Sawing of sheets of a chipboard under the order. Sawing and cutting chipboard. Saw chipboard according to the customer's size wholesale and retail
When ordering a cut from 10 sheets, we give a discount of 3% on the material
Sawing and cutting chipboard and chipboard
Chipboards - conventional and laminated - are widely used in construction and interior decoration, in the manufacture of furniture and other products. Parts and blanks made of chipboard and chipboard are in demand not only in mass production, they are quite often used for self-manufacturing furniture and interior elements. This saves money and allows you to make products to your taste.
Before proceeding with the manufacture of furniture, it is required to cut the material. With a small amount of work, this does not take much time and effort and can be done at home. But to cut a large number of plates will have to work hard. In addition, independent sawing of chipboard can spoil the material - a violation of chipboard cutting technology and the use of non-professional tools leads to chips, cracks and scuffs of the laminated coating.
The best option is to order chipboard cutting in a specialized company equipped with professional equipment. In this case, you will get parts of precisely defined shapes and sizes with clear and even edges.
Sawing chipboard at All-fanera
All-fanera is ready to perform chipboard sawing work using our own boards or customer materials. Our range of services includes:
- according to the size of the customer;
- hole insertion;
- PVC edging;
- production of blanks with internal and external bending with a radius of up to 60 centimeters;
- execution of beveled parts;
- cutting and cutting plates at an angle in thickness from 0 to 45 °.
Thanks to the use of modern machines, we can produce:
- blanks for cabinet furniture;
- details for the kitchen interior;
- blanks for other furnishings.
Our equipment allows us to produce products with flawlessly smooth and clear edges. In our work, we use only high-quality and sharp saws, thanks to which the edge of finished products does not crumble, and burrs do not appear on the laminated layer.
When processing board materials, it is important to observe the exact dimensions of the parts specified by the customer. To do this, the sheets are cut according to pre-prepared computer templates. This approach allows:
- correctly arrange the details on a sheet of chipboard;
- get blanks with the most accurate dimensions and angles;
- minimize material waste;
- reduce the time of work.
Advantages of All-fanera
Since 1994, All-fanera has been cutting chipboard in Moscow. During this time, our specialists have gained extensive experience in sawmilling, which allows us to cope with orders of the highest complexity. Our clients receive:
- profitable
- work with the use of computer maps and secondary control of technical specifications;
- high-quality processing of materials - finished parts have a smooth, non-crumbling edge without chips and scuffs;
- packaging of finished products (optional);
- prompt shipment of parts and blanks.
How to order cutting of laminated chipboard in Moscow at All-fanera
To place an order, you must fill out the form, indicating the thickness and color of the material. For more information, call +7 (495) 626–95–51, +7 (495) 626–99–95, +7 (903) 589–02–89 or contact the order office located at: Moscow, Leningradskoe shosse, 63 (metro station Rechnoy vokzal or metro station Belomorskaya).
For many years we have been engaged in the production and manufacture of cabinet furniture, and over the years of cooperation with various customers we have gained excellent experience. Contacting us is a guarantee quality work in the shortest possible time!
Edging laminated chipboard
We carry out edging of parts made of chipboard and laminated chipboard with both a thin PVC edge - 0.4 mm, and a PVC edge of 2 mm.
Edgebanding cost:
- PVC edges 0.4 mm thick — 40 rub / l.m
- PVC edges 2 mm thick — 80 rub / l.m
We carry out edging of radius and curvilinear parts. For availability and cost, check with the managers of the company. You have the opportunity to send a request by mail on the site and our manager will contact you as soon as possible.
Edging is milestone during the furniture making process. It involves applying a furniture edge to the end of parts made of chipboard / chipboard. It allows you to protect the item from various mechanical damage, increasing the life of the furniture. In addition, furniture with an edge looks neater and fits better into the interior. A high-quality glued edge also ensures the moisture resistance of the part, but for this it needs to be applied by professionals using special equipment.
To get detailed advice on these and our other services, just call or write and the consultants will answer any question.
We offer a full range of services for sawing laminated chipboard according to the size of the customer in Moscow. Professional cutting of laminated chipboard is a guarantee of quality in the manufacture of cabinet furniture. LLC "Rich Wood" will become your reliable contractor for the manufacture of any parts required dimensions and forms.
- Straight
- Curvilinear
- Difficult
- Bevels
- Radii inside and outside
- Saw groove and quarter
Our suppliers:
- Egger
- Russian laminate
- Kronospan
- Kastamonu
- rehau
Here you can use the service of a professional furniture designer. You can also order sawn chipboard from us without extra charge for the material!
The cost of sawing chipboard:
Cooperating with us, you pay money only for the work! If you wish, you can make an order from your materials, paying only the cost of the service.
