How to glue vinyl wallpaper correctly: instructions with photos and videos, professional advice. How to properly glue vinyl wallpaper How to glue vinyl wallpaper

When renovating a home, many people face difficulties in wallpapering. Paper wallpapers are losing their popularity every day, giving way to their vinyl brothers. With an eye-catching design, vinyl wallpapers waterproof, UV-resistant and durable, they can easily hide any wall imperfections. Such wallpapers are the perfect companion for a young family, allowing parents not to renovate the children's room every year.

Due to the unique technology of vinyl production, the surface of such types of wallpaper can visually imitate natural fabrics and materials such as leather, wood, marble and silk. Its only drawback, perhaps, is that when smeared with glue, they are easily stretched, and when the glue dries, the wallpaper loses its shape and shrinks.

Therefore, the faster you glue them, the less defects can be seen in the work performed. But, before proceeding with the repair, you need to find out what is the main advantage of vinyl as a material and the technology of how to glue vinyl wallpaper.

Types of vinyl wallpaper

Such canvases are made from foamed polyvinyl, which gives the material structure, which, combined with increased density and a variety of textures, makes it possible to hide defects on the surface.

A variety of colors, textures and manufacturers will allow you to make an individual choice, in accordance with the taste of the owner. The ability to paint vinyl wallpaper, being a kind of bonus, allows you to show your imagination and decorate the walls in an exclusive and sophisticated style.

Vinyl (polyvinyl chloride, or PVC for short) is a transparent colorless plastic, which is chemically resistant to acids, solvents, alkalis, does not burn in air and is characterized by low frost resistance up to -15 0 C, glued to a paper base.

To date, there are two options for vinyl material: paper-based and non-woven. For paper-based wallpapers, the bottom layer is made of paper, and the top layer is made of polyvinyl chloride.

How to choose and glue vinyl wallpaper video

Wallpaper preparation

The preparation process began, in fact, in a building materials store at the moment when the color, pattern, and also the number of rolls corresponding to the area were selected. All further recommendations will relate exclusively to the process of cutting rolls and joining the pattern. Cutting vinyl wallpaper begins only after combining the pattern. Care should be taken to ensure that the subsequent canvas is combined with the previous one.

Glue preparation

Dissolve the glue following the instructions. It is necessary to take a clean container, pouring into it the amount of cold water specified in the instructions. clean water. Working with a drill with a mixer nozzle, you should slowly bring it into the water. It is strongly not recommended to immediately pour out all the dry glue, it is important to do this gradually so that lumps do not form in the mixed substance. After mixing the whole pack, let it stand for a while, then mix thoroughly again. The consistency should not be too thick.

sticking

The most important stage of repair, how to glue vinyl wallpaper, should be approached with the utmost seriousness and painstaking work. Since the canvases of vinyl wallpaper are on top of each other, the joints will be invisible. Therefore, you need to combine the canvases with maximum accuracy.

First, let's make a markup by drawing a straight vertical line on the wall, which will be your reference point. It is desirable that the first panel is glued from the window. The glued wallpapers are straightened from top to bottom with a brush with short bristles. To avoid the formation of bubbles, the brush must be moved from the center to the edges of the cloth.

All subsequent strips of vinyl wallpaper are glued back to back with the previous one. It is strongly not recommended to wipe excess glue with a wet cloth. Drafts should be avoided by maintaining an average temperature in the room to be pasted over.

In order to glue wallpaper in the corners with high quality and correctly, wallpaper pasteurists advise not to bend the entire panel for pasting at the junction of the walls. It is undesirable to combine two solid panels in one corner. Optimal for the corner is a sticker of a continuous strip with an overlap of 3 by 5 centimeters.

How to economically and quickly paste vinyl wallpaper video

Trimming the excess from above and below is necessary only when you are convinced that no bubbles have formed on the glued wallpaper. Having found a bubble, you need to quickly pierce it with a needle, force the air out of it and press it carefully so that the wallpaper adheres tightly to the surface.

