Lots of DIY photo frame ideas. Buy? Not! It's time to create practical beauty with your own hands: tips on how to make a frame for a picture DIY wooden frames made of wood

Contemporary artists often sell unframed paintings. They believe that a person himself has the right to choose which frame to use, and whether it is necessary at all. In specialized stores, you can buy ready-made picture frames, but they are of a certain size. And if the canvas does not match them, then you have to somehow get out of the situation. Best Option Do it yourself, it's not hard. So a person will receive a worthy frame for the picture. required size, as well as a design that he thinks fits perfectly.

Now we will describe in detail how to make a frame for a picture with your own hands from wood. This is classic stuff. From it began to make the first frames even when art was just emerging. So let's start with it.

Choice and quality of material

First you need to pick up rails. The wood for their production is not kept in a certain way, therefore, in places where there are knots, cracks and bumps appear during the subsequent drying of the material. It is for this reason that it is necessary to carefully select material that does not have flaws. However, if in the frame design you need to show exactly the structure of the wood fibers, then it is better to make the slats for the baguette yourself. Such production of picture frames requires the presence of seasoned wood, only in it the knots do not have cracks, because it was dried using a special technology throughout the year.

How to create a frame profile

To turn the slats into a wooden baguette, from which the frames will be made, use milling machine. Curly cutters are sold especially for him, which are able to cut through any recesses and create the necessary pattern on the surface. The profile of the product can also be given hand tools. To do this, use special planers, zenzubels, as well as moulds.

Tools for creating corners when cutting a baguette

Wooden picture frames must have right angles, unless, of course, their shape should be traditional. It is very difficult to cut a baguette and maintain exactly the degrees of its corners. To do this, it is better to use a special tool, such as a miter saw. It is not cheap, but the result justifies the money. But still, how to make a frame for a picture with your own hands without a special machine? If such production is not included in the plans, then it is not advisable to buy such an expensive tool. Therefore, it is better to purchase a miter box for sawing a baguette. If, nevertheless, it was not possible to cut the corners perfectly, then they can always be finalized on sandpaper. It will allow you to carefully sharpen the corner so that everything fits together.

Gluing the frame and the tools needed for this

Now the manufactured frame parts must be glued. Titebond II is ideal for this and has been tried and tested by many woodworkers. It is very important to tightly clamp all parts of the frame. To do this, use a special tool - tape clamps. They allow you to evenly and tightly tighten all parts of the frame, to maintain perfectly right angles. This simple device easy to use, even if the frame for the picture is made of plinth. And it doesn't matter if it's plastic, foam or wood. The most important thing is to initially cut out even corners. You can also fasten the frame without glue; for this, metal corners are used, which are driven into the connection. However, such a fastening is not as reliable as gluing.

Finished product grinding

When the glue dries, you need to sand the entire surface of the frame to give a smooth and beautiful view. To do this, use the finest sandpaper, the basis of which is fabric. It is better to clean in small segments - it is easier to penetrate into the corners and profile relief.

Frame surface finish

How to make a frame for a picture with our own hands, we understood in detail, and now, as for its decoration and coating with a protective compound. To do this, use stain and varnish. If you need to achieve dark color, covered with stain, and then with varnish. When they want to leave the natural color of the wood, they take a transparent varnish - then all the fibers seem to stand out a little, create an excellent look. If you want to add color to the frame, for example, make the tree pinkish, then you can add a little potassium permanganate to the varnish. All compositions that are applied must be of the highest quality. If you take cheap ones, you can easily ruin the frame. If everything is applied to the surface with a spray gun or airbrush, then the risk of damage to the product is reduced due to the smallest spray.

carved frames

Making carved picture frames will require special tools. Such work cannot be automated, so practical skills in wood carving are needed here. Masters for such a craft use a variety of chisels, chisels various forms and sizes. This is a very delicate work, where not only skills are needed, but also an understanding of the arrangement of wood fibers. Therefore, creating such a frame is much more difficult.

