of the instantaneous water heater tank. A safety valve is installed on the cold water inlet. It combines three valves: the safety valve opens the water outlet to the outside when the pressure in the tank rises to (0.67 + 0.03) MPa; check valve through which water enters the tank, but cannot flow back from it if pressure has disappeared in the supply water supply; the overflow valve opens the outlet of water from the tank to the supply water line in the event that the pressure in the tank exceeds the pressure of the water supply by 0.07 MPa. The valve allows you to lower the pressure in the tank while heating the water. The arrow on the safety valve body indicates the direction of water supply to the heater.

In the control cabinet of an electric instantaneous water heater there are: a magnetic starter that switches electric heaters, which allow you to change the power consumption in steps 1/3, 2/2, 1 from the nominal one; fuse that protects control circuits from short circuit; automatic switches that protect the device from electromagnetic and thermal overloads.

As a water temperature sensor, a TAD101-1 temperature sensor-relay is used, set to a temperature of (75 + 5) degrees. C, it automatically turns off heating elements from the mains and turns them on again when the water cools down. If desired, the water temperature can be set from 30 to 90 degrees. FROM.

The set of delivery of an instantaneous electric water heater includes: instantaneous water heater; control cabinet; set of spare parts and accessories (seal - 6 pieces, fuse VP1-1-0.5 A, operation manual).

Some types of instantaneous water heaters of the VEP type

VEP-6M: Instantaneous electric water heater

Brand VEP-6M
Voltage, V 220
Power, kW 6
Overall dimensions, mm 220x240x475

VEP-15: Instantaneous electric water heater

Brand VEP-15
Voltage, V 380
Power, kW 15
Overall dimensions, mm 260x290x540

WATER HEATERS (ELECTRIC BOILERS)
HEATING TYPE VEO

Flow-through electric boilers for heating VEO are stationary electric heaters designed for heating industrial and residential premises in open heating systems with an expansion tank.

Electric boilers VEO are designed for heating residential buildings, recreation centers, public, industrial and agricultural premises, as well as other premises equipped with a water heating system. Distinctive features: in heating mode, the boilers automatically follow the set air temperature in the heated room.

Electric boilers VEO operate offline, protected from overheating, increased water pressure, consumes a minimum of electricity.

Electric boilers may not be the most popular means of space heating and most likely will not be able to compete with gas boiler, but they may well compete with liquid fuel boilers. Electric boilers are easy to install, operate, compact, and do not require additional equipment, are safe and are an environmentally friendly source of heat, as they do not emit emissions into the atmosphere.

Specifications VEO heating water heaters can be found in our Price list for water heaters.

Our Company offers storage water heaters produced by "Termex", instantaneous water heaters of the VEP type, as well as water heaters (boilers) for heating of the VEO type.
The heating element is being manufactured.
Large range of room heaters.
You can find the assortment and technical characteristics on the website page:

General information

Water heaters are stationary electric heaters designed for heating running water at industrial enterprises, agriculture, at home, etc. VEP-X UHL4:
VEP - flowing electric water heater;
X - water heater power, kW;
UHL4 - climatic version and placement category according to GOST
15150-69. No. According to the method of protecting a person from electric shock, the water heater belongs to class I according to GOST 27570.0-87, has a splash-proof design.
Water heaters comply with TU 34 4245-400 NPO "S" -959/95-5-92.

Normative and technical document

TU 34 4245-400 NPO "S" -959 / 95-5-92

Specifications

Technical data of water heaters are given in the table.

Water heater type VEP (figure) consists of a water heater and a control cabinet.

The water heater is a structure consisting of a steel tank enclosed in a casing. A temperature sensor is installed at the top of the tank. A heating block is fixed at the bottom of the tank. A safety valve is installed on the cold water inlet. It combines three valves: the safety valve opens the water outlet to the outside when the pressure in the tank rises to (0.67 + 0.03) MPa; a non-return valve through which water enters the tank, but cannot flow back from it if pressure has disappeared in the supply water supply; the overflow valve opens the outlet of water from the tank to the supply water line in the event that the pressure in the tank exceeds the pressure of the water supply by 0.07 MPa. The valve allows you to lower the pressure in the tank while heating the water. The arrow on the safety valve body indicates the direction of water supply to the heater.
The control cabinet contains: a magnetic starter that switches electric heaters, which allow you to change the power consumption in steps 1/3, 2/2, 1 from the nominal one;
fuse that protects control circuits from short circuit; automatic switches that protect the device from electromagnetic and thermal overloads.
As a temperature sensor for water, a temperature sensor TAD101-1 is used, set to a temperature of (75 + 5) ° C, it automatically turns off the heating elements from the mains and turns them on again when the water cools down. If desired, the water temperature can be set from 30 to 90°C.