Sticking vinyl wallpaper in hard-to-reach places

Problem areas when gluing finishing material for walls are windows, doors, cornices, skirting boards and radiators. However, the most difficult area to work with is electrical outlets and switches. To carefully and correctly glue the wallpaper in this area, you must:

1. turn off the electricity in the room;
2. remove all electrical outlets in places where wallpaper will be glued. It is important then to remember their location, so that after gluing you do not have to look for them under the panels;
3. stick wallpaper;
4. make cruciform cuts in the area of ​​\u200b\u200bswitches and sockets;
5. bend the corners in the places of the cuts inward, under the switch (socket);
6. install switches and sockets in place.

If you decide to reinforce theoretical knowledge in practice, but so far you are afraid to start repairing yourself, then watching the video material on our website will allow you to avoid many of the troubles associated with wallpapering.

How to glue video wallpaper

In conclusion, I would like to wish all beginners and wise repair masters not to be afraid to take on vinyl. If you delve into all the subtleties of this difficult, but fascinating business, then you will understand that gluing vinyl wallpapers is not as difficult as it might seem at first glance. As they say - the eyes are afraid, but the hands do!

The procedure for gluing vinyl wallpaper begins with an assessment - purchased paintings and wall surfaces of the room. Wallpaper must be from the same batch, identical in color and pattern. The walls are without defects, curvature, etc. But they are rarely like this even in new buildings, so it is necessary to prepare them.

When buying wallpaper, keep in mind that the seller is not responsible for defects that appear on them during gluing and for the results of gluing in violation of the instructions.

Suppliers accept claims for differences in color or article numbers strictly before the roll has been cut. Refunds for other defects are only possible if no more than one roll is pasted.

Preparatory work

Proper wall preparation

If there are old wallpapers on the walls, they are removed. The removal method is selected based on how high quality the glue was. Several withdrawal options are possible:

• dry
• with a steam cleaner
• through soaking,
• using a specialized wallpaper remover.

If the surface was previously painted or whitewashed, it is cleaned and washed.

When preparing new walls, the first stage is skipped, immediately proceeding to the second - alignment. All defects (cracks, irregularities, holes, etc.) are eliminated with masking tape, plaster, primer or putty.

After that, the wall must be completely processed with a primer. It is selected according to the initial data.

For example:

• indoors with high humidity a specialized moisture-proof primer is used;
• If the walls are old enough, then a penetrating acrylic primer is relevant;
• For brick or concrete, it is worth choosing a mineral one.

Since vinyl is a dense material, finishing with putty is not required. To prevent fungal formations, a fungicidal composition is applied - unless it is indicated anywhere that the wallpaper already has a fungicidal impregnation.

Room preparation

If repairs are carried out in the summer, then it is necessary to close all windows tightly, excluding even minimal air movement. In winter, the air conditioning (if any) is turned off.

This is necessary for high-quality drying of the glue within the allotted time, without excessive acceleration (which can be facilitated by drafts, etc.).

It is mandatory to turn off the electricity to avoid accidents (especially important with old wiring). All decorative elements are removed from the walls (linings from electrical outlets, plinths, etc.).

The required air temperature is not lower than 10-13 and not higher than 23 degrees. The floor is clean, dry, ideally covered with polyethylene.

Wall covering preparation

After making sure that the wall surfaces do not crumble, are even, clean and dry, you can start preparing the wallpaper. The roll is rolled out and cut into strips corresponding to the height of the room plus an allowance of up to 10 cm.

If the wallpaper is decorated with a pattern, then the pattern is first adjusted and only then cut.

For convenience, immediately cut into 10-12 strips. In the absence of a pattern, they are stacked on top of each other in any order, if there is one, strictly in order in accordance with the fit. There can be several stacks - based on one wall, on two or immediately on the whole room.

Water is poured into the selected container (in most cases, a bucket) in the amount indicated in the instructions. Glue is poured in a thin stream, with constant stirring. This will help to avoid lumpy formations that degrade the quality of the adhesive.

If the lumps nevertheless turned out, they must be broken, otherwise you will have to catch them in the process. With a large number of them, the glue will turn out to be more liquid than required, since the main part of the composition will remain unmixed.

