We make a powerful blower with our own hands. We make a garden vacuum cleaner and blower with our own hands: detailed instructions and useful recommendations How to make a strainer

A very powerful blower that blows a good airflow that can easily blow any dust out of a computer system block. Such high power is achieved by the optimal design of the installation, the use of a powerful and high-speed engine, and an energy-intensive battery from a screwdriver.
blower can find the most different applications at home and in your workshop. I already showed you one.

A big plus is its mobility, since everything works without a network and anywhere.
The principle of operation of the turbine is centrifugal.

Required for crafting

• Plexiglass.
• PVC pipes: one large diameter, which is used for sewerage. And one of a small diameter, like for a water pipe.
• , which can be bought at .
• Screwdriver battery.
• Switch.
• Second glue.

Making a powerful blower

Cut off the ring from the big pipe.

We put it on a sheet of plexiglass and circle it.

With a Ballerina type drill, cut out two circles from plexiglass. Only not the same diameter, 2 cm more.

As a result, we got such a kit for assembling the case.

We mark both rounds and drill holes at a distance of about 0.5 cm from the edge.

In one of the rounds, we drill a hole for the engine.

Cut off a small piece of pipe. This will be the air intake.

We drill a hole under it in the second round.

Let's try for now.

Next, we take a piece of PVC pipe 15-20 cm long and cut it with a round nozzle on one side to make a snug fit to the body ring.

Attach to the ring and circle.

In the ring we make a hole for the pipe. First, drill with a round nozzle. And then with a file we give the shape of an oval, under the adjacent pipe.

Glue with superglue. This will be the air outlet.

We paint all parts.

The body is ready. We proceed to the manufacture of the impeller.
To do this, cut rounds of smaller diameters from the canister.

We saw off the tube from the body of the ballpoint pen and glue it into the center of one circle with second glue.

In the second circle we make a hole for air intake.

The blades are made from PVC pipe. We cut rings of the same thickness.

Cut into semicircles.

The impeller assembly kit is ready.

But before proceeding with the assembly, we will make a semicircular cut in each blade.

Glue the blades.

Glue the second circle on top.

Now we collect the entire turbine together. Remove the protective layer from the plexiglass. We glue the air intake tube into one round.

On the other side we fasten the engine.

Eventually:

To put the impeller on the motor shaft, I used a cable braid of a suitable size.

Cut off the desired length and put on the impeller.

Next, we collect the entire body together.

We fix with long bolts and nuts.

Many things that seem unnecessary to us can actually be applied in the household. One has only to set a goal to realize incredible idea, and the solution may come by itself. And the resulting creation will forever be remembered for exciting moments of creativity in the home workshop.
And how can you not remember about cleaning, because this event sometimes crosses out all creative impulses. Putting things in order, cleanliness around you and in the world around you are very important, but not always pleasant. But there is a way out, and we will show it to you today.
Remove foliage from the paths, debris from the site or other unnecessary things - everything is possible with it! And most importantly, with such a device, any cleaning will turn into a pleasant, and certainly not boring pastime.

Materials-tools

• CD/DVD box;
• Button-switch;
• 5.5 mm connector for power supply;
• Empty metal deodorant bottle;
• Liter plastic bottle (PET);
• Lid from plastic bottle;
• Line segment PVC pipes by 25 mm;
• Hot glue gun, soldering iron;
• Paint knife, scissors, marker, ruler and a small hacksaw.

Getting Started with Blower Making

To begin with, we prepare an empty box of disks. She needs to dismantle the cylindrical axle. We cut it with a heated blade of a paint knife, and break it by hand.

We take a 12 V DC motor, and connect a switch button with a connector for the power supply to it, as shown in the photo.
We fix the engine on the back of the disc platform with hot glue. We glue the case well around the entire circumference.

next step will be cutting a liter plastic bottle (PET). We measure 6 cm from the bottom of the bottle, and cut off a small cap with a paint knife. We don't need the rest of the bottle.

Next, we make several holes from the bottom side in this cap. They are needed for the switch and the charging socket. On the hot glue, we fix the button-switch and the connector for the power supply from the inside of the cap.

We apply hot glue to the outer edge of the cap, and glue it to the back of the disc platform.

From an empty metal deodorant bottle, we will prepare the impeller blades. With a hacksaw for metal, we cut off the bottom and neck of the bottle, and cut the body along with ordinary scissors.

We level the resulting piece of tin manually, and proceed to the markup. With a marker and a ruler, we draw a sheet into eight rectangles with dimensions of 30x55 mm. We cut them out with scissors, biting off the corners on one side of each blade.

We use a plastic bottle cap as a hub. We divide it into eight identical parts with four diagonals. The extreme marking points are lowered onto the edges.

We make a small hole in the center of the hub cap for the motor shaft. We cut the ribs according to the marking with a hacksaw or knife.

We assemble the impeller by inserting the blades into the slots of the cover, and put them on hot glue. We glue the center of the impeller additionally, and then we give the blades a slight slope, bending them manually. This is necessary to provide a greater output air flow.

We make the outlet duct from a 25 mm piece of plastic pipe. The circumference of the disc box lid will serve as a template for the air duct.

We mark it with a marker, and cut it with a hacksaw for metal. Trim the connection with a paint knife.

Each summer resident is faced with a large amount of garbage on his site. It is especially plentiful in autumn, when the time for leaf fall comes, and also in spring, when it is necessary to remove the garbage that has accumulated over several months.

The most acute problem with cleaning occurs for those who have in their dacha a large number of fruit trees and berries. Enjoy ripe and juicy fruits good, but few people enjoy removing leaves from them in the autumn and spring months. Recently, in specialized stores appears modern technology, which helps summer residents in gardening work. Among such equipment there are blowers. Most gardeners are pleased with the cleaning of leaves with a blower.