Chipboard sheet format 2440x1830 2500x1830 2750x1830 2800x2070 |
||||
Name |
Up to 200 m 2 (rub.) |
200-400 m 2 (rub.) |
Over 400 m 2 (rub.) |
|
Chipboard, MDF (8-18 mm) / m 2 |
||||
Chipboard, MDF (22-32 mm) / m 2 |
||||
Tambourat (40-60 mm) / m 2 |
||||
complex detail (bevels) /pc. |
||||
complex part (outer radius) /pc. |
||||
complex part (inner radius) /pc. |
||||
complex detail (outer + inner radius) /pc. |
||||
Chipboard (a quarter under DVPO) / r.m. |
||||
Chipboard (propyl at 45°) / rm. |
Our equipment park consists of professional machines for furniture production CNC cutting center GRIGGIO LINEA GS 32 and panel saw "Martin"
Dear customers, in order to avoid errors with dimensions, please kindly send drawings of parts, as well as products in isometry or other programs (Bazis-furniture maker), in net overall dimensions without any allowances!
Our company is yours reliable assistant in the manufacture of quality furniture for the home and for sale. Save with us and enjoy the cooperation. We are waiting for you!
So, I collected a sufficient amount of material and decided to dash off another analytical note. This time the theme is sawing chipboard without chips.
There is a fairly fair opinion that it is possible to cleanly cut chipboard only on professional equipment (that is, a panel saw).
The whole highlight of this machine is that it has two saw blades located strictly on the same axis. The first cuts the chipboard, the second cuts it through.
The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there are more expensive))). NOT VERY ACCEPTABLE FOR THE AMATEUR.
Not a bad way to trim incorrectly marked parts, but you can’t cut the whole cabinet in this way. Chips, of course, are present, but in an amount that is quite comparable with the formatter (it also, in secret, leaves a small number of small chips). A lot of hassle with markup. Only straight cuts can be made.
Method 5 - Fraser
Provides the cleanest edge of the workpiece; the quality is no different from the formatter, often even better.
With it, we first saw the workpiece with a jigsaw, departing from the marking line 2-3 mm, and then we align the line according to the template (I usually use the second piece of chipboard, sawn on a formatter, right size). should be copy, that is, with a bearing.
Very clean cut. The possibility of carrying out curvilinear cuts, that is, the manufacture of many, including several completely identical ones. Cons - a lot of trouble: the need for accurate marking, preliminary sawing of blanks, setting a template or tire under the router, that is, not very suitable for mass use.
We cut laminated chipboard into parts according to the size of the customer. In stock big choice decors of laminated chipboard EGGER and Kronospan.
Attention!
Egger has announced the withdrawal of a large part of the chipboard decors in 2020! Order any decors now, don't delay for tomorrow!
The price of the chipboard Egger part with cut-to-size
Chipboard Egger 8 mm | from 740 rubles / sq. m |
Chipboard Egger 10 mm | from 740 rubles / sq. m |
Chipboard Egger 16 mm | from 740 rubles / sq. m |
Chipboard Egger 25 mm | from 1050 rub. / sq. m |
Colors and prices laminated chipboard EGGER |
Price details chipboard Kronospan cut to size
Radius cut
Nesting is not only a radius cut of curved parts on milling machine with CNC, but also the manufacture of parts from chipboard and MDF with holes for assembly in one go, i.e. without moving from machine to machine.
The main advantages of manufacturing curved parts and parts with an additive using the NESTING technology:
- The possibility of saving laminated chipboard sheets due to a denser arrangement of curved parts on the laminated chipboard sheet
- High productivity - cutting speed up to 20 meters per minute.
- Fundamentally higher manufacturing accuracy compared to traditional technologies.
- Possibility of manufacturing internal cutouts with high quality.
- Fine cut both on the front and on the back side of the part, which improves the quality of the edge application.
- The ability to work with vector files created in Basis Furniture Maker, Corel Draw and their analogues.
The above advantages allow you to save both on material and on the cost of work on curved sawing and additives, which is fully noticeable on large orders.
The cost of services for cutting on a CNC milling machine for laminated chipboard and MDF with a thickness of 8-19 mm is 30 rubles per 1 m.p.
Radius sawing of a part from chipboard
Chipboard edge processing
Application of 0.45 mm PVC edges to laminated chipboard parts
Application of 2 mm PVC edges on chipboard parts
Hardboard (hardboard)
Sawing hardboard and holes for fiberboard
MDF
Cutting MDF Kronostar to size
Furniture additive
Drilling holes in chipboard for fittings
Hole for furniture hinges, Ø35 mm | 55 rub. / PCS. |
Hole for shelf holders, Ø5 mm | 25 rub. / PCS. |
Through hole for confirmation, Ø8 mm | 25 rub. / PCS. |
End hole for confirmation, Ø5 mm | 25 rub. / PCS. |
You can get the details faster by issuing and paying urgent cut. DSP Komplekt reserves the right to refuse to provide services without giving reasons. Payment for servicesYou can pay for cutting services:
|