How to disassemble the Elenberg iron. Reasons for the breakdown of the iron. Problem - power cord

Nowadays, fountain pens are not as popular as they were two centuries ago, they are rarely used in daily work. Now a fountain pen is an indicator of the status and style of its successful owner, it emphasizes individuality and taste. Often such pens become collectible, for example, and can lie idle for a long time. But instructions on how to refill a fountain pen will be useful to anyone.

Fountain pen refill methods

There are two types and ways of refilling a fountain pen: converter or cartridges. Usually the company, cartridges and converters are produced by the same company as fountain pens, but there are also universal models. The advantage of a converter over a cartridge is its reusability - you buy one converter and use it an infinite number of times. Cartridges, in turn, are easier to use and do not require much effort and time to replace.

Fountain pen with piston converter

1. Before refueling, it is necessary to remove the protective cap of the pen and unscrew the barrel, opening the container of the converter.
2. The pen must be immersed in ink, and then begin to rotate the converter piston clockwise. Under pressure, ink will begin to flow into it.
3. After the container is completely filled, you need to drain a few drops by turning the piston counterclockwise.
4. Final stage- fully screw the piston clockwise, screw the barrel and wipe the pen with a soft cloth.

Fountain pen with replaceable cartridge

The replacement cartridge is a convenient alternative to the piston converter, great for use on the go. Before refilling with a cartridge, it must be disassembled, and the packaging must be removed from the cartridge itself and the working side inserted into the hole located on the base of the pen body. After that, lightly press until a characteristic click and assemble the handle.

And remember, in order for your fountain pen to serve for a long time, you need to carefully monitor and care for it: clean the pen and change the ink in a timely manner.

A standard fountain pen consists of a nib (Fig. 1), a barrel (Fig. 4), a protective cap (Fig. 5) and a converter (Fig. 2) or a cartridge (Fig. 3):

Feather Piston Converter

ink cartridge Barrel

protective cap

To date, Parker (Parker) and Waterman (Waterman) fountain pens use a piston converter of torque action as a reservoir for storing and supplying ink, and ink cartridges (cans) of standard and small volume can also serve as an alternative. The piston converter is designed for repeated use and has a larger volume than ink cartridges. Every owner of a fountain pen is familiar with the process of filling it with ink using a piston converter. An entertaining process requires a little time, a supply of ink in a bottle and a comfortable environment. However, circumstances do not always allow you to have a bottle of ink with you, at such times you can use an ink cartridge. The converter quickly and easily changes to a cartridge, besides, the cartridge has a modest size and you can always keep it with you, which is not always possible with a bottle of ink.

Fountain pen refill

Before refilling a fountain pen with a converter, prepare an ink bottle (bottle of ink) and a tissue. First, remove the protective cap and unscrew the barrel from the pen as shown in (fig.6).

Then completely immerse the pen in the ink tank (bottle with ink), while trying to leave the pen base body above the ink surface as shown in (Fig. 7), then rotate the converter piston counterclockwise until it stops - this will help drain the remaining ink and get rid of bubbles to create a vacuum.

In the same position, rotate the piston clockwise until it stops, thereby filling the converter with ink (Fig. 8). After the converter is completely filled, remove the pen from the ink bottle and gently rotate the piston to drain three drops of ink (Fig.8.1); then turn it all the way in the opposite direction - this will allow a small amount of air to be sucked into the tank (air lock Fig.8.2) in order to prevent leakage. Screw the barrel back into place, remove excess ink from the surface of the pen with a tissue, the pen is ready for use.

Replacing the converter with a cartridge

Remove the protective cap and unscrew the barrel, carefully remove the converter by pulling it away from the pen. Insert the cartridge into the same place, with the colored end towards the pen, with a little effort, press your finger until a characteristic click sound (Fig. 9). The cartridge is installed, screw the barrel and the pen is ready. A previously used converter can be rinsed with cool water and stored until the next use.

How to extend the life of a fountain pen

Pen cleaning is the process of washing the pen through the converter while filling it with water (repeat until the water is clear). Then pat dry with a paper towel. Be sure to use water room temperature, in which case distilled or filtered water will do (tap water may contain particles that can clog the pen nozzles). Then pat dry with a paper towel or tissue. Never use warm and hot water, as well as solvents, alcohol-containing solutions - this will 100% harm the quality of the pen. If a cartridge is used in the pen, then it is necessary to disconnect it from the pen, and place the base with the pen in a glass or other container with clean water for 30 or 60 minutes, depending on how dirty the feather is, while the water level should completely cover the feather. After the procedure, blot dry with a paper towel or towel. If necessary, as it gets dirty, the pen can be soaked overnight. We recommend rinsing the pen every two weeks or whenever you change ink colors.

