How to switch to tone mode panasonic. How to put the radiotelephone into tone mode. How to put your mobile phone into tone mode
How to switch to tone mode phone Panasonic KX-TCD225RU 9 handset with base) and got the best answer
Answer from Navigator[guru]
. KX-TCD225RU. KX-TCD215 ...Thank you
for the purchase of a new Panasonic digital cordless phone. Reference...
temporarily switch the dialing mode from pulse to tone. ..
link - -1k=32 -th page of the manualSetting the base 000Call optionsDial modeTone .... confirmation is required everywhere (RIGHT arrow)
Answer from Egor Gavrilenko[newbie]
Temporary tone set or permanent?
Temporary tone dialing (for
pulse dialing subscribers)
If you need to access
tone dialing services (for example, to
telephone banking service), you can
temporarily switch the dialing mode from
pulse to tone.
1 Make a call.
2 When prompted to enter your code or PIN
code, press (*) and then press
corresponding dial keys.
Note:
L Pulse dialing
recovering
Just in case, the manual can be downloaded here:
You can also dig here:
Answer from Ildar Babamuradov[guru]
If your PBX does not support tone mode, then no matter how you turn it on, you will still hear pulse dial clicks in the handset as if you are spinning a disk
Answer from Maxim Bogdanov[newbie]
In one of the office phones, group interception stopped working, as it turned out, the problem was that the phone was in a pulsed mode.
Panasonic KX-TS2365RUW phone - by default, the phone is in pulse dialing mode. I'm looking for a switch on the side of the tone mode. I don't have a lever. Pressing the asterisk button (tone) switches to tone dialing only temporarily, and after you hang up, the phone will go back to pulse by default.
To switch this phone to tone dialing, you need:
1. Press the PROGRAM button.
2. Press the MUTE button.
3. Press button 3.
4. Press the "1" button to select "TONE". To select "PULSE" press button "2".
5. Press the PROGRAM button.
At the same time, it should be taken into account that the phone must have batteries, otherwise the settings will not be saved and will be discarded again after you hang up.
on Sep 13, 2018 1,331 Views
Often when contacting support or calling hotline the subscriber is urged to switch to tone dialing. Typically, this happens when you try to call a multiline number that requires you to press numbers on the handset to confirm your selection. Understanding such nuances is not difficult even for a beginner.
Telephone communication is a complicated thing, but at the same time, it is extremely interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies go far ahead every year, and even now modern devices support only the tone type. For devices released earlier, you still have to make the transition between two:
Related articles How to choose a portable speaker How to restore your phone battery at home Lawn grills
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, which uses an analog signal to dial the desired combination of numbers.
A user who is not versed in the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices, released even 10-15 years ago, still have the ability to switch to a pulsed mode. The other input method will give itself out as a difference in the height of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse is primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of the outdated pulse dialing looks quite logical. Feature-rich office phones like Avaya's don't even have a mode change feature. This is understandable, since in large firms work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you wonder how to turn on tone mode on your phone. For example, the list of characteristics of the wired model of the Panasonic device says that both options are available. In some cases, pressing buttons is not enough to navigate between them, and you should contact your telecommunications company for help. It is a mistake to assume that absolutely all radiotelephones, unlike wired ones, have only tone dialing. Voxtel Select series devices support both methods of transferring a telephone number.
Tone mode on mobile phone
Calls to long-distance hotlines, where you have to listen to an answering machine for a long time, are more profitable to make from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the extension of the desired operator, you will need to press the keys with certain numbers, which is possible only with the tone option. The person dialing the call center will hear a characteristic signal, which means that the connection has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for stationary devices, and the modernization of Russian automatic telephone exchanges made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to turn on desired type connection disconnected for some reason. Without enabling this function, some devices will not allow you to dial a number.
How to put your mobile phone into tone mode
If you answer this question in a generalized way and in relation to each gadget, but the answer here is the same - no way! By default, all phones support and work in tone mode and there are no other options for choosing. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone. This guide explains how to switch to tone mode on a touch-enabled mobile:
- Dial a phone number.
- Once the connection is established, call up the on-screen keyboard.
- Press the star or plus key. For various models gadgets may need to hold these buttons for a while.
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you do not need to open the keyboard on the screen. Having reached the dialed number and having heard a request to turn on the tone input, which was probably turned off, you only need to press and hold one of the keys (usually it is an asterisk, a hash sign or a plus sign) until a characteristic signal.
Transferring a landline phone to tone mode
The internal design of home communication devices, like telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to switch the phone to tone mode in the classic way is described in the following instructions:
- Pick up the handset of the telephone if you have a wired one, or press the call key on the radiotelephone.
