brick houses / 03.04.2020

How to insert glass into interior doors of various models. Types of glass and options for replacing, tips on how to disassemble and install in an interior door Replacement of glass doors

Interior doors with glass pleasing to the eye. Thanks to them, the apartment is always filled with natural light. However, careless handling of such a door can lead to the fact that their fragile part may crack or break. The question arises: what to do? Of course, it is better to use the services of a professional craftsman who will qualitatively replace the glass sheet. However, if you think that you can cope with such a task on your own, then try it after reading the article.

Glass replacement in interior doors

Modern interior doors can have original design and as a consequence, complex structure. In this case, you should not even think about replacing the broken glass sheet yourself. In some door structures, such an operation can only be carried out at a specialized enterprise.

How to insert rectangular glass

You can replace the broken rectangular glass sheet in the interior doors of the economy class on your own.

Usually the glass sheet in such door structures is installed through the top.

Repair actions include the following steps:

fragments are carefully removed from the door;
the space in which the glass sheet needs to be installed is measured;
glass is ordered in the workshop, of the appropriate size and thickness;
the finished glass is carefully inserted from above interior door;
for strengthening, silicone gel is used, which is applied around the perimeter of the glass;
when the gel dries, you need to remove smudges.

When measuring the space in which a new glass sheet will fit, it is necessary measure the depth of the groove. This value must be added to the resulting dimensions. The depth of the groove is set by lowering a metal ruler into it.

If the glass sheet is fastened with a "glazing bead", then measurements and installation are carried out in the same way. Only the "glazing bead" is previously removed from the door structure. In the end repair work it should be attached to its original place. Fastening is done with small nails.

Replacing the glass leaf in interior doors of this type is a rather laborious process. As a rule, these doors have a collapsible design. And in order to pull out the damaged glass part, the door structure needs to be completely disassembled., replace the glass, and then reassemble. Such work is only possible for a specialist. Usually it is produced in a special workshop.

If we are talking about repairing a door structure made of another material, such as aluminum, then there are some difficulties. If the glass sheet is inserted into the aluminum door in the same way as in the economy class door, and fastened in the manner of a "glazing bead" with an aluminum bar, then replacement can be made. However, direct metal-to-glass contact is undesirable. Therefore, when installing it is worth using a rubber gasket. If the glass sheet is built into the door structure, then it can only be replaced in a special service company.

Replacement of non-standard glasses

Glass sheets in interior door structures, made in a modern design style, can have various forms . It is good if they are oval, worse when the glass is made in the form of a wave.

However, if the glass sheet is replaced through the top, then you can try to do this:

carefully remove the fragments;
collect them on a large sheet of paper, putting each in its place;
circle the glass around the contour with a marker;
now you can order a glass sheet and insert it into the door structure.

Glass for interior doors

Glasses can be different in shape and manufacturing technology. These factors affect the price.

According to glass manufacturing technology there are:

Prices for glass sheets may be different.

If we are talking about transparent glass, then its approximate price can be from 1000 rubles. for 1 sq. m.
Matte can cost from 1600 rubles. for 1 sq. m.
The price of a glass sheet with a matte sandblasted pattern starts from 2800 rubles. for 1 sq. m.
Corrugated can be purchased at a price of 2500 rubles. for 1 sq. m.
Stained glass can be purchased at a price of 8000 rubles. for 1 sq. m.

Conclusion

Inserting a glass sheet into an interior door is not such a simple operation as it seems at first glance. How to repair a simple type door was described in the article. However, if it is necessary to repair a complex door structure, or the broken glass has an elaborate shape, then in these cases it is better to call a specialist who will take the appropriate measurements of the broken glass sheet, draw its drawing and install a new one.

Replacing broken glass when repairing interior doors is a very daunting task. It has many special nuances that must be carefully adhered to. If you make a mistake, then it will be possible to correct it only with the purchase of a new glass.

