How to make a spinner with your own hands. DIY spinner: step by step photo instructions. th way: from cardboard

The Rubik's Cube is already in the past. Today's kids are obsessed with pocket sized toys that spin around. Spinners are so captivating for children that some schools have already banned bringing them with them. On the other hand, toys help relieve stress and calm children who have a special temperament.

Spinners are collectible now and they are something of a status. No child wants to show up to school without the most basic play device. If you're on a budget and want it to have a great toy that really stands out from the crowd, there's an easy solution: you can make your own spinner.

There are a few various ways make a spinner, for example, cut it out of cardboard or use old recycled lighters. However, if you try this at home, be aware that the spinner may cause damage to your skin. With that said, there are simple methods. The choice is yours.

How to make a spinner using plastic bottle caps

For this you need: 4 plastic caps, a box of cereal, a knife, super glue, a plastic mug, paint or glitter

Collect four bottle caps. Take four plastic caps from used bottles that are the same size. Glue them together so that all sides meet the middle cap, and then crease the hole in the middle cap of the bottle with a toothpick.

The weight of the adhesive inside the caps. Some prefer to stick pennies on the inside of the caps for extra weight, but household items like magnets will work the same way.

Replace bearings with paper. Place the bottle cap over the plastic cup and cut out the circle. Once the circle is cut out, poke a hole the size of a toothpick and place the plastic circle on the inside of the bottle cap to line up the empty space. Then take a dime draw 10 circles on the box and cut them out.

Make sure all holes line up with each other; this will be an important step towards proper rotation of the spinner.

Glue the circles together. Stick your toothpick in each circle and glue five cardboard circles together, lining up the small holes. Take two more penny circles, and this time avoid punching a hole through them and glue each circle on one side of each five.

Attach all parts together with glue. Take a toothpick and one stack of cardboard circles and glue the toothpick in the middle. Attach a toothpick to the center of a medium bottle cap and snip off the end. Leave some toothpick on the opposite end and glue that end in the middle of another stack of cardboard circles to act as a bearing. Your spinner should now spin like the original.

Decorate your creation. Now that your spinner is almost ready, paint or adding glitter to your toy will complete the job.

How to make a spinner using skateboard bearings

Materials needed: plain bearings, knife, thick rubber band, super glue.

1. Assemble three skateboard bearings. Take the three skateboard bearings you chose and align them together horizontally. Take the middle bearing and pry out the middle tread with a knife to expose the wheel inside.
2. Glue them together. Glue the three bearings together in a straight line with super glue and wait until they dry.
3. Cover with rubber band. Wrap a thick rubber band around the outer edge of the three support bearings for support, and decorate the rubber band if you want to add some character to your new toy.
4. Can do Alternative option spinner, which is more like a traditional spinner. You need to assemble four bearings for a skateboard and follow all the same steps. The middle bearing will have an open wheel and the other three should be glued proportionately around the center.
5. Once your feeder is complete, place your thumb and middle finger in the center of the toy and let go of life's tension.

How to create a paper spinner

What do you need for this:

• Cardboard.
• Scissors.
• Safety pin.
• Toothpick.
• Glue.
• Stickers.

1. Cut the cardboard into four small circles and one propeller shape.
2. Poke holes in the center of each of the circles and propeller with a pin or pointer.
3. Apply a patch of glue to the back of one of the circles and insert a toothpick through the hole. Add a second circle to the toothpick and press down on the pieces of paper to seal the glue and attach the pieces to a toothpick.
4. Add propeller to toothpick.
5. Repeat step 3 with the two remaining circles, leaving about 1/4 inch between the first set of circle and this one (the prop needs room to rotate).
6. Remove the extra ends of the toothpick from the spinner and decorate with stickers.

