Catalog of modern projects of houses made of aerated concrete and foam blocks
This section presents projects of houses, cottages, baths, garages in the construction technology of the two most popular types of cellular concrete: aerated concrete and foam concrete. It is important to know that although these two building materials belong to the same class of concrete, they are two completely different products in terms of structure, production method and masonry technology.
Modern house made of aerated concrete PA-1644G
Total area: 164.48 sq.m. + 25.34 sq.m.
Construction technology: aerated concrete cottage.
Project cost: 32,000 rubles. (AR + KR)
The cost of materials for construction: 1,987,000 rubles *
A house that combines the motifs of an old European rural cottage and cutting-edge facade solutions, layouts and technologies. Floor-to-ceiling windows, a brick-lined facade, large stained-glass bay windows - these are the characteristics that immediately attract attention and distinguish this house from the general range of standard buildings. No less magnificent are the interior layouts of this small house in the development spot. Open terrace, further hallway and cloakroom. From the hallway you can immediately go into a huge living room or turn into the kitchen. The living room is visually separated by an arch from the dining room. The dining room is separated from the kitchen, thus the smells and noises from the kitchen do not penetrate either the dining room or the living room. To the left of the living room is a large bedroom and a boiler room. The boiler room, in full compliance with the norms and rules for the operation of gas boilers, has a separate entrance from the street and a room volume of more than 15 cubic meters. Separately, I would like to say about the living room, which structurally has a second light, and it also provides a place for a fireplace. On the attic floor there are two large bedrooms and an office. The bedrooms are made in a block design, that is, for each of them there are separate bathrooms. Residents can use partitions to divide these rooms into a bathroom and a wardrobe. The finished project of a house made of aerated concrete PA-1644G is an excellent example of modern architectural design of country houses.
Detailed description of the project PA-1644G ➦
The project of a two-story house made of aerated concrete PA 154-0
Total area: 154.06 sq.m. + 25.99 sq.m.
Construction technology: aerated concrete blocks.
Project cost: 28,000 rubles. (AR + KR)
The cost of materials for construction: 1,816,000 rubles *
The most popular project of a two-story house of the most popular series of aerated concrete houses. There are eleven more options for this house in our catalog of finished projects. All of them have certain parameters and characteristics that unite them into a separate series. Firstly, it is simplicity in constructive solutions, which allows them to be positioned as economy-class houses. This is an ordinary square in a building spot, with a simple four-pitched roof and rational layouts of the interior spaces of the first and second floors. Secondly, the total area of these houses is in the range of 200-250 sq.m. Thirdly, all these houses are designed in the technology of building from aerated concrete blocks. What, first of all, is this project interesting. On the right, to the main building of the house, there is a covered terrace, which has an exit from the kitchen. Also on the ground floor there is a living room with a fireplace, a separate guest room, a vestibule, a large entrance hall, a dressing room, a bathroom and a boiler room. A comfortable porch is covered with a canopy from rain. On the second floor there is a large hall, three bedrooms, a pantry, a separate bathroom and a bathroom. The walls of the house are lined with aerated concrete blocks 400 mm thick and external insulation is recommended. Fine finishing of the facade is made of decorative plaster and artificial stone.
Detailed description of the project PA 154-0 ➦