How to make a small vacuum cleaner from a small motor. Do-it-yourself construction vacuum cleaner, how to make it at minimal cost? What can be done with a Typhoon vacuum cleaner

At the moment, the market is flooded not only with universal ones, but also with special industrial ones. But if you want to save money on buying them, you can try to do it yourself.

Such devices are quite expensive, but they are necessary during repair work to quickly clean up your workspace. With the help of an ordinary vacuum cleaner, it will not be possible to achieve a high quality of cleaning, since they are not designed for such debris.

Household models are not able to qualitatively and quickly clean surfaces from oil, chips, plastic fragments, glass, etc.

Before you make such a vacuum cleaner, you need to decide with work front, as some models are designed for cleaning liquids or even small gravel. After the principle of operation is determined, all other parameters should be considered.

There are many real examples self-creation industrial vacuum cleaners. Consider the manufacturing option from the old Rocket model.

What is required for work?

If the old Rocket vacuum cleaner is lying around at home, it will be great consumable to create a construction site (more on what else can be built - in the article).

In addition, you will need the following tools and materials:

• Bulgarian;
• screwdriver;
• bandage;
• branch pipe 200 mm long and 40 mm in diameter;
• metal scissors;
• plastic bucket with lid and handle;
• glue;
• insulating tape;
• drill.
• scotch;
• self-tapping screws.

Let's start creating a construction vacuum cleaner

Initially, you need to do garbage collector which needs improvement. Armed with a screwdriver, unscrew the wheels from the base of the vacuum cleaner and tightly glue all the holes obtained with tape. After the nameplate is removed, its hole must also be sealed with tape.

All fasteners are removed. Now, with the help of a grinder, it is necessary to free the body from all rivets and put a plug, previously wrapped with insulating tape. Next, make a hole in the bottom with a drill, 43-45 mm in size. A gasket is taken as a gasket, approximately 3-5 mm in thickness.

In the bin that has been converted, you need to fold the gasket, centering pipe and bucket lid. Take a 2 mm drill and use a drill to make holes that will later hold the lid.

Next, holes are made already outside the suction pipe. Before doing this, you need to put marks at an angle of 15 degrees. Using scissors for metal, we make a hole. After that, we attach the pipe with self-tapping screws. For maximum tightness, it is necessary to carefully soak the bandage with glue and wrap it around the nozzle.

The nuances of such a device

In order to assemble your construction vacuum cleaner, you must have on hand power unit, whose revolutions must be at least 6,000. As for the material at hand, it can almost always be found at home. As a donor for the engine, you can use not only an old vacuum cleaner, but also a washing machine.

Some craftsmen use power units from kitchen machines for a homemade vacuum cleaner, but do not forget about their tendency to frequent breakdowns due to their inability to withstand high loads.

If the power unit is found, then you need to take care of it tightness. You will also need a fan. Very often, an ordinary bucket is taken as a housing for a vacuum cleaner, in which a hole is made. Naturally, both a garbage container and a filter are needed, which can be.

The presented videos show several variations of the assembly of a construction vacuum cleaner. It is recommended to study them if you decide to create a homemade model.

Hello dear friends, today I will show you a wonderful idea on how to make a mini keyboard cleaner. With such a vacuum cleaner, you can easily clean the keyboard and various circuits. Also, this vacuum cleaner is portable and can be used to remove dust anywhere.

Necessary materials:
- soap bubble container
- motor
- bottle neck
- neck from detergent
- crown
- switch
- connector
- thin metal
- a pen

Step 1: First we need to make a propeller. Cut out a circle from the can (the diameter should match the inner diameter of the container). Then we drill five holes: one in the center, and four on the sides, as shown in the photo. Then we make cuts, and bend the blades to make a propeller.

Step 2: Then we take the neck of the bottle and attach the motor to it with glue. Then we fix the propeller on the resulting structure. And we fix it all in a container.

Step 3: Then, on the back of the container, we make small holes. Next, take the neck from the detergent and glue it, as shown in the photo. Glue a small piece from the handle to the neck.

Cut out a small piece of breathable fabric, and insert it as shown in the photo.

That's all! Our mini vacuum cleaner for cleaning the keyboard is ready, insert the crown, and use it.

Making a homemade vacuum cleaner with your own hands is very easy. Such a device is useful in various everyday situations.

Do you need a vacuum cleaner urgently? Was it broken or out of reach? But did you know that you can make it yourself? To do this, it is enough to have the most common items that are present in any apartment: empty bottles, wires, scraps of tubes, hoses, broken toys that you were sorry to throw away. First of all, you need to get somewhere a small working electric motor. This is the foundation of the basics. It can be borrowed from a broken children's toy or some unnecessary electrical appliance. Having obtained it, you can start making a small vacuum cleaner.

