Where can I get a 12 gauge pipe. How to make a gun from a water pipe

Today we will look at a unique design gas gun that runs on alcohol. This miracle of technology is assembled from PVC pipes and various components for them. The device runs on liquid fuel, the author uses isopropyl alcohol. However, you can use almost any combustible substance, ranging from alcohol, ending with cologne, sprays or even gasoline.

A feature of the gun is that it does not need regular refueling after each shot. The power system is designed so that 40-50 shots can be fired at one gas station. Inside the gun, special sponges are installed, thanks to which alcohol evaporates, these vapors subsequently ignite.

The system is equipped forced submission air, this makes the gun more powerful, as more air means higher compression. Air is pumped by a special pump, it is enough to make 6-10 clicks for a shot.

List of materials and tools used by the author for homemade:

List of materials:
- 30cm 3/4" PVC;
- 30 cm 1 1/4 "" PVC;
- 1 1/4"" x 3/4"" Sleeve x 3;
- 1 1/4"" Tee X 3;
- 1 1/4"" threaded adapter;
- 1 1/4"" Elbow;
- 1 1/4" x 1" threaded bushing;
- 1 1/4 "" threaded plug;
- 1 "" threaded plug;
- 1"" x 3/4"" Sleeve x 2;
- lighter (piezoelectric element);
- paint of your choice;
- kitchen sponge;
- thin steel rod;
- cheap ball pump (or similar)
- optical sight (optional).

List of tools:
- glue gun;
- drill;
- electrical tape;
- hacksaw for metal;
- pliers;
- wires.

Cannon manufacturing process:

Step one. Making an adapter
First of all, you will need to make an adapter, thanks to which the muzzle can be connected to the hand. This adapter is made from a piece of PVC pipe. The problem is that this adapter must not let air and expanding gases into the handle, so it must be sealed. To solve the problem, the author seals one side of the tube with electrical tape, and then pours hot glue inside to a level of about ¾. When the glue has cooled, you will have a great cork.

Step two. We prepare blanks and glue the base
Pick up all the necessary blanks, like the author in the photo. Then they just need to be glued good glue. As a result, you will get an almost finished rifle, it remains only to install all the necessary “organs”.

Step three. Preparing a place for the "trigger"
The trigger for this gun uses a piezo element from a lighter, which, when pressed, clicks and emits a spark. Under it tediously drill a hole in the handle. The author, apparently, did not have a drill at hand, and he decided to melt the plastic by heating the nail with a burner.

Step four. We get a piezoelectric element
The piezoelectric element can be found in many lighters, very often it is found in pocket lighters, as it is small in size. You will need to solder two long wires to it, if they are not there. We solder one wire to the existing one, and the second to the lower metal part. The wires must be very well insulated, as a spark can break through before reaching its destination.

Step five. We fix the piezoelectric element
Install the piezoelectric element in the place prepared for it and glue it well with hot glue. Since it is pressed quite tightly, it is highly desirable that the piezoelectric element rests on something.

As for the wires, they need to be brought into the combustion chamber. Spread the ends a couple of millimeters so that when you press the piezo, a spark occurs between the electrodes. Secure the wires with hot glue on the outside for a tight seal.

Step six. Making a "heat sink"
I could not understand the purpose of this part. It is possible that this is just a decorative element. To make this part, you will need a piece of PVC pipe larger in diameter than the muzzle. Print out the template provided by the author and glue it to the pipe. Then just drill holes. To take away jagged edges, use a sharp knife and sandpaper.

Step seven. We fix the "heat sink" on the muzzle
There are plugs on this part, drill holes in them according to the diameter of the muzzle. Then put the "heat sink" on the muzzle.

Step eight. Arrangement of the air supply system
To supply air, you will need a small pump for balls and other things made of plastic. Attach it to the body of the rifle the way the author did. You can fix it with hot glue, carefully insulate the pump entry point with a tube into the gun with glue. The pump must be equipped check valve so that the pump does not release air.

Step nine. silencer for rifle
Of course, a professional sniper rifle must have a silencer. The author makes it from two PVC pipes of different diameters. First, we take a pipe of small diameter and drill in it a large number of holes. The sound of the gun when fired will depend on the diameter, location and number of holes. This tube is installed inside the pipe larger diameter which has plugs on both sides.
Clean the holes from bumps using sandpaper.