Creating a carved frame

First of all, on the workpiece they draw or translate the image that is going to be cut out. After that, it is cut with a jigsaw. Well, then they start the most difficult part - woodcarving. This process cannot be described in words, it can only be comprehended in practice. It is better to start with simple drawings and gradually move on to more complex ones. Now as for the tree. For carving, only seasoned material from soft rocks (for example, lindens) is taken. All other processes are identical with the above.

The presented picture frames, the photos of which clearly display all types of their coatings, as well as the main forms, look simply amazing. The main thing is to want and try.

We fully understood how to make a frame for a picture with our own hands, now it remains to assemble all its parts. To do this, you need to lay the frame face down on a clean surface and insert everything in the following sequence:

• glass;
• painting;
• piece of cardboard.

After that, everything must be fixed with carnations driven into the frame. This is a fairly responsible process, so it is worth dwelling on it in detail. To successfully fix the picture in the frame, you need to be careful and accurate. After all, making picture frames is a rather time-consuming process, not to mention painting canvases, so you need to do everything perfectly.

We bait the carnation on the frame with light blows. It should press the cardboard, picture and glass tightly enough. Then a ruler is slipped under this baited nail. A hammer head is placed on top and, gently sliding over the surface, they strike until the nail is driven deep enough so that it can hold everything tightly. Thus, all the nails that are necessary to tightly hold all parts of the picture are hammered.

In this article, we have analyzed in detail how to make a frame for a picture with our own hands and assemble it. It remains only to do everything in a practical way and get what you want.

If you want to make a wooden frame with your own hands, then you can explore several manufacturing options and choose the right one. At first glance, it is easier and faster to buy a finished wooden frame in a store, but in fact, it will not be difficult to make such a product, moreover, the required size (even non-standard ones), and you can decorate the frame to your liking. If you have a large collection of photographs at home that you plan to hang on the wall, then you will need a lot of frames, and this will cost money. The way out of the situation will be independent production framework.

Wooden frames can be made with simple tools or using a woodworking machine. The finished frame can be decorated with intricate carvings or a beautiful ornament can be burned out. Such products are within the power of masters, and for beginners it is better to try their skills on the example of a simple wooden frame made of smooth planks or slats.

simple wooden frame

To make such a frame, you will need: smooth wooden planks, a ruler or tape measure, a saw, a miter box, if necessary, a planer, a simple pencil, staples for a stapler, thick cardboard or a piece of fiberboard, metal clips, twine, sanding paper, paint, varnish and decorative elements for frame decorations.

How to make a wooden frame

• They estimate the dimensions of the frame and select the transverse and longitudinal wooden planks. You can cut a wooden lath into four elements. All parts of the future frame should be as smooth as possible, so if necessary, they can be trimmed and then processed with sanding paper.
• Saw off the ends of the wooden planks at an angle of 45 degrees. In order for the corners to be even and the product to come out neat, for this it is better to use a special device - a miter box with suitable connectors.
• The ends of the strips are smeared with PVA glue and pressed tightly at an angle of 90 degrees. To fix the corners, the frame should be tightly tied with twine, making sure that the corners do not move. Can be used to fix the corners of the staple halves from the stapler. They are cut into two L-shaped halves. Further, these corners are inserted into the middle of the cuts at the ends of the wooden slats, and then the two sides of the frame are connected.
• PVA glue hardens for 15-20 minutes, and after that the frame is once again treated with sandpaper and coated with paint or varnish. You can use stain or potassium permanganate, which also gives wooden products beautiful brown shade.
• The reverse side of the frame is cut out of thick cardboard or a piece of fiberboard. If the design is not supposed to be collapsible, then you can glue the back side with glue to the frame, and special metal clips are used for the collapsible frame.

Wooden frame with passe-partout

Such a frame is well suited for decorating photographs, as it will emphasize the expressiveness of both color and black and white photographs. Before starting to make a frame, it is necessary to carefully consider not only the size of the frame, but also its pattern, as well as the color of the mat.