To prevent this from happening, you need to know about all the small details when repairing glass doors. The design and material of the door panels is also important. Of course, repair specialists do not advise everyone to take on such work. There are only two reasons for this:

The complexity of the design of the door. Modern design developments offer very complex options. Dealing with them will not be possible for everyone. But the first thing you need to understand is how the glass is fixed.
New technologies. Even repairmen are not familiar with all the new products. Each model may have unique qualities. In this case, for the reconstruction it is worth contacting only the master.

In principle, the main problems in replacing glass in interior doors are connected precisely with the complexity and unusualness of modern design solutions. When it comes to a simple apartment without frills, the replacement of a transparent element does not involve any particular difficulties.

To carry out the process of reconstruction and replacement of glass in the door, it is worth carrying out detailed preparation. The first thing you need to know about the required materials. It is important to remember that glass is nothing special and there are many ways to replace it.

Currently presented a large number of options that are offered for decorating rooms. Among them are some methods of glazing interior doors:

Use of decorative glass This option is the most expensive of all possible. Few manufacturers use this insert in their products. Decorative glass can be safely considered ideal. However, even in the best copies there are minuses. In this case, uniqueness and rarity can be distinguished. If the glass is broken on one sash, it will be very problematic to find an identical option.
Plain glass. The most common and frequently encountered option. However, due to its excessive simplicity and low price, it requires additional work. So, there is a need for pasting glass with various films. On average, the cost is 2 times less than the decorative counterpart.
Organic glass. No matter how beautiful and aesthetic glass inserts are, they have their main drawback - fragility. The use of plexiglass completely neutralizes this problem. At its core, such a material can be called transparent plastic. Its only problem is susceptibility to scratches.
Wood fiber boards or plywood. Budget option replacement of glass in the door can be the use of laminated fiberboard. It is also possible to paste over it with a special film. However, this option will become very unaesthetic and unattractive.

How to repair an interior door yourself, read. How to make repairs front door? Useful information in this article .

The standard way to install glass in a door

In most cases, repairing interior doors with glass using quarters is very simple. A common mistake is to confuse them with glazing beads, but in some cases they can really be called that. However, this is not as important as the fact that fixing a door with this design becomes a quick and easy task.

And the process itself involves the following steps:

In the beginning, you will need, using tools like a chisel, to undermine the quarters a little. The main purpose of this is to stick out the holding studs.
The next step involves removing the nails with pliers. In this case, the sequence of removing quarters must not be violated. If this is done, then the glass can fall out at any time and break. Initially, you need to remove the side glazing beads, then the bottom, and at the end, the remaining top. It is at the last step that you need to be especially vigilant.
Dimensions. It is worth taking measurements that will allow you to choose the right glass.
Installation. The process involves only inserting into the door and fastening the glazing beads. That is, no features - just a repetition of the removal in reverse order.
Glass installation. When it comes to opting for ordinary glass, you will need to make extra efforts. For the process to be successful, you need to moisten the surface of the glass with soapy water. When gluing, it is important not to forget to smooth the film. After that, you can install the element in the door and fasten it with quarters.

It is important to be especially careful when removing nails. In the absence of concentration, there is a possibility of damaging the surface of the door, which will necessitate additional repairs.

Today on the market there are a lot of different models of door panels. Designs supplemented with glass inserts are especially popular and in demand. However, there are times when the glass in the door needs to be replaced. Most often this is due to poor product quality or careless handling of the sash.

Peculiarities

Nowadays, consumers are completely unlimited in choice. finishing materials, decor, furniture and door panels for your home. A door suitable in style and shade can be purchased for any interior, whether it is a popular timeless classic or artsy baroque.

Currently, in many dwellings you can meet beautiful and elegant doors with a glass insert. It can have a variety of sizes. So, in stores you can find designs in which glass occupies almost all door leaf or specimens with glass inserts made in the form of narrow stripes. Both of these options look attractive and stylish in their respective environments.

