Storage water heater Haier ES80V-R1(H) - Reviews. An indispensable, reliable assistant
Among the brands that everyone hears about, there are those that are rarely heard. Nevertheless, this does not prevent them from producing excellent household and climatic equipment of various levels. One such brand is Haier. Under it, a wide range of equipment is supplied to the market - from TVs to air conditioners. Haier storage water heater will be an excellent solution for preparing hot water in your home - evidence of this are the numerous reviews of users and professionals.
Haier products
Haier was founded in China in 1984. Nowadays, its products are appreciated by many specialists and users. Being not the most famous in Russia, the company supplies excellent household appliances to the Russian market, literally licking every model to the smallest detail. It also produces electric water heaters, which are actively used in everyday life and commercial facilities.
Consider the main advantages of Haier water heaters:
- Thoughtful design - there are samples on sale that differ in an interesting appearance.
- Multi-stage consumer protection - Haier appliances protect against burns and electric shocks.
- A multi-year warranty is another confirmation of the high reliability of water heaters from this brand.
- Efficiency - the energy-saving technologies used make Hyer water heaters more economical, which affects energy consumption.
- Multi-layer protection of tanks against corrosion - ensures a long service life of the equipment.
Haier doesn't churn out models one after the other like so many others do. The company pays attention to each sample, bringing the technique to perfection. As a result, inexpensive, but reliable water heating equipment is born.
The choice of consumers are the following categories of water heaters:
- With a flat design - for housing with thoughtful interiors.
- With accelerated heating of water - for those who do not like to languish in anticipation.
- Small volume - for a summer residence or kitchen, as well as for organizing hot water supply for periods of hot water shutdown.
- Vertical and horizontal - in accordance with the needs of customers.
- With electronic control systems - accuracy and advanced functionality.
Let's look at the most popular models from Haier in more detail.
Before us is a simple, but no less attractive water heater. Model features - mechanical control system, vertical mounting, bottom connection water pipes, the ability to work with several points of water intake. The capacity of the built-in tank is 80 liters, which is enough for a family of 2-3 people. The water in the tank can heat up to +75 degrees, there is a thermostat on board that limits the heating.
The water heater is well protected from water leaks, the guarantee for it is 7 years. The tank is made of stainless steel - this is a guarantee reliable protection from corrosion. It also has a magnesium anode. The number of heating elements is 2 pieces, it is possible to work in low power consumption mode. The boiler from Haier maintains its performance in the supply voltage range from 175 to 242 V. It practically does not affect the water pressure, its nominal value at the inlet is 0.8 MPa.
Before us is the popular Hyer water heater with a capacity of 50 liters. This volume is optimal for a family of two, but it can also be used by three consumers - neatly, economically, in turn. The device is made in a vertical cylindrical case with a lower location of the controls - here you can also see the light indicators. The thermometer is located at the top, as in most models with mechanical control.
The boiler from Haier can heat water up to +75 degrees, it is possible to adjust the temperature to your liking - there are convenient handles on board for this. Permissible inlet water pressure is from 0.1 to 7.5 atmospheres. The tank in this model is made of ordinary steel, covered with resistant enamel. It should be noted that Haier uses high-strength enamel. In addition to it, a magnesium anode is installed in the tank. Protective systems - from overheating, from high pressure.
Haier storage water heater with a flat design - for those who appreciate excellent appearance and compact technology. The device is mounted only vertically, pipes with hot and cold water lead up to it from below. Here we see advanced electronic control - temperature adjustment buttons, an accurate electronic thermometer, an indication board. Maybe someone accuses such boilers of reduced reliability, but they are economical and easy to use.
Haier has endowed the water heater with protection against running without water. The manufacturer also supplied the boiler with especially powerful heating elements - 2 pcs. 1.5 kW each. This ensures the fastest preparation of water. True, the device turned out to be relatively heavy - when empty, it weighs 40 kg (there are models that are lighter). But there is a function of accelerated heating, which is an additional plus. Also, the water heater is endowed with Safe Care technology - you can not be afraid of accidental electric shocks.
Touch control, very convenient and easy - this device has won a lot of positive feedback from established customers. The warranty period for the water heater from Haier is 7 years.