Teenagers, children and older people have a fashionable twist toy today - especially the ever-tiring and tense "office plankton". The spinner is designed to relieve stress, occupy a person for a while, distract from sad and heavy thoughts, and at the same time train "sleight of hand". Today - at the peak of popularity - a spinner can be bought in almost any store. But you can also make a twister with your own hands from improvised materials and various garbage. It won't take much time and effort.

What is a spinner?

To understand what to start, you need to understand what a spinner is and “what it is eaten with”.

A fashionable toy has many names: spinner, hand spinner, fidget spinner, hand spinner. It is a figure with three blades located radially.

In the center is a metal bearing holding them.

The toy is made of materials such as titanium, copper, brass, stainless steel, plastic. Depending on the material and design of the spinner depends on the speed and duration of its rotation, the vibration of the sound that comes from it.

The spinner was invented in the 90s of the twentieth century, but gained popularity only in 2017. At first, a funny spinner went around all the schools of the world - students performed various tricks with a spinner during breaks. They were even banned from American schools on the grounds that spinning games distracted children from their studies and prevented them from concentrating.

Then the "wonder-twist" crawled into the offices. Some believe that it can help you concentrate or, on the contrary, relax, as, for example, a spinning top or a yo-yo helped before. Representatives of Forbes called the spinner "mandatory office toy 2017".

To "be in trend" - you need to have it. So let's get to work!

Easy ways to make a spinner from improvised materials

Experienced life hackers have long come up with ways to make a spinner from what is at hand. All materials are used, such elementary things as cardboard, plastic caps (from soda), buttons, coins.

Despite the fact that the price of a toy does not exceed a few dollars (the average cost in Moscow is 250 rubles), craftsmen do not stop trying to create something creative “of their own”. Again, "so that I can eat my hands."

Spinner made of plastic caps

This is a simple craft, which, however, will require some effort and diligence.

The work will need:

1. Four covers.
2. Glue stick and gun.
3. Plasticine or kinetic sand (if available at home).
4. Toothpick.
5. Nail or needle.
6. Lighter
7. Scissors.

Sand or plasticine is alternately placed in three bottle caps - to the top. This is done so that the blades are heavy, so the spinner will spin.

The remaining space must be carefully filled with a glue gun.

A hole is made in the remaining lid (using a heated knitting needle or nail) - exactly in the center.

Then three petal covers are laid out around the base with a hole. There should be the same distance between them. How to check? Put another similar cover between them.

All three parts are glued with a glue gun.

Two pieces of 1 cm each are cut off from the glue stick. One is put on the base of the toothpick, it is passed into the center of the toy. The second end also needs to be "secured" with a rod.

The spinner can be beautifully decorated, for example, painted with acrylic paints, they fit well on plastic. Homemade spinner is ready!

step-by-step instruction

Cardboard spinner without bearing

For the manufacture of this toy, again, materials that are difficult to work with or those that cannot be found will not be required.

Necessary:

• cardboard;
• spinner template;
• 3 coins;
• glue;
• rod from the handle;
• awl;
• decoration materials (paints, rhinestones, etc.)

The most difficult thing is to find a ready-made spinner template. This can be done on the Internet, or you can draw it yourself using a marker and the same plastic cover (or a coin, or a button) - just lay them out side by side and circle them.

For work, you will need two pieces of cardboard.

You will also need 4 smaller circles (for example, circle a coin of a smaller denomination).

Coins are attached to one of the templates with glue - each on its own blade. These are weights. They should be slightly smaller than the diameter of each circle.

From above, the coins are coated with glue and a second blank template is glued.

A hole is made in the center of the resulting cardboard spinner. It is necessary to insert the rod from the handle into it and cut it off - 1 cm is enough.

In two circles of smaller diameter, a hole is also made.

The other two remain untouched.

Before proceeding with the final work, the toy must be painted. Ordinary paints - watercolor, gouache - or markers will do.

You can show your imagination and make a bright model out of a turntable, for example, matching the color to your favorite super-heroes.