Often beautiful, but fragile inserts in them are broken, even with fairly careful handling. This can lead to very unpleasant consequences. For example, someone from the household may be seriously injured by fragments of a glass insert.

Of course, the destruction of glass in the door leaf can occur not only because of low-quality raw materials. With careless handling of such structures, fragile inserts in them can also break. So, it is not recommended to slam such doors sharply, as this most often leads to disastrous consequences.

You should be especially careful with canvases with glass inserts if small children and pets live in a house or apartment.

Often they, having played too much, slam doors sharply or throw something that can fall directly into the glass. This can lead to a very unpleasant outcome in the form of serious wounds.

Often the glass in the door still breaks or cracks and needs to be replaced. You can do this job on your own. The main thing is to competently and seriously approach this issue and stock up on all the necessary tools and materials.

Glass types

There are several types of glass that are installed in door leafs.

stained glass. These glasses are the most expensive. Replacing such inserts is more difficult, since without it the interior may seem completely different and faded.
Normal. Classic glass surfaces can be supplemented with a special sticker in the form of a decorative film. Ordinary glasses are transparent and frosted.
Plexiglas. This material is not afraid of impacts and is more wear-resistant. It looks more like plastic, which is also often finished with a decorative film.

How to change?

Before the direct replacement of the damaged part, it is necessary to free the door from it.

First you need to remove the door from the hinges (for more convenient operation) and get some accessories.

Tough gloves for cut protection.
Slotted wide screwdriver. With this tool you can pry wooden architraves holding the glass in the door. If your canvas is paneled (collapsible), then a screwdriver may not be useful at all.
Chisel. You can’t do without this tool when working with such material as wood.

Small hammer. A hammer will be needed in the work of fixing the glazing beads with small finishing nails. If you are working with a paneled model, it is better to buy a special rubber mallet to lightly drive in the panels during assembly.
Office knife. Such a knife will be needed to remove the old sealant at the installation site of the new glass.
Rubberized insert or sealant. Special seals not only ensure high-quality shrinkage of the fragile insert, but also prevent rattling during operation of the door leaf. A loose design can also rattle during use.
Construction paper bag, cardboard box or a piece of thick paper. Paper will be needed in order to carefully and safely wrap and remove the fragments left from the previous glass insert.

To install glazed interior doors, the following designs are used.

Shield. These are products where glass is attached using special glazing beads by lining.
With slots for insertion on one side (they are royal). These are models in which the glass is installed in the cavity of the door leaf.
Paneled. In these models, the glass is inserted into the grooves.

Paneled

In order to repair paneled canvases, they must be almost completely disassembled into different parts. Many people are frightened by the large number of details that make up such a door, but do not panic.

The design can not be disassembled, but just open access to the glass.

To do this, you need to know the design of such a door.

Support in a vertical position - side pillars of the door;
Cross support - holds the longitudinal parts and glass;
Panels - thin components of the inserts located between the transverse elements;
The framing part is the same transverse support, but it performs the function of a decorative insert.

Many paneled doors are made according to the tenon-groove principle. They are very easy and simple to understand. Faced with such options, you do not have to clean the necessary areas from the old sealant. After removing the damaged insert, new glass is installed in the same place, and the door is assembled in the reverse order, after which it can be installed in its original place in the apartment.

After removing old and damaged glass, it is necessary to immediately remove the fragments and any little things left from them. This is necessary in order to protect yourself and other household members from serious injury.

Tsargovye

To replace the glass in the tsargovy door, it is also removed from the hinges and laid on a flat surface. After that, using a ruler and a chisel, you need to remove all the plugs located along the edges of the base. Using a screwdriver, remove all fasteners. Now you need to take a small hammer and a bar and use them to separate the drawer over the entire surface of the canvas. You need to do this from the bottom up.

After removing the drawer, it is necessary to remove the old glass from the grooves along with silicone (of course, wearing gloves). At the end, you can safely install a new glass sheet into the grooves right size, put the drawer in its original place, assemble the structure and install it on the hinges in the opening.