The package includes: water heater; control cabinet;
set of spare parts and accessories (seal - 6 pieces, fuse VP1-1-0.5 A, operation manual).

Hot water today is a matter of course. In its absence, immediately there is a huge inconvenience and a feeling of detachment from civilization. In a country house or in a private house, it is not always possible to bring in central hot water supply, moreover, in apartments with amenities, it sometimes fails. But progress, fortunately, inevitably affects not only large-scale industrial production, but also the everyday life of people - now you can buy a water heater in a plumbing store and take care of comfortable conditions for yourself and your family on your own.

Types and characteristics of water heaters

According to the principle of action, they distinguish:

• Electric storage water heaters (another name is "boiler") - are a container with a heat source, the so-called heating element, placed inside or outside.
• Flowing. They have much smaller tank sizes - water flows through a fairly narrow pipe, heats up and immediately goes to the supply. A flowing electric water heater can be equipped with one of the types of heating elements - a heating element, or an uninsulated spiral.
• On sale there is also a combined option - flow-accumulative boilers.

Advantages and disadvantages of a storage water heater

They are convenient because:

• have low power consumption,
• Easy to install and connect
• it is possible to service several water points at the same time.

The disadvantages include:

• relatively large dimensions, which is associated with an increased volume of storage capacity.

Features of flow type water heater models

• Water is heated immediately
• unlike the first, you do not need to wait until a new portion of the liquid is heated,
• there is no constant consumption of electricity to heat the contents of the tank.

The main disadvantage is that:

• when water is heated, a large amount of electricity is taken from the network.
• with a low power of the device, the temperature or pressure may not be sufficient for a comfortable shower

Water heaters electric flow type VEP are stationary electric heaters designed for heating running water at industrial enterprises, agriculture, at home, etc.

Electric water heater type VEP consists of a water heater, a control cabinet and a safety valve.
The water heater is a structure consisting of a steel tank enclosed in a casing. In the upper part of the tank there is a (sensor) temperature limiter 75 ± 5ºС, it automatically turns off the heating elements from the mains and turns them on again when the water cools down. As an emergency thermal switch, a sensor without self-return is used, set to a temperature of 93 ± 5ºС. A heating block is fixed at the bottom of the tank. A safety valve is installed on the cold water inlet. It combines a safety valve that opens the water outlet to the outside when the pressure in the tank rises to 0.6 MPa and a check valve through which water enters the tank, but cannot flow back from it if pressure has disappeared in the supply water supply. The arrow on the safety valve body indicates the direction of water supply to the heater.
The control cabinet contains:
- magnetic starter, switching electric heaters;
- a fuse that protects the control circuits from short circuit;
- automatic switches, allow you to change the power consumption in steps in relation to the nominal one.

Main characteristics

• Type - flow
• Power - 6000 W
• Productivity 30°С — 165 l/h
• Productivity 60°С — 85 l/h
• Maximum heating temperature - 75 ° C
• Voltage - 220 V
• Dimensions - 22x24x47.5 cm
• Weight - 12 kg

Water heater VEP-6M

Industrial instantaneous water heater VEP-6M is required for heating running water used for sanitary and technological needs. This stationary electric heater can be used in public catering establishments (for example, for washing dishes), in kindergartens, schools, clinics - in any institution that needs constant hot water.

Advantages

• flowing. It is this design feature of the VEM-6M that is its main advantage. The water is heated during the time it is in the small tank of the equipment. Although the installation of such a device is more complicated than the accumulative model, but unlike them, it has an important advantage - it is able to heat an unlimited amount of water;
• High performance. This indicator depends on the degree of heating. At a temperature of 30 ° C, it will heat up to 165 l / h, at 60 ° C - 85 l / h. This feature will allow you to regulate not only the degree of water heating, but also the performance of the device;
• Dimensions. With a sufficiently high performance, the water heater is very compact: its dimensions are only 220x240x475 mm.

Technical features

• Power industrial instantaneous water heater is 6 kW. The uniqueness of this model is that at such a high power, a standard 220 V network is required for connection (and not a three-phase 380 V, which is required by other devices with such power);
• Maximum water temperature- 75°С. You can adjust the degree of heating yourself;
• Durability provides a special splash-proof design of the housing and metal parts with anti-corrosion coating.

Industrial instantaneous water heater in the online store

You can buy VEP-6M models directly on our website. To place an order, click on the "Buy" button below the product image, then indicate your preferred form of payment (