Can be used for decorating rhinestones, Velcro and other elements. They sit on the glue, but should not interfere with the game with the turntable.

How is a spinner collected? A rod is inserted into one of the small circles. It is necessary to smear its base with glue, insert it into the hole in the toy and press it on top with a second circle.

The remaining two circles are attached outside so that the rod is not visible, and the toy lies comfortably in the hand.

Spinner is ready!

step-by-step instruction

There are many other options for making a spinner at home, but the ones presented here are the simplest. Even a child can cope with such a task.

Conclusion:

Spinner is a trendy anti-stress toy today. To be in trend, you can make a turntable with your own hands. This does not require money - all the materials can be found at home - just a little free time.

Reading time ≈ 6 minutes

More recently, the market of modern youth gadgets was blown up by an anti-stress toy called a spinner. Despite the large assortment of goods offered on store shelves and online resources, the option to create a do-it-yourself spinner looks very attractive, since it will not only save on the product, but also get the desired spinner according to your ideas and imagination. There are many options for making a do-it-yourself spinner at home, consider the most popular of them.

What is a spinner?

The original name of the toy - fidget spinner comes from English word spinner, which means rotation or torsion. It consists of one or several bearings, which, by their rotation, help not only pass the time, but also improve finger motility, dexterity and attentiveness. Spinner analogues can be called the good old yo-yo, which at the beginning of the 2000s could be found in the hands of everyone. Now one of the most popular places among fashion trends spinners are occupied, according to the dexterity of handling which various championships are already held.

What is a spinner for?

The original purpose of the spinner is a toy for young people, a trinket that helps pass the time, but this spinner eventually turned into something more. As practice shows, the spinner is an excellent assistant in the fight against bad habits. This applies to quitting smoking, snapping fingers and many other unpleasant moments associated with the fact that a person needs to urgently occupy his hands with some business. As a result, spinner spinning has become a real hobby for many people who not only master the skill of spinning toys, but also compete in this aspect with each other.

How the toy works

The main task of this product is its rotation, which must be continuous and occur without special efforts. The basis that betrays the rotational movement of the toy is the bearing, which is located in the center. In order for the spinner to spin for a long time and beautifully, it must have the correct shape and reinforcing weight. Typically, three weights are used, evenly spaced from the center, however, spinners can often be found with two or four weights. It is IMPORTANT to note that spinners do not require accumulators and batteries for spinning. If the toy is made in the right way, a light flick of the finger can make it rotate around its central axis. The most important thing in the normal operation of the spinner is the observance of symmetry, because even a slight deviation in the dimensions of the sides with weights will lead to poor and unstable rotation.

How to make a do-it-yourself spinner?

Making this twist is not difficult. technological process requiring special knowledge and tools. The main material is one or more bearings, and there are a lot of options for making the base. The main nuance this process is the weighting of the edges of the spinner, because otherwise it will not rotate well. Coins, nuts or other bearings are perfect for weighting. An IMPORTANT detail for hand spinners is bearing lubrication, which allows you to increase the rotation speed of the toy several times. It is recommended to lubricate with oils intended for motorcycle chains. If this is not at hand, you can use WD-40.

Wooden spinner

In order to decide on the question of how to make a spinner with your own hands, you first need to decide on the base material. Cool spinners are obtained from wooden base, which, with proper and high-quality processing, is not much different from factory counterparts. First you need to create a drawing of the future product. It is based on the diameter of the bearing and three weighting agents, starting from these figures in the future. After transferring the sketch from paper to a wooden blank, you need to cut out the future spinner with a jigsaw.

Holes for metal parts are drilled on a special machine or with a pen drill. For ease of use, the workpiece must be carefully sanded and polished. Reliability of the finished toy will be betrayed by fixing metal parts to the base with epoxy or any other glue. In order to make it convenient to spin the spinner on a finger or any other surface, it is recommended to apply decorative overlays to the rotating part of the bearing. From improvised materials, two ordinary buttons of the appropriate size are perfect for this role.