This simple cylindrical water heater has received the highest number of consumer ratings. And more than 90% of these ratings are positive. That is why he took a place in our review. The boiler is built on the basis of a stainless steel tank, supplemented with a magnesium anode - a kind of multi-stage corrosion protection. There is only one heating element on board, its power is 2 kW. Degrees of protection - from overheating of water, from switching on with an empty tank.
The water heater is endowed mechanical system temperature control. It is not as accurate as electronic, but it reduces the cost of equipment. Haier specialists endowed the device high level reliability - consumers are not ready to exchange it for analogues. They note the following details:
- Long-term heat preservation without electricity.
- Silent operation (however, it depends on the state of the heating element).
- Ease of installation and connection.
- No problems in operation.
In a word, this is an excellent water heater, which is confirmed by the reviews of the owners.
Sometimes water heaters act as auxiliary sources of hot water. For example, in the summer, when utilities start another cycle of repair and restoration work. This water heater is compact - its capacity is only 8 liters. This is a typical kitchen model that provides water for washing dishes. A productive heating element with a power of 1.5 kW is responsible for heating the water. The baby tank from Haier is made of stainless steel.
This water heater is perfect for country use - it is suitable for washing hands after working on the site or for washing dishes after dinner. It will not be enough to take a shower, even if you use water to a minimum. The maximum heating temperature is +75 degrees, in the upper part of the boiler there is a convenient adjustment knob. The device from Haier can operate at water pressure up to 8 atmospheres.
This device is dressed in an elegant cylindrical body elongated in height. It is mounted vertically, all connections are made from below. The consumed electrical power is 2 kW. The boiler from Haier copes with heating a full tank of water to a predetermined temperature in 2-3 hours. The temperature is controlled by precise electronics. The control panel, like the body, is elongated in height - it looks extremely organic.
Developers from Haier have endowed the water heater with multi-stage protection against electricity leaks. Now consumers can not be afraid that in the process of taking a shower they will accidentally be shocked. The boiler is ideal for taking shower procedures - its capacity is 80 liters. This is enough for two or three people. If there are four people in the family, you will have to line up - you will have to wait until the water temperature is restored after the third consumer.
If all previous models were electric, then this boiler belongs to indirect heating water heaters. It is compatible with gas and liquid heating boilers. To ensure rapid water preparation, Haier specialists endowed the boiler with a giant heat exchanger - its area is 1.5 square meters. m. The tank is made of ordinary steel, protected by an enamel coating.
The water heater turned out to be surprisingly light - its weight without filled water is 12.5 kg. It is installed on the floor, in a vertical position. The pressure in the tank should not exceed 8.5 atmospheres, otherwise a reduction gear is installed at the inlet. outside heating period water heating is carried out using a heating element - it is purchased and installed separately, in the corresponding flange. The indirect heating boiler from Haier turned out to be expensive - its cost is about 55 thousand rubles.
Bought this unit yesterday. I chose between 50l and this, since I can only hang it over the toilet, then the fastening should be super reliable (especially if 110kg (29.5 heater + 80l of water). But there are just problems with this: the wall is load-bearing, but ... 1 cm tile + 1.5 cm tile adhesive + 2 cm plaster (very loose with a fingernail) then goes concrete block very durable, but its problem is that it is hollow for thermal insulation. those. theoretically, if you don’t hit him in the rib, most likely it will be another 2 cm, then an air cavity. But given that a regular anchor 6.5 cm will have to hang with a pinched end for 2 cm of brick, then the entire load on tile. I bought down two 15 cm anchors up 14 cm hook on a regular plastic dowel. Hung it up firmly. I think it will hold up to three loads. Now about the good. I decided not to use any hoses due to their unreliability. I decided to mount all the connections with plastic plumbing. It took ~ 1200 rubles for all pipes / corners / couplings and taps. But now everything is reliable and looks beautiful. After all the connections, he blocked the hot water inlet from the system, and instead opened the tap from the heater outlet. He opened the inlet tap of cold water and heard the pleasant sound of filling the tank with water. When cold water poured from the hot tap in the bathroom, I realized that the unit was full and blocked it. The thermometer needle first slowly crawled to the left and stopped almost at the beginning of the blue indicator. Then, very slowly, she began her return journey. Nothing leaked from the safety valve at first. I pulled back on its lever to see if it worked. Water slowly filled the hose and ran further into the sewer. The time is already late, and the thermometer needle is crawling to the right very slowly. I periodically opened the hot faucet to check the temperature of the water. She gradually warmed up, but then practically remained room temperature. After 1 hour 10 minutes after the start of heating, the thermometer passed the pink zone and came close to the red one. And the water is still cold. But on reflection, I left the hot tap open for a few seconds longer and the miracle happened! The water cooling in the pipe between the unit and the bathroom drained and very pleasant hot water flowed from the tap. My wife immediately ran to swim :) It's very nice to wash not from a basin 3 weeks before the official start of hot water. At night, just in case, I disconnected the unit from electricity and turned off all the water. PS. At the end of my shower, the water got a little colder (to maintain a comfortable temperature, I had to gradually change the balance of hot and cold water. But in fact, we can state that in 1.5 hours from the start of the operation of the unit, 2 adults managed to wash themselves and still the water remained warm enough for swimming , although the thermometer dropped below the pink zone and invaded the blue zone by 1/4.