Despite the fact that ballpoint and gel pens are increasingly used in everyday life, true connoisseurs of writing instruments prefer to work with fountain pens so that they can write beautiful handwriting. Parker ink pens are especially popular, as the stationery of this company is an attribute of prestige. To really enjoy working with such writing instruments, you need to know not only how to fill a fountain pen with ink, but also how to insert and use it correctly. You will learn about all this from this article.

Types of pen cartridges

Let's dwell on the description of the cartridge so that it is easier for you to pick it up in the stationery store. The cartridge is a plastic cylinder with straight or rounded walls. At the factory, the tank is filled with ink for fountain pens.

Important! Cartridges are also produced with special calligraphy ink, but such capsules are not recommended for use with pen writing instruments.

The main differences between all cartridges (except for color, of course) are:

1. physical dimensions.
2. Working flange shape. On the one hand, the capsule has a blind end, and on the other, a flange that is put on the handle feeder needle or simply inserted into the handle. Inside the flange there is a simple device that locks the ink inside the capsule. Constipation is of two types:
   • Thin membrane.
   • A small ball of plastic (sometimes metal). After the ink gets inside the barrel, the ball moves freely inside the capsule and mixes the ink, preventing it from sticking to the walls.

Important! Many manufacturers of stationery make money not only by selling fountain pens, but also by selling cartridges for them. Therefore, some companies develop writing accessories for their own cartridge standard.

The most common cartridge standards are:

• International. This name is unofficial, since many manufacturers from Europe, America, China and India produce pens to this standard.

Important! The most popular short capsules are "International", they are most often found in the stationery store.

• Parker. Cartridges of this standard are available in two types - short and regular. The "Parker" standard is used in Lamy pens, but only in the short version, as the shape of the back of some pens does not allow the use of regular capsules.
• Sheffer standard. Although many Schaeffer pens can also use International standard (short) cartridges.
• The American company Cross has its own cartridge standard. The stepped shape of the working flange successfully resists all attempts to use capsules from other manufacturers in Cross handles.
• The cartridges of the Japanese company Pilot are distinguished by their corporate standard. In addition, the company produces special shortened cartridges for mini-pens of its own production.
• The Platinum company (Japan) is also distinguished by its standard. In addition, only in the cartridges of this company, metal balls are used, which, when the tank is empty, begin to knock and notify the owner of the need to replace the capsule soon.

Important! In addition to the above, there are at least a couple of types of cartridges from various companies that are designed specifically for their own fountain pens, these are Sailor and Waterman.

How to fill and paint a fountain pen?

How to insert and change the rod? There are several different types of ink available in stationery stores, varying in consistency, hue, and quality. To refill a fountain pen with ink, use products labeled “for fountain pens” (“fountain pens”). The filling method depends on the filling mechanism.

Important! When buying a new cartridge for your pen, be sure to use only the ink tank that fits the shape and size of your pen so that replacement is quick and easy.

Method 1

If the handle has a piston filler, then proceed as follows:

1. Disassemble the body of the pen.
2. Turn the ink piston located inside the housing counterclockwise.
3. Dip the pen completely into the ink bottle.
4. Turn the clamp all the way in the opposite direction.
5. Unscrew the clamp slightly (until the first drop appears) to remove air from the container.
6. Remove the pen from the vial, wipe it with a cloth.
7. Assemble the handle in reverse order.

Method 2

If the fountain pen has a refill converter, proceed as follows:

1. Remove the protective cap and free access to the converter.
2. Dip the pen into the inkwell.
3. Turn the converter head to the right.
4. Remove the air from the tank by releasing a couple of drops of ink.
5. Clean the pen with a paper towel.
6. Collect the pen.

Important! This instruction will be relevant if you need to refill the Parker pen with ink. And if you didn’t manage to do everything neatly, view a separate publication on our website, which outlines effective methods, to .

Method 3

The replacement cartridge is inserted into the writing accessory very simply:

1. Remove the top case.
2. Remove the used cartridge.
3. Paste new capsule to the click.
4. Wipe the pen dry.
5. Twist all the details of the fountain pen.

Important! Such models are also found in the eminent Parker brand.

Rules for using a fountain pen

To prolong the life of your writing accessory, follow these guidelines:

• Be sure to clean your pen. This procedure is a rinsing of the pen through the converter. The tank must be filled with water and flushed until the water is clear.