This decorative frame is made of wooden planks and thick cardboard (for passe-partout). Profiles for a wooden frame can be very different - smooth, with carvings or patterns, the type of passe-partout also differs - thickness, color of cardboard, its pattern. In this regard, you can choose such details of the frame that will be in harmony not only with the photograph or painting itself, but with the entire interior of the room. This is especially true if you plan to hang several paintings - they must be combined with each other. For example, light wooden frames look good on dark walls or surfaces of saturated color. Accordingly, on light walls, you can hang pictures and photographs in dark frames.

How to make a passe-partout frame

Photography in our life is of considerable importance - for what, if not a photograph, reminds us of some of the memorable moments of our life captured on it? ..

A photograph is a bright and beautiful reminder of a vacation or weekend spent, especially if it happened in the bosom of natural beauties…

An excellent addition and a worthy frame to your photos of this kind can be the wooden photo frame offered below.

It can be an interesting and useful gift for an experienced tourist, an avid fisherman or hunter, as well as decorate the interior of your wooden house or baths (see photos 1, 2 and 3) .

With the help of very inexpensive tools and devices, following the following step by step technology, you can make a similar thing for your home from the ubiquitous material - branches.

First you need to select the material - since it is almost everywhere and ubiquitous, then this should not be a problem.

Preferences are such that it is more desirable to select healthy hardwood branches with bark, cut down in winter. They should be moderately even - but it is better if they have a slight curvature. The branches should be about 4-5 cm in diameter and have well-preserved bark. Moreover, it is more desirable that the bark is not smooth, but even better if there are also pieces of moss or lichen on it - in this case, the frame will be more expressive.

We cut the branches found into blanks of about 40-50 cm and dry them for some time (about a month) in a warm room.

After some drying, you can start working. We cut off the blanks in length, with an allowance of 2-3 cm. Since the photo has dimensions of 20 * 30 cm, we cut off long blanks of about 46 cm (30 cm photo length, 10 cm for two joints, and 6 cm for two tails) , and short - about 36 cm (similar to the previous size, minus 10 cm). We measure the required length with a tape measure and cut it with a hand saw for wood (see photos 4 and 5) .

Next, we cut out planes on the blanks using a universal woodworking machine, or using a manual electric planer (see photos 6 and 7) . The thickness of the workpiece should be approximately the same.

Of course, when working on a machine and with power tools, one should not forget about safety regulations .

After pre-treatment, you need to let the blanks rest a little and dry, if necessary. After a few days of exposure, we check the evenness of the planes - if necessary, align them again.

Now let's start making connections. The connection is simple - half a tree, and in this case it does not require special accuracy and accuracy.

To begin with, we make markings - we put a sheet of paper or thick cardboard measuring 20 * 30 cm on the unfolded blanks and mark the place of the cutouts on the lower blanks (see photos 8 and 9) .

With a hacksaw for wood, we make several transverse cuts according to the applied markings by half the thickness of the workpiece (see photos 10 and 11).

wood saw prices

wood saw

Now with a sharp chisel, with the help of light blows of a mallet, we cut off excess material (see photos 12 and 13) .

In the same way, we mark and make cuts on the remaining two blanks and remove excess material with a chisel (see photos 14 and 15) .

As a result of these simple operations, four blanks are obtained with cutouts for a “half-wood” cross-joint. (see photo 16) .

On a flat plane, we lay out the workpieces in the same order as during the marking and fasten them at the joints with the help of wood screws (see photos 17 and 18) .

Learn the advice of professionals from our new article on our portal.

The planes of the blanks after fastening should be in the same plane - if this is not the case, then we adjust the joints with a chisel (see photo 19) .

Now it is necessary to cut a recess for inserting glass from the inside of the resulting structure. To begin with, we mark the contours of the future recess with a sheet of paper and outline its boundaries with a pencil along the ruler, adding 2-3 mm on each side (see photos 20 and 21) .

We set up a manual milling machine - we install a groove cutter in the collet and set the milling depth equal to the thickness of the glass and the photo (see photo 22) .

With the help of a square, we set the stop for even milling and fix it with self-tapping screws (see photos 23 and 24) .

Prices for chisels

chisel

Pressing the sole of the milling machine to the stop, carefully mill the recesses on all four workpieces (see photo 25) .