Spinner with 4 bearings

An attractive manufacturing option is to create a do-it-yourself spinner from bearings. Firstly, this method does not require various foreign materials, except for glue and four bearings, one of which will play the role of the central axis, and the other three - weighting agents. Secondly, this method does not require a lot of time, allowing you to get a spinner in 5 minutes of work.

The only difficulty of the process is the poor adhesion of metal parts to each other. For reliable fixation, additional heat treatment will be required, which is often difficult to provide at home. After gluing, excess glue should be removed with a file or needle file, thereby removing all rough surfaces.

Handmade hot glue spinner

Hot glue is a great base for a homemade spinner. For manufacturing, you will need a set of weighting agents, a bearing, hot glue and a base that acts as a flask (usually made of thick paper or cardboard according to the drawing).

An important point is the installation of metal parts strictly in the center of their area. Then glue is poured into the mold and waits for complete solidification there. After hardening, the paper contour is removed and the spinner is polished to a completely smooth surface.

Epoxy glue toy

To make a homemade spinner, you can use not only hot glue, but also epoxy in the hardened floor. Glue in the form of plasticine not only connects the bearing and weighting agents together, but is also the basis for torque.

In this manufacturing process, it is important to correctly position the metal parts, for this it is better to use a pre-marked wooden board With drilled holes and inserted fasteners. It is better to remove the main excess glue before it hardens completely, then polishing only small roughnesses.

The most simple and a budget option self-manufacturing spinner, this is work with plastic clamps that are designed to tighten cables. For ease of use, it is recommended to use metal weights of the same diameter as the bearing. Weights are laid out at three corners of an equilateral triangle, as shown in the photo. Around them, a base is created from three screeds closed to each other. Then, each of the weighting agents is also attached to the base with a plastic clamp.

After that, an axial bearing is installed in the middle and a uniform tightening of the clamps begins from the side of each weighting agent. For reliable fixation, the resulting structure is pulled together with three more clamps, from the center to each side of the weighting loads. This method manufacturing, although it is the most inexpensive and fastest, however appearance of the finished product is significantly inferior to analogues from other materials.

MDF spinner

Making spinners from medium density fibreboard is very similar in principle to working with a blank of wood. At the beginning of the process, markings are applied on a small MDF sheet, taking into account the placement of metal parts and the overall size of the spinner. Then holes are drilled for the central bearing and weighting elements and a size is adjusted that is close to the final one.

It is worth noting that when processing and drilling an MDF sheet, you need to be more careful and accurate than when working with wood, since this material is fragile and brittle. To give an aesthetic appearance to the finished product, it is recommended to paint it, while before painting the spinner must first be sanded and degreased.

If I didn’t have children, it would be difficult for me to answer the question of what a spinner is.
But our children always know new trends and, like crazy, I pick up new epidemics, immersing us adults in the know. So I had to find out what kind of thing this is and why it is needed at all.

I was interested to know if the older generation knows about spinners and I asked my father if he knows what it is and what thoughts came to his mind.

And this is what he replied:

« I once watched as my dog ​​hit the bicycle pedal with his paw and it rotated with a slight buzz. The game captivated him for ten minutes, then he got tired of it and he lay down and cooled down the kennel to an empty occupation. Now, seeing a spinner, I remember my male and I am very upset when comparing them. Fashion is fashion, but stupidity must have limits«.

Well, I don’t know about stupidity, let’s go, we’ll figure it out in order ...

What is a spinner?

The spinner itself is a spinning toy with blades, inside of which there is a bearing that allows you to spin the blades to high speed. The functionality of such a toy tends to zero, so children arrange speed tournaments, whose spinner will develop a high speed, that one will be “cool”.

Some interesting finds from the AliExpress website. Spinners are so popular now that they are not only made of plastic and metal, but also modified by integrating Bluetooth for synchronization with a smartphone and speakers

The material from which this turntable is made is the most diverse, plastic, brass, stainless steel, copper, and anything else are used.