Required Tools

For sticking vinyl wallpaper you will need:

• Sharp stationery knife for cutting strips.
• Measuring tool (ruler / tape measure for marking, plumb line / level for obtaining an even vertical), pencil.
• Special glue for vinyl wallpaper (let's say universal, if necessary - for heavy wallpaper) and containers for it.
• Mixing device.
• A wide brush, brush or roller for spreading walls and canvases with glue.
• Narrow small brush for greasing seams and individual areas.
• Wide rubber roller or spatula for smoothing glued strips.
• Narrow roller for pressing seams.
• Sponge, cotton cloth to remove the glue that has come out.

The blade of the knife must be sharp all the time, otherwise there is a risk of damaging the coating. For high-quality gluing, two people will be required - while one from above applies the strip to the wall, the second from below supports it and corrects the evenness of the overlay.

To prevent the bevel of the canvases, the wall is marked. To do this, with the help of a level and a pencil, a vertical, even line is drawn, which should be guided in the future.

Strips are glued only end-to-end, overlap is unacceptable. When working with non-woven vinyl wallpaper, only the wall is smeared with glue. If the base is paper, then the base.

This information can be found on the roll - there is a special designation where the glue is applied - on the wall or on the canvas base.

The adhesive layer must be uniform, non-smeared dry areas are unacceptable. When applied to wallpaper, the edges are additionally carefully smeared. The canvas is allowed to rest for 3-5 minutes for impregnation.

The first strip is applied strictly along the vertical markings, smoothed out from the center to the sides so that no air remains between the wall and the wallpaper. Smoothing is carried out carefully, without stretching the fabric.

Particular attention is paid to the joints. Excess glue that has come out is immediately removed. Allowances are cut off after the strip dries, otherwise they can stretch and deform the bottom of the canvas. The second strip is glued end-to-end with the first.

Places where electric points are installed are also covered with wallpaper and marked with a pencil. After the coatings have dried, holes are cut in accordance with the markings obtained, and the linings removed at the stage of preparing the room are installed back. The time for complete drying of the glue is indicated in the instructions.

Trying to figure out how to properly glue vinyl wallpaper? They have their own characteristics in the application and, knowing them, the gluing process will not be difficult. Washable vinyl wallpaper - very convenient and practical wall material. They are moisture resistant, it is easy to remove dirt from them, and they contain special antifungal components.

For those who decide to insulate their balcony or loggia and comfortably finish and equip this new room, we can safely advise the use of this material. Properly selected wallpaper will not only give the balcony a pleasant appearance but will last a long time.

• Vinyl wallpaper on non-woven base. The most durable of all types. Such wallpapers are waterproof, have some leveling properties (visually hide surface irregularities), are easy to use (glue can be applied directly to the walls), have a long service life, and have a beautiful and rich appearance.
• Vinyl wallpaper on paper basis. They consist of two layers: paper and polyvinyl chloride. They are less durable than non-woven, but will last longer than many other types of wallpaper. Available in both smooth and embossed textures
• Vinyl wallpaper for painting. They can be both paper and non-woven. They are impregnated with a special composition that prevents the penetration of moisture, and painting creates an additional protective layer. The structure of the wallpaper can be completely different

Once you have decided which type you will use, you can begin to calculate required amount wallpaper and all necessary materials.

Calculation of the amount of materials

One of the proven and reliable ways to calculate the required number of wallpaper rolls is to determine the perimeter of the floor and the height of the room. To do this, add up all the sides of the floor and multiply the resulting number by the height of the room. Then subtract from this the area of ​​the window and doorways and divide the remainder by the area of ​​one roll. Round up the final number - you have received the number of rolls that will be needed for pasting a particular room.

If carried out sticking vinyl wallpaper with a pattern, additional calculations will be needed to fit the image. An important concept here is the pattern pitch - the distance separating two identical images along the length of the roll. The difficulty lies in the fact that the actual step may differ from this figure, since you will be gluing the right and left parts.

Please note: in order to avoid difficulties, add 5 cm per strip in 10 cm increments. The amount of waste in this case will be equal to half the step from each strip.