We cut corners and burrs with a sharp chisel (see photos 26 and 27) .

After that, with coarse-grained sandpaper, we grind the remaining pile and uncut fibers. (see photo 28)

We cut off the “tails” with a hacksaw, making them approximately the same length 3-4 cm (see photo 29) .

With an electric planer or a sharp chisel, we form beautiful endings of the “tails” at the ends (see photos 30 and 31).

We cut off the remaining burrs and fibers with a sharp chisel and grind the ends with sandpaper (see photo 32).

From jute twine (with coarse fibers) we cut four pieces of 8-9 meters each (see photo 33) and with the help of an electric drill we twist them into cords about 1.5 m long (fold in half, fasten one end, fasten the other into the chuck of an electric drill, twist it into a double cord. Disconnect both ends and the cord itself will twist into a quadruple.) (see photo 33 and photo 34).

With a hacksaw and a chisel, we cut out grooves for a cord about 1 cm wide from the inside of the connections (see photos 35, 36 and 37) .

And after that we begin to tightly tie the connection with a cord, carefully making sure that the cord passes exactly in the place where the recesses are cut (see photos 38 and 39) .

We tuck the end of the cord into an already wound cord or fix it with a stapler (see photos 40 and 41) .

The result is four beautifully designed corner joints. (see photos 42 and 43).

Now you need to cut out the back wall, which will hold the glass and photograph in place in the recess.

We measure the required length and width of the wall with a ruler - it should cover the recess, plus you need to add 15 mm on each side to attach the back wall to the back of the frame. After that, according to these dimensions, we cut out a rectangle from hardboard or thin plywood (see photos 44, 45 and 46) .

Roulette prices

We mark the locations of the holes for fastening, drill them with a drill with a diameter of 3 mm and countersink with a drill with a diameter of 8 mm under the caps of the self-tapping screws (see photos 47 and 48) .

Using a roller glass cutter, we cut out the glass of the required size - it should be 2-3 mm smaller than the size of the recess cut out for it. In order not to cut yourself in the future, we grind the sharp edges with fine-grained sandpaper fixed in the shoe (see photos 49 and 50) .

We apply a protective and decorative coating on the wooden parts of the frame - wood oil or varnish - and let it stand for about a day until it dries completely. This coating will make the frame brighter and more expressive. (see photos 51 and 52).

After the protective and decorative coating has dried, we insert the glass and the photograph into the recess intended for them. (see photos 53 and 54) .

We fasten the back wall to the frame with small screws. From a piece of twine tied to two small screws, we make fasteners for hanging on the wall (see photos 55 and 56) .

And after that, the finished frame can be hung on the wall.

Many needlewomen are interested in: how to make a photo frame from improvised materials? After all, it is very necessary thing, but magazine frames made of plastic look exactly the same. Therefore, it will be very interesting and useful to learn how to make these things with your own hands, our today's MK for beginners will help you with this.

DIY photo frames from eggshells

These stylish items can be made from any old and unnecessary things. You just need to connect your imagination and not be afraid to create.

The basis for a photo frame is usually made of cardboard. In addition, you can use blanks sold in the store for this purpose.

How to decorate a cardboard base? Only your imagination can limit you here. We offer you to pay attention to the master class of the original product, decorated with eggshells.

1) Cut out the base for a frame 4 cm wide from cardboard. The inner perimeter of the frame must match the size of the photo.

2) We make a stand for a photo frame. We cut out such a figure from cardboard.

3) From the rectangular uncut side, measure a two-centimeter strip and bend it.

4) Cut out a rectangle for the back wall of the frame. Glue the details.

5) Glue the leg. To do this, we spread the bent two-centimeter strip with glue and glue it to the middle of the back wall of the frame.

6) We begin the design. Cover the frame with blue acrylic paint.

7) Boil 5 eggs, peel them in large blocks. Color her in different shades blue paint.

8) When the paint is dry, grind the shell.

9) And now paste over the frame with eggshells in random order, but tightly to each other.

10) Here is what a successful decor turned out.