Shield

As a rule, glass in such traditional canvases is installed on the sash using glazing beads (wood fasteners). For work on replacing the insert, it is better to purchase new parts, since the old ones can easily be damaged at the time of installation or dismantling of the glass.

First you need to lightly knock out the glazing beads with a screwdriver and a small hammer. It is necessary to slightly loosen the insert, but do not remove the fasteners. Then you should remove the glazing beads located at the top (only if the canvas is removed from the hinges).

After that, the remnants of the old glass are removed. Do not forget about removing the old sealing compound from the door leaf.

A new glass insert in such products is installed in the gap, pre-treated with a sealant. If necessary, a glass seal can be used. Beads are installed on top.

You can fix the parts that hold the glass in the shield base using small nails or smearing with a silicone compound.

What can be glued?

If the glass in the door did not break or crack, but began to stagger, making unpleasant noises, then you can act in different ways.

Purchase a specialized "sanitary sealant" and apply it in a thin strip into the gaps between the glass and the wooden sheet;
Insert regular matches into the corners of the glass piece. Acrylic putty is also suitable for this, which must be applied to the edges of the glass;
Small pieces of cork can be well smeared universal glue and insert into the slots along the perimeter of the glass insert;
Remove the glazing beads, apply sealant to the glass and install them again, but closer to the panel.

These simple works will solve the problem when the glass in the door leaf staggers and dangles. The main thing is to carry out all actions as carefully as possible.

How to hide a small crack?

If the glass in the interior door is cracked, then its repair and restoration of decorative functions can be done in the following way.

Glue a special adhesive for glass furniture;
Glue the affected part with epoxy glue;
Apply moldings to cracks if they are located along the edges of the insert;
Decorate with various films that will cover the damage;
Hide stained glass films.

You should consider in more detail one of the most common options for restoring cracked glass in an interior door with your own hands.

First you need to stock up on silicone glue, a brush, a syringe and acetone, as well as detergent and clear varnish
Next, you need to carefully prepare the glass insert and wash it thoroughly with a glass cleaner and warm water. Inserts need to be washed on both sides;

After they are completely dry, you need to degrease the area where the crack is located. To do this, take a cotton swab and soak it well in acetone. Glue will be applied to a degreased surface much better, and the service life of glass restored in this way will be much longer;
It is also permissible to treat cracks with cotton swabs. However, when using such a device, you should pay attention to whether it leaves behind fibers on the damaged area of \u200b\u200bthe glass;
After careful and accurate processing of the damage, it is necessary to start sealing the crack.

To do this, you need to draw silicone glue into a syringe (of course, without a needle) and fill the crack with it as carefully as possible. Don't rush into doing this. It should be done slowly and confidently so that the composition is evenly distributed over the damaged area.
Today in stores building materials you can find tubes of glue equipped with very convenient nozzles with tips that help squeeze out larger portions.

If the damage on the glass is large enough, then after applying the glue it is worth sealing it on both sides with ordinary transparent tape. The completed work should be left for 12 hours until completely dry.
At the end of this work, you need to cover the surface of the crack with a colorless varnish. To do this, take a thin brush, dip it in the composition and draw over the gluing area. After that, you must wait for the complete drying of the applied varnish, and the work will be completed.

Successful examples and options

Doors with glass look organically in many interiors, and it does not matter at all whether stained glass or ordinary inserts are present in them. The main thing is to choose a design suitable style and colors.

Several organic and stylish ensembles should be considered, in which there are elegant doors with glass inserts.

A fashionable black tsargovaya door with transparent glass inserts will effectively stand out against the background of snow-white walls and a glossy milky floor. Next to such a detail, you can put a small light chair and a metal floor lamp with a bell shade.
The design of a dense chocolate shade with a thin glass line in the middle can be installed in a white room with an accent wall, close in shade to the door leaf. The floor in such an environment should also be finished with white materials and furniture in snow-white and coffee tones should be placed in it.
A luxurious dark chocolate colored door with a long black glass insert will look perfect in a white room with a gray floor finished with glossy tiles. Reinforce the dark canvas with wall shelves of a similar shade and wooden table, simulating weak processing.