Once you've figured out how many rolls of wallpaper you'll need, you can figure out how much glue you'll need. Do not blindly trust what is written on the package. The amount of glue for vinyl wallpaper is determined on the basis that a pack of 250 g is enough for an average of 20-25 sq. Sometimes the flow rate may exceed these parameters.

Necessary materials and tools for work

You have selected suitable wallpapers, determined how much material is required. Next prepare everything necessary tools. In the process of preparing the room and when we glue vinyl wallpaper, we use:

• Level
• ruler
• Scissors or knife
• Brushes for applying glue and primer
• Small brush for extra coverage of small areas
• Roller to roll the seams
• Spatula for leveling wallpaper strips
• Spatula for pressing wallpaper areas in hard-to-reach places
• Rags and sponges to remove excess glue from the wallpaper

Now you have stocked up with everything you need. Familiarize yourself with, and you can proceed to the direct process.

Stages of work

Stage I: Wall preparation

1. Remove old finishes from the walls: wallpaper, whitewash, paint. Surface must be level
2. Treat the walls with a special antifungal solution
3. Dilute adhesive for vinyl wallpaper and prime the wall
4. Using a level, draw a vertical line - a guide for the first piece
5. Turn off the electricity, remove all switches and sockets from the walls

Stage II: Sticking vinyl wallpaper

1. Cut the rolls into even strips (+ 10 cm allowance)
2. If you glue non-woven wallpaper, then smear the wall with glue. Paper - glue is applied to the strips themselves
3. Place the first piece exactly along the drawn line. It is better to glue in pairs: one person applies the upper part of the piece, and the second supports the lower
4. Glue the remaining pieces back to back. If the wallpaper has a pattern, don't forget to combine it
5. Smooth out the glued pieces of wallpaper with a roller from the center to the periphery. Air bubbles must not remain
6. Roll the seams carefully
7. Apply glue to the outgoing areas
8. Remove any excess adhesive
9. Trim excess wallpaper from the ceiling and baseboards. Use only sharp scissors or a knife. dull blade tears wallpaper

Sticking vinyl wallpaper completed.

How to glue corners and joints: refinement of small things

The most difficult and painstaking work is the refinement of small things and gluing corners and joints. To avoid trouble in the form of gaps and pronounced seams, overlap the pieces of wallpaper. For vinyl wallpaper on a non-woven base, it is 1-2 mm, on paper - up to 5 mm. It is somewhat more difficult to solve the issue of gluing corners.

This is the most difficult part of the job: the question, how to glue corners, often confuses, especially beginners. Starting this stage, thickly coat the corner with glue. It is better to cut the canvas in such a way that it goes 2-3 cm onto adjacent walls.

If you measured the angle with a level and found that it is very “littered”, use the cutting method. Glue the first piece in the same way, only leave the edges wider - about 9 cm. Position the side strips from it strictly vertically (the same level will help with this) at a distance of 2 cm. Cut the overlap with a sharp knife - both layers together. And then glue it back upper layer.

Completion and quality check

After all the main stages of work are completed, check how you glued the vinyl wallpaper. See if there are any unglued areas and bubbles on the walls. Replace previously removed sockets and switches. If there are any radiators, batteries or other devices in the room behind which hard-to-reach sections of the wall are located, then they can not be pasted over, but simply painted in a color similar to the wallpaper.

You have become familiar with how to glue vinyl wallpaper, and learned that even on the balcony and loggia they can be used as wall decoration. If this article helped you make repairs, then leave your comments. Or maybe you have your own secrets of wallpapering? Please share your unique experience. Your advice can be very useful to many people.

How to glue vinyl wallpaper photo

Below are photos on the topic of the article “How to properly glue vinyl wallpaper: step by step instructions". To open the photo gallery, just click on the image thumbnail.

How to glue vinyl wallpaper video

We also invite you to watch the video on the topic of our article. This video shows you how to properly install vinyl wallpaper.

Liked the article? Subscribe to site updates via RSS, or follow the updates:
In contact with , Facebook , Classmates , Google Plus or Twitter.

Subscribe to updates by E-Mail:

Tell your friends! Tell your friends about this article in your favorite social network using the buttons in the panel on the left. Thank you!