1. Take a plastic lemonade bottle and cut off the neck where it expands. From the cut of the neck, measure the excess part and cut it off so that the remaining space is enough for the dust collector and motor.
2. Fan. You can borrow an old fan from system block computer. If not, then find a piece of soft metal right size. It can be from under a can of beer. The main thing is that it can be easily cut with scissors and then bent. The diameter of the fan wings must match the inner diameter of the bottle. Cut out a circle, mark it into 6-8 equal parts. Cut the marking lines, leaving 5-10 mm to the center of the circle.
3. In the center, make a hole for the motor rotor, and bend the fan blades at an angle so that they suck in air during rotation, and not vice versa. Fasten the fan and motor rotor with glue, trying not to skew the connection.
4. Poke holes in the bottom of the bottle to allow air to escape. Attach the motor to the bottom of the bottle. For this, a plastic cover is useful. Glue it to the motor, after passing the wires from it into the hole on the side.
5. Place the fan inside the bottle and glue it to the bottom. Glue the seal to the top of the bottle on the inside.
6. Make a ring out of any wire. Place the ring on top of the seal and glue a circle of thin fabric onto it. Close the design with the top of the bottle. Then glue a small hose to it. The nozzle can be made from half an unnecessary plastic vial.

As you can see, making a homemade vacuum cleaner with your own hands is quite easy. Such a device is useful in various everyday situations. The power of a small vacuum cleaner, for example, is quite enough to clean the keyboard from dust and bread crumbs. The made device can be easily transferred from place to place, not only in the house. It can be used to clean seats and panels in the car interior.

There are different situations in life. If you suddenly need to use a mini-vacuum cleaner, you can save on the purchase and make it yourself.

1. Outline the label along the top and bottom lines. Cut out the part of the bottle where the marking label was.

2. Take an old empty can or tin can, remove the bottom and top, then cut in the middle to make a rectangular sheet.

3. Measure and cut a circle from the tin sheet to fit the diameter of the bottle.

4. Leaving in the middle a place for a small motor, draw a tin circle and make cuts to make 8 sectors. Each of them needs to be slightly bent. Make a small hole in the center.

5. Now attach the motor to the resulting makeshift fan.

6. Using a drill and a large drill, make 3 rows of holes at the bottom of the bottle.

7. Glue the cap from another bottle to the motor, after passing the wires from the motor into the hole on the side.

8. Put the fan inside the bottle and glue it to the bottom. Glue the seal to the top of the bottle on the inside.

9. From the wire, make a ring with such a diameter that it fits in the bottle and can be placed tightly on top of the seal. Glue a circle of thin fabric onto the ring.

10. Put the ring in the bottle on the seal and close the structure tightly with the top of the bottle.

In today's video, I'll show you another idea for mini fakes of homemade products, namely how to make a mini USB vacuum cleaner with your own hands at home! DIY mini USB vacuum cleaner is very easy to make, but it takes a lot of time! Using the simplest homemade mini USB vacuum cleaner, you can remove some debris from the keyboard (crumbs, dust, etc.) Also, a mini USB vacuum cleaner can help you out on your desktop after cleaning a drawing or drawing from the remaining crumbs after wiping with an eraser! All parts of a miniature USB vacuum cleaner made by hand can be assembled independently, at home, practically from improvised means! The design of a homemade mini USB vacuum cleaner made by hand is practically no different from a real vacuum cleaner, since air is also sucked in with the help of a turbine! Not fluff and feathers in creativity and pleasant viewing! ******************************************************* ********** I welcome you to my channel Roman Ursu, where you will learn how to make homemade, New Year's crafts, gifts, toys, scarecrows for Halloween, and most importantly, that all this can be done at home and with your own hands! Are you into handicrafts, crafts or do you just have nothing to do? Then you got to the channel you need here you can find a lot of homemade crafts, crafts that are made by yourself, and most importantly, they are all made from improvised means and at minimal cost! ******************************************************* ********** main channel: http://www.youtube.com/user/romanursu my second channel: https://www.youtube.com/user/romanursuvlogs Vkontakte community: http://vk.com/club59870517 group in classmates: http://www.odnoklassniki.ru/romanursu Attention! be careful and do not repeat this at home, the author is not responsible for your actions, this is an entertainment video, not a training or a call to action! ATTENTION!!! - my channel for decent ones: for mate, shortened or modified mate, for insults and "trolling" - I WILL BAN!!! ******************************************************* ********** In today "s video I" m going to show you the next idea of ​​crafts and home made things, actually how to make a mini USB vacuum cleaner with your own hands at home! It is very easy to make a mini USB vacuum cleaner with your own hands, but it takes a bit more time to construct it! With the help of the simplest hand made USB vacuum cleaner you"ll be able to remove some rubbish from your key board (crumblings, dust etc.) The mini USB vacuum cleaner can help you after you have painted or drawn the sketch for removing the eraser bits. All parts of the miniature hand made USB vacuum cleaner you may construct from the make-shifts at home! welcome to my channel Roman Ursu where you will learn how to make hand made crafts, New Year crafts, presents, toys, Halloween scares. make it at home and with one's own hands. You are interested in handiwork, craft or you just have nothing to do, haven"t you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!