Instead of eggshells, you can use beaten seashells or other decor.

simple paper frame

It is very easy to make a photo frame out of paper, but always beautiful and embossed, for example, from wallpaper.

You will need:

• wallpaper;
• cardboard;
• glue;
• ruler;
• simple pencil;
• scissors;
• mock knife;
• stapler.

Sequencing:

1) Draw two rectangles on the back of the wallpaper. The perimeter of the inner should be equal to the size of the photo. The width between the inner and outer perimeter should be 3 cm.

2) In the central rectangle, draw diagonal lines and mark 1.5 cm from them.

3) Draw another inner rectangle through these points.

4) Cut the inner rectangle along the diagonal lines with a craft knife.

5) Bend the corners inward.

6) Bend the side of the outer rectangle.

7) Fold the last three-centimeter strip in half.

8) There are small squares in each corner. Cut one fold.

9) Fold the frame into a box.

10) We chop off with a stapler.

11) Cut out a rectangle from cardboard and glue it to the frame. This is the back wall.

Making such a frame is simple, it will be very interesting for children.

Comfort and coziness

Homemade items for the home are a kind of amulet, a symbol of comfort and prosperity. Because the things in which a person has invested his labor and his love have a very strong positive energy.

Handmade gifts are especially valued all over the world. They will surely bring peace and warmth to the homes of your friends, loved ones and relatives. Your young man will certainly be delighted with your joint photo in the original frame. And the children will be delighted when they receive it as a gift. color photo in a bright frame.

Let's look at very simple and quick ways frame making.

DIY photo frames from toilet paper rolls

Make a three-dimensional base and paste over the details as you wish.

Cut the rolls into rings with a diameter of 1.5 - 2 cm, bend with a petal. Glue the petals together good glue, color in suitable color and the frame is ready!

Cut all the same rolls, connect them together, glue them with sequins or rhinestones and the royal frame is ready!

Making frames using the applique method

Literally all the materials that come to your hand can be used here: beads, coins, shells, coffee beans, etc. Details are best glued with a hot glue gun.

In this article, we will talk about how you can make comfortable and beautiful photo frames with your own hands.

Each photo is a unique phenomenon that retains a piece of some emotion. So why not arrange such images in unique frames?

Crafts - beautiful do-it-yourself photo frames from improvised materials: ideas, photos

To get started, we suggest that you familiarize yourself with the ideas of what photo frames you can make:

Photo frame made from burlap roses

Fresh flowers photo frame - short-lived, but beautiful Frames with knitted spirals











Extremely original idea- old clock as a photo frame

DIY cardboard photo frame: master class

To make a cardboard photo frame you will need Stock up on the following:

• corrugated cardboard
• knife
• Pencil
• glue
• Decor paper - absolutely any paper will do
• Buttons, shells, beads

You can start making:

• From a piece of cardboard need cut out the front and back of the frame. Should be like this blanks like in this photo:

• Now is the time to decide how much measure paper for decoration.

IMPORTANT: It must be taken into account that it will have to be folded inward. That is, you can not do without a stock.

• Now the front of the cardboard blank need process with glue, and then glue paper to it for decoration. Until the glue dries completely, you can not proceed to further points.

• But after drying, you can glue the front and back of the photo frame. Only the upper parts do not need to be glued, since a photo will be placed through the top in the future.
• But this is not all, because it is necessary build a support for the frame. For this purpose, you need to cut out such a detail from cardboard, which is indicated in the photo below. You can make it out of paper, then stick it on a cardboard base.

• All that remains is decorate photo frame to taste.

How to make a children's paper frame: templates, diagrams with a description

Such a bright photo frame will surely appeal to children, especially girls. It will definitely decorate the interior of the children's room:

If you like this idea, you should stock up on the following constituents for its implementation:

• Paper - ordinary color, gift or even unnecessary magazines are suitable
• Wooden frame, which can be easily found in a needlework store. Or maybe somewhere in the house an old frame is gathering dust?
• glue

IMPORTANT: A hot glue gun is also useful, especially for beginner needlework.

• Scissors or utility knife
• toothpick

You can start:

• If you want to update the frame cover, you can do it now, painting her.
• From paper you need cut strips.