Blower

A blower is a tool that performs the same function as ordinary rakes, brooms or brooms. With the help of air, she blows the leaves and eventually clears the plantations of fallen leaves and even small twigs. Some modifications of such tools also have the function of sucking garbage into special bags.

What are blowers according to the principle of operation of the engine

At the moment, the manufacturer produces blowers of two types: with an electric motor and with a gasoline one.

In terms of environmental safety, of course, an electric blower is best suited. Unlike gasoline, it does not emit into the atmosphere harmful substances, which are formed during the combustion of fuel. This device works in two modes - blowing and garden vacuum cleaner. With the help of the latter mode, you can easily clear the territory of the site from small debris, and the blowing mode will help get rid of foliage. Also, such a blower has a chopper, which in turn helps to clear the garden from larger branches. However, an electric garden blower has a very obvious disadvantage - it is tied to an electrical power source and cannot work without electricity, which makes it problematic to use it in large gardens. In addition, this invention is not recommended for use when high humidity air.

Better electric blower

The petrol garden vacuum cleaner has gained much more popularity than its electric competitor. This is explained by the fact that its operation does not require electricity, in connection with this it can be used even in the farthest corners of the garden and in industrial gardens, which sometimes spread over several tens or even hundreds of hectares. A small amount of gasoline is needed to operate a petrol blower.

Important! Such a blower is also relatively light - the average weight of such tools is about three to four kilograms. That is why even a few hours of work with it will not cause severe fatigue. Gardeners also appreciate the speed of such garden vacuum cleaners. On average, it is 53-55 meters per second.

Blower operating modes

The standard blower can operate in three modes: direct blower, garden vacuum and chopper.

The blower mode is to ensure that the tool can collect fallen leaves and other small debris in the area in one pile. During the operation of the tool, a large air flow arises, which collects all unnecessary debris in one place. At the same time, the summer resident can control the air masses himself and thus concentrate the garbage in the place necessary for him. Most often, this mode is used in autumn for fallen leaves.

The second mode of operation of such a tool is the mode of a garden vacuum cleaner.

The second mode of operation of such a tool is the mode of a garden vacuum cleaner. This function is also available for all types of blowers. The process of its work is similar to a conventional household vacuum cleaner. During operation, the garbage is swallowed and enters a special garbage bag through a plastic pipe.

In some series there is also a third mode - a chopper. The principle of operation resembles the second mode, however, before the garbage enters the bag, it is finely chopped with the help of special knives. As a result, shredded garden residues can be used as mulch for various plants. However, not all blowers have such a mode. To find out for sure, you should consult with a store employee.

Electric garden blower: the main classification of units

Before buying such a unit, you should pay attention to the features of using such a tool:

• For small areas, a hand blower is best. It is good because it has excellent maneuverability, it is easy to work with it in gardens and alleys. This unit is small. Compactness does not allow a person to be very tired during work. In addition, the device is equipped with a comfortable handle and a belt.
• A gasoline knapsack blower will be good in areas remote from residential buildings and structures. It runs on gasoline and therefore is not tied to the power supply. This unit has enough heavy weight. However, even a weak woman can wear and use it. This is explained by the fact that the garden vacuum cleaner has a special belt system. It is she who saves a person from fatigue, as it evenly distributes the weight of the equipment. As a result, the gardener will not get tired, even if he works for several hours.
• For industrial gardens, powerful cordless vacuum cleaners are best suited. They have, as a rule, wheels, which allow such units to be rolled over the plantations. Such fans have four wheels and one handle. In addition, they have wide nozzles that can clean as much debris as possible. The blower-vacuum cleaner also has the function of a chopper, it processes even large branches well. At the same time, domestic developers also thought of large containers for collecting garden waste, and also introduced sprayers.

Garden vacuum cleaner-blower: how to choose the right one

The choice of garden blower should be approached responsibly. Close attention should be paid to some parameters and aspects. Here are the main ones:

• Plot size. The most important aspect that you need to focus on when choosing a vacuum cleaner for the garden. For small plots (up to two hectares), manual units are well suited. However, if the garden area is more than two hundred acres, then it is recommended to purchase a gasoline vacuum cleaner. If the area of ​​​​the industrial garden is five or even ten hectares, then it is better to purchase a garden vacuum cleaner on wheels for your household.
• The amount of work and complexity is the second aspect that you need to pay attention to when choosing this type of equipment. It is necessary to analyze what will need to be done with this blower (collect garbage in one pile, in a bag, or even grind it).
• Mobility. If the technique is difficult to use, then it will not bring any benefit.
• Parameters - weight and transportation.

Also, experts advise paying attention to the manufacturer of the blower. Today, many companies and factories produce equipment. The ranking of the best brands looks like this:

• hitachi,
• Husqvarna,
• stihl,
• Bosch.

Do not forget to read the instructions before using. After the purchase, you need to conclude with the seller service maintenance and maintenance of the blower. This is required because self repair will cost much more. And not everywhere it will be possible to repair it. For example, the repair of vortex blowers is not carried out by all teams, even in large cities.

DIY blower

You can save money and make a manual blower. If it is made correctly, then in operation it will not be much inferior to purchased ones. To assemble it, you need to take an unnecessary compressor from a vacuum cleaner, plastic pipe, bag, motor and blower filters. You will also need a handle. Putting all these parts together, you get an excellent device that has the same functions as a garden vacuum cleaner from a store.

In order for the tool to still be of high quality and work for a long time, and also not to have to repair the blower soon, you should not rush to assemble it. Otherwise, the unit will quickly fail and all the work will have to be redone. But there is always an option to buy equipment in a store, the main thing is to decide on the model.