Step ten. Making an emphasis
When fired from a rifle, there is a recoil in the shoulder, so there should be good support here. We take two PVC tubes, heat them with a burner and make them flat. Well, then we bend them to the desired angle and attach them to the gun.

Step 11 Tactical Rails
Attach tactical rails to your rifle to mount a scope and other accessories. The author used hot glue for these purposes.

Question: What is it?
It turns out that this is a homemade weapon controlled by Sony Playstation, created by the Syrian Liberation Army.
I am not an expert in military equipment, but even to me, a lamer, it becomes clear in this that the rebels were able to do something that the bright heads of the military who invent combat terminators cannot think of.
And all you need is a Playstation - either a Chinese calculator, a car battery, a bunch of wires and two strange pipes, apparently which shoot at enemies, will do.
That’s all I need, although here on this site we try not to touch politics, well, it’s not ours, but when the media bred people, they say, look like they are fighting against the hated government, for some reason I want to smile.

And the most interesting thing is that the scenario is repeated, nothing new. In Libya, everything also went according to the same pattern.

If we recall the news of the military operations in Libya, then the most popular weapon they had was not the Kalashnik, but the old Japanese pickup trucks, in the back of which a machine gun was installed. And all this was done in small workshops that, before the war, were engaged in the repair of tractors and cars.

In order not to be unfounded, I would like to link to the source, but there is none. This is all an analysis of the situation and quite possibly erroneous assumptions, but we continue further.
Somehow in one interview they showed how some master makes his cars. Before creating another masterpiece, he watches Hollywood action films and, based on them, creates his own miracle weapon. The main thing is that it looks scarier and more convincing.

Creating another armored car, the mechanic complained that Chinese pickups are very unreliable and when hanging armor plates, they sometimes happen that they can’t even move from their place, and to drive them is only in front of journalists.

Yes, and all these homemade products are not designed for fighting. Well, think for yourself how you can make a rifle out of a water pipe, and even so that it shoots.
Although, in such a high-tech weapon from a pipe, the system itself can recognize the enemy, aim and shoot in the head. 21st century however!
The main thing is that the pipe for such weapons should be from under hot water.

The weapon shown in the photographs is not an ultra-long-range sniper rifle at all. On the contrary, it is a gun that can be made from a piece of ordinary water pipe, and sometimes even a small boat was required to use it. But with the help of such a device, you can break all hunting records, without exaggeration, knocking down dozens of ducks.

Handguns in Europe have been known since the Middle Ages, and all this time they were used not only in war, but also for hunting. It was in the pursuit of game that hunters used the largest hand-held "guns" of all that have ever existed in the world.

A century ago, hunting for wild birds, mainly ducks and geese, provided food not only for the tables of aristocrats, but was also an important help for ordinary people. It was the waterfowl hunters who figured out how to kill them in dozens at once. The secret of success lies in the long barrel (up to 3 meters) of large caliber (up to 5 cm). Such a smooth-bore shotgun that fires shots was formerly called a “refiner” or “goose” (English duck gun or punt gun).

Hunters often made unique guns with their own hands. A street lamp post, and even a fairly thick water pipe, could serve as a trunk. A handle-butt was attached to the barrel. True, few dared to shoot from the shoulder with such a weapon - a dislocation is guaranteed. Basic effective way hunting is to firmly attach the "weft" to the boat and already on it to track down a flock of birds.

A successful hunt with the world's largest handgun looked like this. The hunter, sitting in a boat with a "refinery" installed, slowly and quietly made his way among the thickets of reeds, listening to the sounds. He needed to "calculate" the location of a flock of ducks. Approaching close enough, he directed the bow of the boat in the direction of the flock and frightened away the birds. The birds that rose into the air were stunned by the sound of a shot, and then hundreds of lead pellets, weighing a total of half a kilo, killed them on the spot. After a successful shot, the hunter could well take up to fifty ducks with him. True, not all birds were suitable for food, because. fractions in the meat could be too much.

Too successful hunting for birds, of course, could not but affect their numbers. The mass genocide of ducks was stopped only by banning the "refinery" at the legislative level. So, in the United States, the giant shotgun was "banned" in the 1860s, but for a long time it was widely used by poachers. And in the UK, "specifiers" are still used, however, a caliber of no more than 44 mm is allowed.

Huge shotguns - "refiners" were also produced in Russian Empire at arms factories in Tula, Klimovsk and Izhevsk. And in the next review you can find out about