• Then all stripes are needed fold in half.
• Now every strip needs roll into a roll. This is where a toothpick comes in handy, although you can completely do without using it. ends each roll must be carefully glue.

IMPORTANT: Do not be upset if the blanks turn out to be of different sizes. It is even preferable that each roll is different from the previous one.

• As soon as a sufficient number of bright rolls has accumulated, you can proceed to their commits on the frame. This is where a glue gun comes in handy. You can fasten the parts randomly, but the strength of their pressing to the frame is required!

We bring to your attention one more photo frame manufacturing scheme:

How to make an autumn frame in autumn style - golden autumn: templates, diagrams with descriptions

The easiest way to create a frame in honor of the golden autumn - glue the finished frame with leaves. Leaves are pre-required iron out. Then they are recommended soak for one minute in hot water. However, not boiling! So the leaves can lie better on the cardboard.

After fixing the leaves on the frame, it is worth sending the craft under pressure With. You can then cover the surface with a matte varnish.

If you want something not as familiar as leaves, you can decorate the frame acorns.

Yet a few ideas to create an autumn frame:

How to make a beautiful felt frame: templates, diagrams with descriptions

Felt photo frame-magnet is quite unusual and easy to manufacture.

If you liked the idea need to buy:

• Rigid felt

IMPORTANT: It is desirable that it correspond to a thickness of 2 mm and dimensions of 13x26 cm.

• Tapes approx. 5 mm wide and approx. 3 m long
• Needles - one regular and the other with a wide eye
• Mouline threads - it is preferable that they are one gamut with felt
• Ready-made magnet or magnetic tape
• paper
• Scissors
• ruler
• Toothpick or awl
• colored pencils
• coin

You can get started:

• On the back of the felt required to draw two squares. Each of them must have sides equal 13 cm.

IMPORTANT: Now is the time to take the coin. You should not ignore this stage if you want to get a rounded frame.

• Blanks can cut out.

• Now is the time to get busy a template for making a hole for a photo. AT this example it is presented as a cloud, but in fact it can be any shape.

• Hole need cut out.

• But of course without sheathing of the cut not enough! For this it will be useful overcasting seam in two threads. Fastening takes place on the inside.

• Now the blank-template must be circled on paper. On it, it is worth outlining the outlines of embroidery.

It's time to get busy ribbon embroidery! Cut off green about 50 cm by inserting it in a needle with a wide eye.

IMPORTANT: Try to cut the end of the tape at an angle of 45 degrees.

• End ribbons should fasten on the wrong side felt blank with a needle and thread.

• Next follows in advance pierce the felt in those places where you plan to thread the needle with the tape. The fact is that the hard felt for the needle is too strong, so it is recommended to use an awl or, in extreme cases, a toothpick.

• Now it's worth flashing the frame in the same way and blue ribbons.

• Next you need fold both blanks for felt. They should sew overlock seam using floss threads.

• Left attach magnetic tape to the back of the frame.

How to make a carved wood photo frame: templates, diagrams with descriptions

The right choice of wood for the manufacture of the frame is already half the success. Highly will look attractive products from cherry, walnut, ash, linden. If in the future painting is planned, then best options will become spruce and pine.

IMPORTANT: It must be remembered that the softer the wood, the easier it will be for the master to make patterns on it. This is especially important for beginners.

You need to make a frame as follows:

• From the plate it is necessary cut blanks,the thickness of which will reach approximately 26 mm. Minimum allowances are required.

• Now you need cut the edges, then gluing the workpiece.
• Having drawn pattern template, it is worth attaching it to a tree. The pattern is transferred to the future frame.
• Contours outlining photo hole, need to be cut.
• It is also necessary to cut and patterns.
• Now we need to define rebate dimensions for photo glass.

IMPORTANT: It is worth following the symmetry of the marks.

• It's the turn milling.
• Now happening leveling with straight chisels.
• Can do back of the frame.