Variety of forms

The number and shape of spinner blades is also the most diverse, for example, in classic version The "spinner" has 3 blades, but there are also two - and six-bladed versions or simply round, cubic shapes. And for greater effect, LEDs, bluetooth, speakers are inserted into some. What they can't think of!

And handmakers manage to insert blades, knives into the blades, make spinners from everything that comes to hand.

Here is one craftsman who managed to make a spinner from a bicycle chain, and I must say he successfully coped with his goal.

The guys from Novosibirsk, apparently, also get bored from time to time and it’s not knives that are used, but cars.

In practice, this did not show any results, it just began to fall apart in parts, I think it was immediately clear that welding was not such a strong thing for such undertakings. Silly, isn't it?

And some guys - YouTubers took a big risk by replacing the blades with very sharp knives, at first they just spun the spinner, then the idea came to the bad minds to wrap the blades with a material soaked in a combustible mixture and spin this spinner in a burning state, this is already from the fire show area.

This is not worth repeating. This is dangerous! Moreover, protect children from watching such videos.

Is spinner dangerous?

You can argue for a very long time about the danger of these toys, because for some reason people begin to come up with quite extreme tricks with spinners. The speed is mesmerizing, I want to test the spinner for everything it is capable of, and sometimes the issue of safety somehow fades into the background. It turns out that the danger of the toy lies in the heads of its testers. Someone, trying to break glass with a spinner, forgets that a glass fragment can bounce off and hit the face, or the spinner itself at high speed can ricochet from a solid object into the body of the tester.

Is a toy dangerous for the human psyche?

Why did this question come up at all? Have you heard something about the danger of the top? Did you really have to put your psyche to the test as a child, playing with spinning toys? With the same button, for example? I imagine a psychologist sits and says: "Never look at a helicopter, it's dangerous for your psyche" wow ...

For development fine motor skills spinner. If we are talking about a spinner that was just bought for a child, then no motor skills are involved in this, and if the child assembles the toy himself, glues something, cuts it out, then I agree 100%.

I looked at my children, they showed some interest, twisted and put these spinners on the shelf, where they are gathering dust, waiting for the next meeting with the children, but it seems this will not happen soon. I think that the danger to the psyche is very far-fetched.

Does the spinner soothe?

It is difficult to answer this question. But I think the point is that if a person has some kind of nervous tension and is used to biting his nails or breaking pencils, then these stupid habits can be replaced by spinning the spinner, but the very reason for this behavior cannot be affected.

How much does a spinner cost?

The question price starts from 29 rubles, usually knowledgeable people order them on Aliexpress. But like everywhere else, there are madmen who, if there is demand, can make such a chic offer:

How to fix a spinner if it is broken?

What can break?

The spinner itself consists of a housing and a bearing, so it is logical that the plastic housing may be damaged or the bearing clogged with dirt.

If the housing is broken, then superglue will help to glue it, and you can clean the bearing WD-40 or alcohol, after that it is necessary to lubricate it with synthetic oil.

We disassemble the spinner

1. It is necessary to remove the cover and buttons of the bearing. Usually, the cover is fixed on the thread,
therefore, in this case, you just need to carefully fix it on one side, and gently unwind it on the other.

In some models, the lid fastening is made magnetic, such a lid must be opened by carefully separating it. Under the cover, the bearing is protected in the form of a plastic or metal partition, which can be easily removed if you simply pick it up with something thin.

2. If the bearing is fixed inside the housing with a sealant. you shouldn't try to pick it off, as you can unbalance the snipper. In this case, you need to rinse with a non-aggressive agent, so as not to damage the case, isopropyl alcohol is best.