Sections of the article:

Interior doors equipped with glass inserts look great and delight the eye of their owner. Such door structures fill the room with light. However, glass is glass, and even today's strong glass breaks sometimes. At the same time, you should not be very upset - inserting glass into an interior door is quite simple.

Glass types

Before considering the procedure for replacing the glass insert in the door leaf, it is worthwhile to study the materials that can be used to perform these works. After all, there are many options that can replace the "classic" glass.

Decorative glass as an insert in the door is one of the most expensive options. Not all door manufacturers use similar glass sheets in their products. In general, this is an excellent option that does not require any additional modifications - the main thing is to find it on sale with the same type of decor or pattern as on the other doors in an apartment or house, which can be a very difficult task. Often, if the glass on one door is damaged, this entails the need to replace glass inserts on all canvases, which can be very expensive, because the price of such glass starts from 1,500 rubles per square meter.

Ordinary glass is a good and, most importantly, more affordable alternative to expensive decorative glass. However, this material requires a slight refinement, which is pasting with a special decorative film. You can buy them at construction markets or in hypermarkets - a wide selection will allow you to find a film for every taste and color. As a result, this option will cost two times cheaper than decorative glass.

Also, as a replacement, you can purchase monolithic polycarbonate (plexiglas). Any glass, whether ordinary or decorative, is glass with all its attributes. With careless operation, such inserts can break, which cannot happen with plexiglass. It is nothing but transparent plastic. There is only one drawback and it is insignificant - plexiglass is highly susceptible to scratches and eventually loses its transparency. As in the case of ordinary glass, a slight refinement is also possible here using the same film.

Rectangular glass replacement

It is not difficult to replace glass of a traditional rectangular shape in a conventional door leaf. Often, a glass sheet or insert is mounted through the upper end.

So, the first step is to remove the pieces of old glass from the door. Then measurements are taken of the space in which the new glass sheet will be installed. After that, glass of suitable dimensions and thickness is purchased. Then it is very carefully inserted through the top of the door leaf. To strengthen the insert, you can apply silicone gel - it is applied around the perimeter of the glass element.

When taking measurements, it is necessary to take into account the depth of the groove where part of the glass goes. Its value must be added to the overall dimensions of the glass sheet. To measure it, lower a metal ruler into the groove.

If the glass is held on the door leaf with the help of the so-called "glazing beads", then both measurements and installation work are performed in the same order, except that the glazing bead must first be dismantled. Then, after installing the glass, it is installed back with small nails.

Premium door glass replacement

If everything is simple with more affordable models of interior doors, then some difficulties may arise with premium models. Such doors require a special approach. The replacement process is very labor intensive. Often, the canvas has a collapsible design, and in order to dismantle a glass insert that is broken or damaged in any other way, you will have to completely disassemble the entire door, then replace the insert and assemble everything back. Usually this work is trusted only by specialists, but you can do the replacement yourself. To do this, you need to know how this or that door model is disassembled.

If the door leaf is not made of wood, but of metal (for example, aluminum), then there are also certain nuances here. In the event that glass is inserted in the same way as on inexpensive doors or glazing beads are used for fastening, then its replacement is quite possible. But it is very undesirable to allow direct contact of the metal of the door with the glass. When mounting, it is best to use a rubber lining.

How to replace non-standard glass

Glass in modern interior doors can be made in a unique design style. The shape of the insert can be very different - it will be better if the glass is oval and much worse if it is made in the shape of a wave.

If the glass is inserted into the canvas through the top, then the first step is to remove the fragments of the broken glass insert. Then, using a felt-tip pen or marker, the resulting hole is outlined along the contour on paper or cardboard. After that, you need to order a new glass of the required shape in the workshop, after which you just have to insert it into place.