Discuss article

To the entry "How to properly glue vinyl wallpaper: step-by-step instruction" 10 comments

For the first time, when it was necessary to glue vinyl wallpaper in the apartment, there was a slight shock. How to work with them?! But after reading the articles, having studied all the subtleties, wallpapering was not as bad as it seemed to me at first. The most important thing in this case, in my opinion, is to prepare the wall well for wallpaper. It should be clean (without any traces of the old coating) and even.

And I was just very disappointed for the first time after gluing vinyl wallpaper, because I didn’t know all these subtleties and pasted this together with my husband. On the second day, they simply gasped together, the joints generally bristled. So for me the joints and corners turned out to be a big problem, and for the second time they hired a specialist. It is a pity that such an article did not catch my eye earlier then.

I recently glued non-woven vinyl wallpaper in a country house. Irregularities, of course, they hide a little, but I had to fiddle with the joints for a very, very long time. Due to the fact that the walls are slightly uneven, the wallpaper goes either butt-to-butt, or overlaps. Where joint to joint - everything is fine, even the seam is almost invisible. But that's where the overlap is the trouble. Wallpaper does not want to stick together, so the top layer sticks out very much. Maybe it's because the wallpaper is thick.

We glue wallpaper at home always on our own. It always turns out differently. We often argue with my husband about how to properly glue wallpaper. After reading the article, we learned many subtleties of this difficult matter. It was useful to learn the stages of work, we realized our mistake, that we did not have the right organization and did everything in a blunder. Now we will glue strictly according to your recommendations.

I was looking for a similar instruction on the net for a very long time, and thank you so much that you painted everything step by step. my husband is on a business trip and I had to do this “fun” thing myself - to glue wallpaper. it’s not an easy business, but there were helper children nearby (although they are 5-6 years old)) and a fighting spirit) I’ll start by saying that it’s very difficult to choose a wallpaper, firstly, to find quality goods and for a nice price - it’s not always easy, secondly, to match the interior so that after a year or two your eyes don’t get tired - sometimes you don’t have enough patience, well, to please all family members by color and pattern is not an easy task. in general, we dealt with this quickly, but here’s how to glue them if you don’t call a team ... if I hadn’t found a video and photo, I would hardly have taken up this business. for me the most difficult was: gluing the corners. if not for your site, it would be just a “corner hell”, since I didn’t know how, what and where. thank you so much! in general, my wallpaper was glued in 3 days)) with my own hand) so I feel like a heroine)) everyone is happy, thanks to you))

When we glued vinyl wallpaper in a private house, the “first pancake” was a huge lump! But ... the Internet to help and having learned from this article a lot of all sorts of problems - they risked gluing another room on their own! A nice hint was the application on the walls antifungal agent. I hope the walls won't get moldy. But all the same, it was worth a lot of work to glue the corners correctly! But we did it! Now we have the experience of gluing and the next rooms are not so scary. I would like to put wallpaper in the living room. I think we can do it now!

The main thing is that before gluing vinyl wallpaper, you need to make preparatory work- choose the right glue and do everything in accordance with the recommendations below. Then there will be no bubbles, glue streaks and stains on the wallpaper.

Rules for sticking vinyl wallpaper

In order for the wall to remain beautiful after pasting, and the vinyl coating to hold firmly, you must follow simple rules:

• An important nuance of vinyl wallpaper with rapport is that they should be glued joint to joint, making up a pattern. It is necessary to glue directly if the marking on the package contains arrows located opposite each other. Otherwise, pasting with an offset is assumed. The distance in centimeters to which the adjoining strips must be moved is indicated on the packaging.
• Before gluing, you need to choose the right glue. It could be special compound for vinyl wallpaper, if the base is non-woven. For a paper base, an ordinary adhesive mass is sufficient. The main thing is that it has a sufficiently viscous consistency.
• Canvases on the wall are glued from top to bottom. First, the section is pressed along longitudinal axis. Then you need to expel excess glue and air to the sides. To do this, use a roller or a dry, clean rag.
• The edges are smeared especially carefully. A well-made counter docking assumes that the joints are rolled with a special narrow rubber roller or pressed with rags. To remove the adhesive means to rid the walls of stains.