We clean the bearing

1. Pour the cleaner on the balls and scroll them so that the liquid cleans the balls from all sides.

2. We wash the bearing, dry it with a hairdryer (a towel or napkins for drying will not work, as small fibers and dust will get inside). We lubricate the bearing with synthetic oil, one drop is enough for these purposes.

How to make a do-it-yourself spinner?

To make a spinner yourself, you need to consider what material you would like to create it from. The simplest spinner can be made from improvised materials, something that can be found in any home without much difficulty.
In any case, first you need to make a drawing of the future toy. In this case, you need to show imagination and some drawing skills. But you can make it easier: circle already finished drawing downloaded from these pictures:

Spinner without glue and bearings

The simplest spinner model, the one in which the bearing is replaced with an axis around which a simple spinner rotates, in this design you don’t even need glue. Simply, either assemble or cut out the turntable body itself, making a hole in the middle for the rod (axis). Thread the rod and the toy is ready.

paper spinner

For a paper spinner, we need two colored squares of paper, 15 by 15 cm in size. Let's prepare a toothpick as the axis of the spinner and a pair of clip caps from the stem of an ordinary writing pen.

According to the scheme, we make the body of the turntable, then we pierce a hole in it with scissors, slightly expand this hole so that the axis freely enters it.

Spinner without bearing and hot glue made of cardboard

We suggest you make another spinner option out of cardboard. Below is a step by step guide with photos.

We make a template for a turntable from cardboard, for this we circle any cover desired diameter, then inside this circle we draw an isosceles triangle and draw circles at each corner, thus we get a three-bladed blank of our spinner.

Then we bring the shape of the spinner to the desired one and decorate our spinner as our imagination tells us.

Another type of cardboard spinner is on a rope with or without a button.

We make a cardboard blank in the form of a circle, paint it as fantasy tells us, then we attach a button with two holes and pierce our blank in the right places with scissors, after the leads are ready, glue the buttons with glue, then we thread the rope into one hole and pull it out of the other, we tie our rope. If you don't have the right buttons, you can just make two holes and thread through them.

How to make a do-it-yourself spinner from plastic bottle caps.

For this spinner design, we need bottle caps, depending on the number of blades from 4 to 7, four 6000RS bearings, a drill, a knife, sandpaper and a glue gun.

Making a hole required size for the central bearing in the cork, glue the corks together, insert the bearings into the caps, fixing them on the sides inside the corks.

The design of your brainchild depends on your imagination.

If you have something to add, write in the comments, we will discuss.

History of the spinner

Open any site where there is information about the spinner, you will read that supposedly the toy itself came to us from America (whatever the virus, it is American).

It is not known for certain who the inventor of this toy is, e according to wikipedia, then the inventor of the spinner, Katherine Hettinger, who came up with the prototype of this spinner for her daughter.

In her interviews, the woman each time came up with new versions of what influenced the implementation of the spinner idea.

Scott Mac Coskery, according to the same Wikipedia, came up with a rotating metal device, which, according to him, helped him cope with the excitement before responsible speeches or meetings.

I'll tell you more, the prototype of this toy is over 5000 years old. Its predecessors were found in the territory from China to Venezuela and Israel, and why go far, do you remember your childhood? I am speaking to those people whom children consider to be dinosaurs, who rewound cassettes for a tape recorder with pencils. In our childhood, there was also a spinner, but it didn’t have this name, remember?

Well, if I tell you a word - a button?

Well, yes, we remembered, here it is our favorite ... and we twirled it and stuck all sorts of things to the button to see how it would twirl, our children simply go through the same stages, but with toys that have passed evolution, in parallel with our brain. Yes, it looks like this is the toy that has been played with for 5,000 years and will be played with for a very long time to come.

Another interesting fact there is about the same spinner, and we will talk about the biophysicist Manu Prakash. He visited a hospital in Ugada, noticing how the centrifuge from the laboratory, designed to separate blood fractions, simply propped up the door with itself, because there was no money for banal electricity.