Features of working with panel structures

Paneled doors are very popular. Replacing glass is associated with the need to disassemble the structure. Often, these door panels are easy to disassemble. The glass in them is a panel. The canvas can consist of a vertical and transverse support, glass between them, as well as a baguette - this is a kind of decorative element.

The connections are based on a locking system - on most models it is a tongue and groove. It is not necessary to completely disassemble the door into its constituent elements - the main thing is to open access to the glass. Then, everything that remains of the damaged glass is taken out of the door structure, and a new one is installed in its place, after which it remains only to assemble the structure back.

Sliding door glass replacement

Doors equipped with glass can be not only hinged - there are many designs and sliding solutions among them. If glass breaks in such an interior door, the first step is to dismantle the canvas, and in order to get to the glass, it is necessary to remove the metal frame-frame of the door. Due to the large dimensions, this can cause certain difficulties.

Decor

For creative people who like to improve something, make the world around them and other people a better place, the usual process of replacing glass can be turned into a creative work. For example, you can get an interesting effect if the new glass is illuminated from the inside. How to do it? Everything is very simple - in the groove where the glass is inserted or in its end, they install led strip. The system is then connected to electrical network. It is also possible to equip the door leaf with a microswitch so that the tape only lights up when the door is closed. Such decor gives a very wide scope for imagination and creativity, and the result can be very interesting and unique.

Some interior doors are equipped with small glass that breaks easily. If it is broken, you will have to replace the glass in the door. However, before that, you need to figure out how to properly carry out the replacement.

There are four types of glass that can be installed in the doors.

transparent

Most often, transparent glass is installed in door structures, which differ from other types of affordable cost. Among the shortcomings, brittleness is distinguished, since such material is easily broken. If the transparent glass is not very cracked, it can be glued with a decorative film.

Matte

Sometimes doors with frosted glass inserts are installed in apartments. Such an interior door not only decorates the interior of the room, but also protects it from the penetration of bright sunlight.

Also, the advantages of matte material include its high density, reliable sound insulation and moisture resistance.

patterned ribbed and stained glass

The main feature of this type of glass inserts is their uneven surface and opacity. The advantages of corrugated coatings include a low level of sound transmission, thanks to which it is possible to protect the room from extraneous noise.

Tinted or mirrored

Mirrored and tinted glass inserts are more often used in shopping centers, but some manufacturers install them in interior doors. Glass surface tinting impairs light transmission through the glass and makes it less transparent.

Material selection

Before replacing the leaf on the door, you need to familiarize yourself with how to choose a new glass material. The following important factors must be taken into account:

Product type. You can put ordinary or decorative glass material in the opening. Some install plastic polycarbonate in the door, which is different in density.
Dimensions. Special attention pay attention to the dimensions of the canvas, as it must fit into the grooves.

How to remove cracked glass

To properly remove the cracked glass, you need to figure out how to do it right.

What you need

Allocate several materials that will be needed to complete the work.

Gloves

It is no secret that glass can cut you, and therefore it is recommended to think about protecting your hands in advance. Experts recommend protecting the skin from sharp glass corners with gloves. Do not use garden gloves, as they are too thin. Instead, it is better to use products made of durable rubber.

Broom and shovel

Broken glass leaves many small pieces that need to be disposed of. Some people clean them with a vacuum cleaner, but it's better not to do this. To collect the fragments, you need to use an ordinary broom with a scoop. Sweep very carefully to collect all the debris from the floor.

Chisel

A chisel is the main tool that must be used when replacing door glass. With its help, gently pry off the glass sheet and pull it out of the door. It is recommended to use small chisels with a thickness of no more than 2-3 millimeters.

Several pieces of thick paper

It is no secret that glass is installed in special grooves on the doors. Sometimes the thickness of the glass is not enough, and it begins to hang tightly in the door groove. To solve this problem, it is necessary to use a special sealing material. For sealing, strong paper or rubberized material is used.

small hammer

To remove the door glass, you will need a small construction hammer. This tool is used to remove the glazing beads that hold the glass in place. Beads must be beaten off carefully so as not to accidentally break them with a hammer.