Important! Use distilled or filtered water at room temperature to rinse the pen. After rinsing, blot the pen with a paper towel.

• If the pen uses a cartridge, it must be removed before washing the pen. In this case, place the base of the pen in a glass of clean water for 30-60 minutes (depending on contamination). The water level must necessarily cover the pen. After the washing procedure, blot the pen dry with a paper towel. If necessary, you can soak the pen overnight.

Important! Never use hot water, solvents, and alcohol-based pen cleaning solutions, as these may affect the quality of the pen. Also don't use tap water because the metal particles it contains may clog the pen nozzles.

• Flush your pen every two weeks or when you change ink colors.

If we talk about how to properly use a Parker fountain pen or another model of an “ink pen”, then experts and manufacturers recommend the following:

• Do not press hard when writing to avoid damaging the pen. A quality pen should glide easily over the paper.
• It is not recommended to use one year old ink. Use only fresh product. If the ink has not been used for some time, and there is no coating on it, then first stir it and make sure that there are no clots or sediment at the bottom of the bottle, and then apply.
• Do not allow black ink to dry inside the pen as this may cause permanent damage. The black ink contains gum arabic, which has adhesive properties. If such a filler dries inside the handpiece, the damage will be irreversible.
• If you don't plan on using your writing accessory for more than a couple of days, rinse your pen to prevent the ink from drying out.
• Store ink away from sunlight to avoid drying and fading.
• Do not write on chemically treated paper that has a glossy finish. This paper does not absorb ink.
• If you are traveling by plane, then do not fill the converter completely, it is better to leave it empty to reduce the risk of ink leakage. Hold the pen vertically while the plane is taking off. If you choose to use a fountain pen while flying, hold the pen upright when opening it and slowly remove the protective cap.

Important! To ensure that your clothes are always neat and you can easily clean them in the most unforeseen situations, use our selection of tools and methods that will help

The Parker pen or any other ink analogue is far from being a writing instrument, rather, it is a stylish accessory. business man. Parker ink retains saturation for a very long time, and is absorbed into the paper instantly. They do not spread over the paper and correspond to the design of the pen in terms of density. Use your writing accessory with pleasure, and we told you how to fill it with ink. Use our advice and recommendations, and the fountain pen will serve you for decades!

Many modern people prefer to use ballpoint pens, but there are those who still prefer the finesse, clarity and individual style of fountain pens. Instead of a ball, a sharp nib is installed at the end of such a pen, leaving behind lines of varying thickness depending on the pressure on the pen, writing speed and the direction of specific strokes. In addition, the fountain pen can be refilled with ink many times, so it can last a lifetime. However, the application of a fountain pen is somewhat different from that of ballpoint pens. When you learn proper writing technique, it will become noticeably easier for you to write with a fountain pen.

Steps

Part 1

Get the pen right. Remove the cap from the pen and take it in your main hand, holding it gently between your thumb and forefinger. In this case, the body of the pen should rest on the middle finger. Rest your fingers on the paper to stabilize your hand.

Place the pen nib on the paper. This may seem simple enough to do, but the construction of a fountain pen is somewhat more complicated than that of a ballpoint pen. Because of the pointed nib instead of a ball at the end, the pen must be properly pressed against the paper in order to be able to write with it. This is the so-called optimal position.

Hold the pen firmly. When writing, there are two ways to control a pen: with your fingers or with your hand as a whole. When you work with a ballpoint pen, it is quite possible to get by with just your fingers, because thanks to the ballpoint, the pen will write in any position. But the fountain pen must be controlled with the whole hand in order not to miss the optimal position. So use the tips below.

• When the pen is in your hand, keep your fingers and wrist still, using your entire hand to move the pen as you write. Practice writing in the air first and then on paper to gradually get used to writing with your whole hand.

1. Lightly press the pen while writing. It is not necessary to apply much pressure to the fountain pen, however, you must apply some pressure to the pen in order for the ink to flow into it. Gently press down on the pen and start practicing writing with a fountain pen.

   Part 2

   How to fill a fountain pen with ink

   1. Determine the type of fountain pen. To date, there are three types of fountain pens on sale: with cartridges, converters and a built-in piston system. The difference between the two lies in the ink supply system and the way the pen is filled with ink when it runs out.

      • Fountain pens with cartridges are currently the most common, as cartridges are the easiest to change. To write with this type of pen, you will need to buy ready-made ink cartridges and periodically change them in the pen when the ink runs out.
      • Converter pens are equipped with a reusable cartridge that is inserted inside. They're fine if you don't mind refilling the ink cartridge yourself every time you run out of ink.
      • Piston pens are similar to converter pens, except they have a built-in refill system so you don't have to replace the refillable cartridge with a converter purchased separately.