Apart from general rules how to glue affects the type of base vinyl wallpaper. It can be paper or non-woven. And if in the first case the canvas is lighter, then vinyl wallpaper on non-woven fabric, which has a foamed embossed coating, is heavy, thick, and this must be taken into account.

Features depending on the base

What is the best way to glue vinyl wallpaper?

The choice depends on the type of material that forms the basis of the vinyl sheets. If it is paper, you can use PVA glue, but it is difficult to achieve quality, since the strips will slowly slide under their own weight. The use of a paste is also not recommended, since the substance of flour and starch is a suitable medium for the life of microorganisms. So how to glue the wallpaper so that they do not move away from the wall?

On a non-woven basis

Specialized mixtures are used, which include modified starch. And so that mold does not appear, components are used that, in addition to the antiseptic effect, increase the viscosity and stickiness.

paper based

Adhesives are allowed for paper wallpaper. But this is when there are no foamed relief elements on the surface of the canvas that make the wallpaper heavier. If painting is supposed to be done, this method will not work. But when it comes to a surface with a colored pattern, paper wallpaper glue can be used.

IMPORTANT! Adhesive consumption is usually indicated on the adhesive packaging. But it depends on the type of surface and the basis of the wallpaper. On average, consumption is 180 g of dry matter per 4-5 rolls.

Tools

To fulfill all necessary action, at hand you need to have:

• utensils for making glue;
• rollers for squeezing out excess glue and air;
• plastic wrap to cover the floor;
• dry rags to ensure cleanliness;
• narrow rollers for rolling the opposite joint;
• wallpaper knife, pencil or ballpoint pen;
• measuring ruler and guide for cutting strips;
• a wide spatula, which is useful for fitting the canvas;
• special corner rubber roll for rolling internal corners.

All this must be prepared before gluing vinyl wallpaper, regardless of the type of base.

Training

Before performing the final interior decoration, you must do the following:

1. Decide on the selection of vinyl wallpaper and glue.
2. Prepare surfaces.
3. Remove all repair damage.
4. Turn off electricity.
5. Remove covers for sockets and switches.
6. Buy the necessary tool.

In addition, before gluing the wallpaper, you need to familiarize yourself with the recommendations for diluting the glue and preparing the wall surfaces.

How to properly dilute the glue?

Dry granules are poured into water. The solution is constantly mixed manually or with the help of special nozzle on a drill or screwdriver. Cooking instructions are on the packaging. The main thing is that you do not need to knead the whole pack. Sufficient amount - for three or four lanes.

Surface preparation

You can not glue vinyl wallpaper on paint, old wallpaper, foam. The canvas will not stick to OSB, tiles and laminated panels. concrete walls fit, but if they are uneven, defects are eliminated with putty. Strips are glued to plasterboard structures without prior preparation, if the surface is clean. Before gluing, you need to remove the residues:

• old wallpaper;
• lime;
• paints or whitewash;
• oil stains and dirt;
• everything is superfluous.

You need to clean it as thoroughly as possible, up to removing the plaster and applying a new layer. The surface must be primed.

wall gluing technology

When cutting strips, you need to take into account the presence of a pattern. If it is necessary to glue with a shift, the margin that is laid in order to fit the pattern is taken into account. The strips are glued butt to butt without overlap. If the base is non-woven, the strips do not need to be coated. The sequence of actions is reduced to four stages.

What about hard to reach places?

The technology of pasting external and internal corners is a specific process that involves the use special means. Pasting the walls around the window (door) openings and behind the batteries, you need to pre-measure and cut out the necessary pieces.

The photo shows a scheme for gluing wallpaper around sockets and switches:

In the photo, the scheme of wallpapering behind the radiator:

Step-by-step instructions for gluing the ceiling

Strips of vinyl wallpaper are glued from the window to the entrance. Direction - across the length of the room. The technology is similar, but has a number of features.

Video guide step by step

For clarity, it makes sense to watch a specially filmed video, which describes in detail how to glue vinyl wallpaper on the wall and ceiling.