How to shoot

Having prepared necessary tools, you can begin to remove the broken glass sheet. First you need to remove the door from the hinges and put it on a flat surface. Then the hammer and chisel are loosened and the glazing beads responsible for holding the canvas are carefully removed. After that, all the remnants of the glass are taken out of the door.

Disposal

All unnecessary glass must be disposed of so that there are no fragments left on the floor. To do this, the floor is swept several times with an ordinary broom. The collected garbage is placed in a trash can or other container. Glass fragments must be taken out of the apartment immediately so as not to accidentally get hurt in the future.

Checking and replacing the gum between the spatula and the glass

Sealing rubber bands are often glued between the glass sheet and the fastening bead, which are used to increase the tightness of the joint. Experts recommend removing the old gum and replacing it with a new one. During removal, it is carefully pry with a blade and disconnected.

What to replace

There are several materials used to replace broken glass.

Special decorative film

Sometimes people paste over broken glass with special decorative strips. The film surface is opaque and weakly transmits light. The advantages of this material include the fact that it fits well into any interior of the premises.

Fiberboard sheet

Some people don't have new glass to replace and have to use other materials. Most often, fiberboard sheets are used instead of glass sheets. It is best to use such plywood sheets to close doors that lead to a utility room or basement.

Glass

AT doorways The following glass types can be installed.

Normal

A common type is ordinary glass, which is considered the most affordable. The advantages of such a glass sheet include the fact that it is easy to install.

organic

Organic sheets are made from a special plastic material. Some experts do not recommend using organic materials as they are subject to mechanical damage and corrosion. To protect the surface and extend the life of the material, it is necessary to treat it with a protective mixture.

stained glass

Stained glass is the least used because it is the most expensive. The high cost of such products is due to their high strength. It is very difficult to break such glass sheets. Another advantage of glasses is their attractive appearance.

hardened

Tempered glass sheets are glass sheets that undergo heat treatment during the manufacturing process to increase the level of strength. After heat treatment, the density of products increases eight times.

Such glasses are most often used in the manufacture of partitions, countertops and double-glazed windows.

How to paste

It is necessary to familiarize yourself in advance with how the insertion of new glasses is carried out.

Tools and materials

Allocate a number of materials and tools that will be needed to carry out the work.

sealant

Sealant is called an elastic liquid, which must be used to fill cracks, joints and cavities. When installing a new glass, the surface of the glazing beads and the installed canvas is treated with a sealant.

small nails

Nails are considered the most common fastening material used to secure wooden crafts. Small nails will be needed to attach the glazing beads to the door.

A hammer

A hammer is a percussion tool often used in the construction industry. When working with the door, it is recommended to use not metal, but rubberized hammers. When using them, it is difficult to damage the surface.

Glue

Glass is attached to the door with wooden glazing beads. However, sometimes this is not enough and you have to use other additional means for fastening. Most often, superglue is used, which is applied to the edges of the glass sheet.

Rubber insert

To better fix the installed glass, use a rubberized insert. It is installed if the door grooves are too wide and the glass dangles.

Replacement scheme

Before putting in a new glass, the grooves on the doors are cleaned of glue residue and treated with sandpaper. Then a new sealant is poured into the cleaned recess, on top of which a rubber gasket is installed. After that, a new glass is fixed in the opening, which is reinforced with glazing beads.

Features of work

There are certain features of the work that you need to familiarize yourself with.

King's door

Tsargovy designs are made of vertical racks which are connected among themselves by horizontally located levels. These doors are strong and durable.

The main feature of replacing glass in the tsargovy door is that you have to remove the vertical racks.

Sliding design

Replacing glass on sliding structures is quite difficult. You will have to completely disassemble the door, because the fixing components of the canvas are in the sliding system. It is better to entrust such work to specialists who have repeatedly dismantled sliding doors.