   2. Replace the cartridge in your fountain pen. First, remove or unscrew the cap from the pen, then unscrew its body. Remove the empty cartridge from inside. Then follow the steps below for the new cartridge.

      Fill the piston handle. Remove the cap from the pen and, if necessary, the additional cap on the back of the pen that covers the piston mechanism. Turn the plunger adjuster (usually counterclockwise) until the plunger is at the writing end of the pen. Then follow the steps below.

      • Dip the pen nib completely into the ink bottle so that the ink covers the hole in the base of the nib.
      • Start turning the plunger clockwise to draw ink into the pen.
      • When the ink tank is full, remove the pen from the ink bottle. Turn the plunger counterclockwise a little again to push a few drops of ink back into the jar. This will allow you to get rid of air bubbles.
      • Wipe the ink off the pen with a paper towel.

   3. Fill the converter pen. There are two types of converters in fountain pens: with a piston mechanism or with a pipette refilling system. To refill a pipette pen, remove the cap from the pen, unscrew the barrel, dip the pen in ink, and then follow the steps below.

      • Slowly press down on the ink tank and wait for air bubbles to appear on the surface of the ink.
      • Slowly release the ink tank and wait for it to fill with ink.
      • Repeat these steps until the reservoir is full.

   Part 3

   How to use pen nibs

   1. Choose the right pen for everyday writing. There are many different types nibs for ink pens, which are designed to be used in different situations and to create a variety of effects. For daily writing, opt for:

      • a pen with a rounded end, leaving behind uniform lines;
      • a small pen that writes with thin lines;
      • a stiff pen with a little bit of flaring to the sides so it won't break under pressure when you press it in an attempt to create thicker lines.

   2. Choose pens for decorative writing. To write in decorative or calligraphic handwriting, pens used for everyday writing will not work for you. Instead, opt for one of the options below.

For many Parker owners, refilling a pen has become a ritual. True "gourmets" of this action will never switch to using a ballpoint pen. To use ink, which are sold in special vials, the design of the pen provides for a reservoir.

Refueling systems

Refueling mechanisms are called convectors. They come in two types: standard piston and rotary mechanism. This difference relates to how the piston moves inside the tank. The meaning of the filling is always the same. An empty tank needs to be filled with new ink.

They flow out gradually in the course of writing. The time between refills depends on how much you use the pen. No air enters the tank. Therefore, if the cap is closed, the ink inside will never dry out. A refilled pen is always ready to write, even if it has been in the case for a long time.

5%

Parker refill with rotary filler

The sequence of action is very simple:

• unscrew the body sleeve;
• lower the pen with the pen down;
• turn the mechanism so that the piston moves down;
• release all the air from the tank, bringing the piston to the stop;
• dip the pen into the ink bottle;
• turn the mechanism in the opposite direction;
• push the piston to the maximum, until it stops;
• remove the pen from the ink tank.

Do not dip filler into ink. Make sure that the pen is completely immersed in the inkwell. This will prevent air from entering the filling system.

When the pen is removed, be sure to drain a few drops of ink. To do this, lower the pen down again and turn the mechanism so that the piston moves a little inside the tank. This way you squeeze out a few drops. When you see that the ink has dripped into the vial, return the piston to its place. Just screw it all the way in.

Very little air will enter the tank. This is necessary to create an air cushion inside it. It will hold the ink, and will not allow them to spontaneously flow out.

5% Especially for readers of our blog, a 5% discount on the entire range of the store using the promo code BLOG

Parker filling with sliding piston

The filling principle is the same. The difference is that the piston is not screwed into the filler reservoir, but is fed into it by direct pressure.

Both filling systems are equally reliable. After the pen is filled, you need to thoroughly clean the pen. For this, special porous paper is used. It instantly absorbs ink, and there is no trace left on the surface of the pen.

It is the need to clean the pen that scares some users. They are simply afraid of getting dirty. For them, the manufacturer offers a completely different filling system that uses sealed capsules.

5% Especially for readers of our blog, a 5% discount on the entire range of the store using the promo code BLOG

Capsule refill

A special capsule is inserted inside the case. That way you don't have a chance to get your fingers dirty. After screwing the body, the capsule is depressurized. This is how the supply of fresh ink begins. Each capsule has a spare reservoir. To use it, just press a small lever. The spare ink will come to the pen. You will be able to write about a page of handwriting.