Manu did not think for a long time, he tested a paper spinner, although his name is completely different, but the essence is the same.

On the basis of paper discs and ropes, the Manu team created a paper fug that developed a speed of 125 thousand revolutions per minute, despite the fact that centrifuges in the laboratory reach speeds of up to 16 thousand revolutions per minute and at the same time are not cheap, but when compared with the price of paper machine, the price is simply sky-high.

Making such a paper blower is not at all difficult, says the Manu team, which has submitted an application to the Guinness Book of Records to place their super invention.
If the Internet had been so developed in my childhood, there would always be those who wanted to talk about the dangers and benefits of the top, plastic dolls, or some other mass enthusiasm.

The essence of the dispute is whether a spinner is harmful or not, it’s not worth a damn, there’s just a hype around the novelty and everyone is trying to make a PR campaign on this: psychotherapists who have a lot of time and effort with the version of personality imbalance, bloggers who are ready to chop off themselves for the sake of likes fingers, destroy cars or set fire to your house, but first things first.

One conclusion can be drawn: if children did not have toys, the world would stop in its development.

Do you have such a toy at home? Write your opinion below...

Spinner, spinner .. Everyone seemed to have gone crazy. What it is? Where did it come from? And most importantly for what? Today we will try to figure it out ... It was invented by one person. Now the whole world is going crazy, people are buying, kids are loving it.

When I was little, I really liked to spin the top. You take out some bigger gear from an old watch and start turning it - who has longer? Familiar? You sit and watch .... Remember your feelings in childhood.

Approximately the same sensations arise when I rotate the spinner. Spin and look. Yes, and a spinner is essentially a spinning top. Only the top is on the axis. A spinner is twisted in a horizontal plane. The Anglo-Saxons like to use the word "spin" (rotate, turn).

They have "spin" everywhere - from quantum mechanics and physics - to this simple thing. Terribly simple. And we have a top, and many other analogies ..

Who rewound the cassette with a pencil, that spinner does not buy!

Time does not stand still. Our children no longer know about all sorts of tape cassettes and spinning tops. Here's a newfangled thing. And there is every reason to think that the spinner will soon turn into an element of style. Maybe soon we will see spinners not only with LEDs, but also gold, with rhinestones, maybe even with diamonds ..

It's such an interesting time right now, you can expect anything. If there is a demand for platinum spinners, I will not be surprised. Online stores are already selling products for 3,000 rubles with might and main ...

Spinner - what is it, what is it for and why is it needed?

Structurally, the spinner is very simple. Imagine a star with a bearing in the center. Star petals are balanced. In each beam, you can also insert a bearing. And twist yourself. Add brightness with bright colors and now, the spinner is ready.

It is necessary, of course, for entertainment and during idleness. If you are in the "trend", then of course, in order to remain fashionable and stylish. Initially, it was conceived as an anti-stress sedative. Which is true. It can be twisted in different ways - on the table, in the fingers, on one finger ... While it is spinning, you watch how it does it, and at that moment your head becomes completely empty ... And this is rest, friends. Let for a minute, but rest.

All your attention is switched to the spinning petals. Maybe for this reason, in our age of stress, this simple children's toy has become so popular all over the planet ... Who knows? Children are very fond of spinners for their brightness and for this very thing ... Now many sellers are serving this attractive product as a kind of "remedy". Here's what the sellers say:

• develops motor skills and increases the sensitivity of the fingers. Particularly useful are products for restoring the working capacity of the hands after various injuries and fractures of the hand;
• the device has an anti-stress effect: it helps to concentrate, eliminates anxiety, relieves nervous emotional condition and irritability;
• the toy will be a great way to take time when traveling in transport or while waiting in a long line;
• stimulates the development of manual precision.

So, if you want to relax and get an expensive exclusive product, then go to online store. I am sure that we are very eagerly awaited there. But Russia is such a unique country. Our man cannot sometimes reconcile himself to go out and buy this simple thing. Our man does it himself.