The room must remain closed during the day. Draft leads to overdrying. Forced heating is also undesirable, and the use of heaters is prohibited. Windows and doors can be opened within a day. But if it is cold outside the window, and the room is not heated, you will have to wait 2-3 days.

Having done everything as described above, everyone can stick vinyl wallpaper with my own hands and save money.

Home repair is a troublesome business, especially when it comes to interior decoration that sets the tone for the entire interior. The presence of errors can spoil the entire design of the room. We will help you avoid them by analyzing in detail how to glue vinyl wallpaper on the ceiling and walls.

General provisions

First, let's pay a little attention to the chosen material. Why exactly vinyl wallpaper, what is special about them? Everything will become quite clear after reviewing their qualitative characteristics.

Advantages

The products in question are a non-woven or paper base coated with a layer of vinyl.

This structure provides them with many advantages:

• moisture resistance. Excellent quality, which is unusual for most other types of wallpaper. But vinyl not only resists moisture quite reliably, but is also able to withstand wet cleaning using household chemicals and even painting.

• Wide range of possible models. In addition to a stunning selection of a variety of ornaments and colors, there are also textured and silkscreen designs.

• High resistance to mechanical damage, ultraviolet radiation and even temperature extremes. That is, if you are opposite the south window, get a cat and begin to arrange long-term ventilation in winter, they will still retain their original appearance.
• Long service life, which reaches ten years.
• Simple sticking instructions, which we will analyze further in all the subtleties.
• Acceptable price. The whole set of strength characteristics is quite affordable for the budget of the average man in the street.

Flaw

The only thing that can happen unpleasant after applying the wallpaper in question is the presence bad smell the first two months. But this is subject to the purchase of cheap samples from an unknown manufacturer. Qualitative models do not have this effect.

Tip: if you still managed to stick foul-smelling canvases, and even airing does not help, then it is recommended to paint them with acrylic paint.
The polymer layer will block the contact of vinyl and air, eliminating the spread of odor.

Application technology

First of all, you should prepare everything necessary for the implementation of finishing work.

Tools and materials

For work you will need:

• Velor roller. Simplifies the processing of canvases and walls.

• Brush. Allows you to qualitatively cover hard-to-reach places with glue.

• A clean bucket for diluting the adhesive mixture.

• Special bath with ribbed surface.

• Stepladder - so that you can get to the top of the wall and ceiling.

Tip: choose a ladder that has a shelf on top.
Then you will have where to put the container with glue.

• Metal or plastic. It makes cutting fabric much easier.

• Roulette for all necessary measurements.

• Stationery knife for cutting wallpaper.

• Brush for smoothing products on the wall.

Tip: before gluing heavy vinyl wallpaper, be sure to make sure that the prepared brush is sufficiently stiff.
Because soft bristles will simply crumple on dense canvases and will not cope with their task.

• A clean rag to remove spilled drops of glue on the front side of the finish.

In addition to tools, you need to take care directly of the materials themselves:

1. Wallpaper choose in accordance with the rest of the interior of the room and its functionality. products designed for painting are better suited, and for the living room, for example, silk-screen samples. The color scheme is also very important and can have a significant impact on the feel of the occupants, visually expand and narrow the room.

1. How to determine when buying which adhesive is best for vinyl wallpaper? There are no secrets in this and you should not invent something new. Just read the attached instructions for the glue, and check with the seller for details.

1. Putty. It will be necessary if large cracks and significant damage are found in the wall after removing the old finish.

Preparatory work

Before sticking vinyl wallpaper, you must carefully prepare the surface of the wall.

Although such large-scale work with perfect alignment, as in the case of using paint, is not required, some things still need to be done:

1. Removing the old lining:
   • We wash off the paint with a special chemical composition.
   • We knock down the tile with a perforator.
   • We remove the wallpaper with a sharp metal spatula, after wetting it with water.

1. We putty possible cracks and noticeable irregularities.

1. We prime the wall. Do not refuse this step, even if it seems overhead and superfluous to you. Primer creates polymer layer, which increases adhesion, protects the surface from physical influences and reduces its porosity.

Sticking

Now let's figure out how to stick vinyl wallpaper:

1. We dilute the adhesive mixture with water according to the instructions indicated on the package.