We offer following patterns. They are mainly used by craftsmen for making platbands, but they are also perfect for photo frames:

Patterns-1 for a photo frame made of wood

How to make a photo frame from plywood: templates, diagrams with a description

For a similar photo frame needed:

• Plywood minimum 10 mm wide
• Saw for wood plywood
• Electric jigsaw
• Drill - can be either manual or electric

IMPORTANT: The most important thing is that there are drills for wood.

• Scissors, measuring instruments
• Furniture stapler and staples
• Metal bracket or reinforced thread to fix the frame
• Grinding devices - fine-grained sandpaper or special grinders
• Lacquer for woodwork

You can get started:

• The first step is to transfer material templates.

• With a drill need to do multiple holes, and through.
• Now a jigsaw must be placed in the holes. They produce pattern cutting.

• Now the time has come grinding.
• Next, you can proceed to painting object.
• Now you can insert photo. If desired, you can put it under glass. In this case, you will have to fix the back wall, fixing it with a construction stapler or self-tapping screw.

How to make a frame for a photo from a plinth: templates, diagrams with a description

To create such a photo frame needed:

• Pieces of wooden plinth
• Glue type "Moment" or "Adhesive nails"
• Utility knife or construction knife
• Protractor or miter box
• Marker
• Ruler
• Acrylic paints, as well as acrylic putty for woodworking
• Cardboard must be thick

Operating procedure:

• First, it is desirable to cut cardboard base, which will be slightly larger than the desired photo.
• Next, you need to cut out another piece of cardboard - the front of the frame.

IMPORTANT: Each side of the second part must be less than the first by about 5 mm.

• Now both parts must be glued together.
• Then you need to measure 4 pieces of plinth. The stool needs them cut at a 45 degree angle. If there is no miter box, you can draw a corner on paper, then marking it on the plinth with a marker.
• Now you need glue the panels to the cardboard base. If you do not want to make such a basis, you can simply glue the pieces together.

• If there are cracks, they can be easily mask with putty.

• After the putty has dried, you can proceed to painting.

IMPORTANT: If there is no water-based or acrylic paint, you should cover the workpiece with PVA glue before applying any other. And you need to apply several layers.

• It's time to apply water based varnish.

How to make a photo frame from disks: templates, diagrams with descriptions

For a similar craft needed:

• DVDs, CDs
• Black stained glass paint
• Thick texture cardboard
• Pencil, ruler, scissors, tweezers

You can get started:

• From cardboard cut out blank frame

• Now is the time to get busy cutting pieces from disks.

IMPORTANT: These pieces must be irregular in shape.

• Next you need glue the frame, sticking colored pieces on it. It is best to use tweezers. It is advisable to lay out the parts not tightly to each other, because you need to fill the gaps with paint.

• Now paint fills the gaps between the pieces. The edges of the frame can also be covered with black.

How to make a scrapbooking photo frame: templates, diagrams with descriptions

Necessary things to create a frame:

• Special paper for scrapbooking
• Cardboard
• Construction or stationery knife
• Tape, glue, scissors, ruler
• Decor elements, stencils for drawings

Operating procedure:

• on cardboard are celebrated product borders
• Cut off all excess- only the blank frame should remain.
• received The blank should be glued to the back of the scrapbooking paper.

IMPORTANT: The excess edges of the paper must be slightly incised, and then wrapped around the frame.

• All the edges future framework need fasten with tape. The upper part cannot be glued, since the photo will be inserted through it.
• Further from cardboard need cut a piece for the back of the frame.
• Now it is desirable to create support leg for the frame.
• The most interesting stage of work remains - decor! It can be the most varied.

Attached several ideas:

Decorating, decorating and decorating photo frames with your own hands: ideas, decor, photos

You can also beautifully arrange ready-made standard frames. And after decorating, you will get unique and cute things:

Photo frame decorated with colorful spools of thread

Do-it-yourself photo frame collage: ideas, photos A collage of photo frames in the form of a puzzle for children's photos

As you can see, even beginner needleworkers can create an original photo frame. Such a product will give the interior a unique charm and will definitely hold the eyes of guests. And as a gift, such a photo frame will bring a lot of joy.

Master class on creating an unusual carousel photo frame