Bought this unit yesterday. I chose between 50l and this, since I can only hang it over the toilet, then the fastening should be super reliable (especially if 110kg (29.5 heater + 80l of water). But there are just problems with this: the wall is load-bearing, but ... 1 cm tile + 1.5 cm tile adhesive + 2 cm plaster (very loose with a fingernail) then comes the concrete block is very durable, but its problem is that it is hollow for thermal insulation, i.e. theoretically, if you don’t hit it in the rib, most likely it will be another 2 cm, then the air cavity.But given that the regular anchor 6.5cm will have to hang with a pinched end for 2 cm of brick, then the entire load on the tile.I bought two 15 cm anchors down 14 cm up a hook on a regular plastic dowel "I hung it up firmly. I think it will withstand a triple load. Now about the good. I decided not to use any hoses because of their unreliability. I decided to mount all the connections completely with plastic plumbing. It took ~ 1200 rubles for all pipes / corners / couplings and taps. But now everything is over soft and looks beautiful. After all the connections, he blocked the hot water inlet from the system, and instead opened the tap from the heater outlet. He opened the inlet tap of cold water and heard the pleasant sound of filling the tank with water. When cold water poured from the hot tap in the bathroom, I realized that the unit was full and blocked it. The thermometer needle first slowly crawled to the left and stopped almost at the beginning of the blue indicator. Then, very slowly, she began her return journey. Nothing leaked from the safety valve at first. I pulled back on its lever to see if it worked. Water slowly filled the hose and ran further into the sewer. The time is already late, and the thermometer needle is crawling to the right very slowly. I periodically opened the hot faucet to check the temperature of the water. She gradually warmed up, but then practically remained at room temperature. After 1 hour 10 minutes after the start of heating, the thermometer passed the pink zone and came close to the red one. And the water is still cold. But on reflection, I left the hot tap open for a few seconds longer and the miracle happened! The water cooling in the pipe between the unit and the bathroom drained and very pleasant hot water flowed from the tap. My wife immediately ran to swim :) It's very nice to wash not from a basin 3 weeks before the official start of hot water. At night, just in case, I disconnected the unit from electricity and turned off all the water. PS. At the end of my shower, the water got a little colder (to maintain a comfortable temperature, I had to gradually change the balance of hot and cold water. But in fact, it can be stated that in 1.5 hours from the start of the operation of the unit, 2 adults managed to wash themselves and still the water remained warm enough for swimming, although the thermometer dropped below the pink zone and invaded the blue zone by 1/4.
Accumulative water heaterHaier ES80V-R1(H) is a device you can't help but fall in love with. Beautiful, strict design, large capacity, excellent pressure, high heating rate to the desired temperature - what else is needed for a comfortable shower?
An indispensable, reliable assistant
The water heater will easily satisfy even the most demanding requirements. has a number of positive qualities:
- compact dimensions (diameter 37 cm) with a volume of 80 liters (freely enough for daily leisurely use by a family of 4 people);
- protection of the tank from overheating, high pressure, scale formation;
- user protection in case of electric current leakage;
- wide operating pressure range (from 0.5 to 7.5 bar);
- easy installation, the presence of the necessary fasteners in the kit;
- silent operation.
The three-layer tank keeps the temperature like a thermos, which will bring additional benefits after purchase. The water heater is definitely worthy of attention.
In our marketplace you can buy "accumulative water heater Haier ES80V-R1(H) white" in Moscow. Cashback up to 1105 bonus rubles. The product is available among 2 online stores. Prices start from 9850 rubles