Because when you have made a Thing yourself (even the simplest one), there is a completely different attitude towards it. It’s always a pity to throw away such a thing, for example ... By the way, when you make something yourself, it also sometimes relaxes and distracts. We will make a spinner with our own hands to be distracted and experiment 🙂

How to make a do-it-yourself spinner from improvised materials?

Materials friends, can be very different. But the principle is the same - in the center is a bearing. In order to ensure long and easy rotation, the toy must be balanced, and the bearing must not contain thick grease. Here is one of the production options:

You need to buy four bearings (three will be as counterweights)

You will need a drill for wood, (perk) with the same diameter as the bearings:

Still - we need the material itself, from which the case is made. He can be anything. The main requirement is strength, and easy processing.

We mark the material with a pencil like this:

We continue to rotate the drill (the same spinner):

Let's make additional holes with a regular drill (for an intricate design):

The workpiece should be drilled like this:

And before fitting the bearings into it, look something like this (if you can work beautifully, you should try to somehow round the corners):

It is necessary to prepare the central bearing, remove the factory grease from it.

After removing the protective covers from the clip, rinse it in gasoline or acetone:

Then you need to use a suitable glue (superglue does not glue all plastic!) Epoxy or another, carefully glue the bearings into place.

Something like this:

Here is such a brutal, "masculine", harsh, spinner turned out.

Watch the video of the production from start to finish:

As you can see, everyone is experimenting as best they can :) :). There is no limit to perfection! There would be a desire. Both samples spin well. More effort will go into good design. Hooray!

How to fix a spinner if it is broken, rusted?

According to my feelings, the purchased spinner cannot be broken. The bearing is pressed into a metal housing; counterweights are glued or pressed. The weakest link is the bearing. It can rust if children drop it and rinse it in water.

It is clear that if the spinner is homemade, as in the example, we simply lubricate and develop the bearing until all the rust comes off. We re-glue the bearings that have flown out with normal glue. In severe cases, we use a rust converter and lubricate until the previous “driving” qualities return. In the case of a purchased spinner, carefully remove the cap or cap, which are always present there:

We apply liquid household lubricant for locks to the clip and so on. If there is a lot of rust, you can throw it into a jar of oil, let it lie down .. That's the whole repair.

Paper origami spinner - without bearings and glue, how to make?

In the wake of the general enthusiasm for the toy, experiments continue. Someone again connected two different directions and they began to make spinners out of paper. By the way, just such crafts develop motor skills and everything else in children.

Therefore, you can captivate your child just by making such original things. From paper, it will be safe for the child. True, a little disposable. Color paper:

Action one:

Action two:

Action three:

Action four, axis:

Action five, the same “bearing” made of paper, which confirms that the Japanese are creative people 🙂

To understand what's what, watch the video.

Handsomely. And it's fun to do those things.

How to make a do-it-yourself spinner from plastic bottle caps

Our people are talented and resourceful. All in the economy! We don't throw anything away! We choose brighter and newer!

Everything is simple, the principle is the same, the material is different.

We do it once:

We do two. It is necessary to drill and clean a hole at the bottom of the cover, and glue:

We glue only three corks, the rest are used to align and symmetrically the first three. It should turn out something like this:

It is necessary to bring everything into a divine form and then begin assembling the product. We also rinse the bearings in acetone and then assemble them.

When everything is inserted, glued, check:

It works.. 🙂 But, friends, this is the easiest way. There are quite exotic but interesting ways to make spinners from plastic corks. Watch the video.

As they say, there would be a desire. It remains to be said that in any creative process there is no limit to perfection. Make a spinner out of wood, metal, cardboard, concrete..

As long as ball bearings are produced, we can do anything. Any creative work gives pleasure to those who do it. Do it with pleasure, and then everything will turn out well for you. See you on the blog pages. If anyone has links to interesting options homemade spinner, please leave in the comments.