- Hold down the star button for a second.
- Try pressing the number keys: if they make sounds that are different in tone, then everything is done correctly.
Another option is only suitable for some models:
- Inspect the tube from all sides for the location of additional levers on it.
- If you notice a switch with the Latin letters P and T, meaning pulse and tone dialing, then move the lever to position T.
- You can check by pressing the number buttons.
Video: tone mode
How to put the phone in tone mode - what is it. Switching to tone mode on the phone - high-tech news on the site "
Reviews and articles about new products in the categories: auto, business and analytics, video games, gadgets, hardware, energy puzzles, sound and acoustics, game consoles, internet, research, cameras, computers, space, medicine, multimedia, navigation, science, laptops , game reviews, weapons, special opinion, peripherals, tablets, press releases, entertainment, advertising, robots, rumors, software, TVs, phones, technology, it's interesting.
Everything that interests people close to science and technology, as well as those who receive the fruits of the first two in the form of useful devices and gadgets, we collect here and lay out in an accessible form. If you want to know how the Universe was formed or which smartphone will satisfy all your needs - come in and stay up to date. Every day, the most interesting reading material appears on the site, news and stories from the world of the virtual network, technology, space, cars are collected and analyzed - everything that makes the planet rotate and the imagination work. It is enough to start reading any of the articles, and it is proved: you will read it!
Many companies, be it a mobile operator or big internet store, today they offer to use a convenient menu when calling by pressing the dialing keys. For example, do you want to buy a product? Press unit. Consult with a specialist? Press deuce. Etc. When calling, you can usually hear that the phone must be switched to tone or tone (they are one and the same) mode. How to do it?
Dual-Tone Multi-Frequency, DTMF, or tone dialing is a two-tone multi-frequency analog signal used to dial a telephone number. Many PBXs can receive a phone number in tone, but only if the PBX has been replaced with a digital one. Other PBXs are able to receive a telephone number only in pulse mode. Pulse mode - a method of dialing a telephone number, in which the digits of the dialed number are transmitted to the PBX by sequentially closing and opening the telephone line, and the number of pulses corresponds to the transmitted number, while the digit 0 is transmitted in ten pulses.
As for our main question, everything is very, very simple here. Let's say that when you call, you are told to put your phone on tone mode by pressing an asterisk. If you are making a call from your smartphone, do not press anything, as the tone mode is the default in this case. This applies to any smartphone, including the iPhone:
Or let's say Xiaomi:
And even if you click on the same star, nothing will happen.
As for landlines, the situation is different. To switch to tone mode from pulse, it is usually recommended to click on the asterisk icon (*). Pay attention to the image of the Panasonic phone, where Tone is clearly visible under the asterisk, which indicates that you need to press this particular button.
Some phone models have separate buttons, for example, T or P. And some modern landline phones do not have tone mode support at all. In fairness, we note that such models are rare.
There are times when a subscriber calls various services or a hotline and hears an answering machine offer, which advises you to switch your phone to tone mode. But not all users are aware of how to complete this process. The article will give useful information for those people who do not know how to switch the phone to tone mode.
Dial modes
The main operating modes of dialing a telephone number are divided into pulse and tone. These systems are the fruit of the development of communication. An earlier form of functioning of the telephone set includes a pulsed mode. Dialing with it is carried out by interrupting the line with a certain list of sounds. Any subscriber will surely remember his calls from a regular phone to another city on a long-distance line.
The tone mode is a later invention and it appeared relatively recently. Its main difference from the impulse one is that a deliberately selected sound is intended for each digit. Attention should be paid to the fact that all modern models telephone sets are produced taking into account the use of this feature. The pulsed mode for such models is a thing of the distant past. But, despite such an innovative approach, still phones with classic features are popular to this day. Therefore, if you need to switch to tone mode, you should clarify whether the menu of your device suggests it.
Examination
To find out if the desired function is enabled, pick up the handset of the phone and press any key. You must determine what kind of sounds are coming from your machine. If short beeps are heard, this indicates that your phone has been switched to the tone mode system.
If it is possible to recognize sounds similar to clicks, then the device undoubtedly works in a pulsed mode. The last option limits a number of functions. How to transfer the phone to the tone mode we need, we will discuss further.
Process
Press the "*" button on your device - this is the easiest way to switch your device to tone mode. This method is only effective if the menu provides such a function. Not every phone model involves a simple button press. Hold and hold the "*" or "#" key for a few seconds. The word “tone” or “t” should appear on the scoreboard of your phone. If the display shows absolutely nothing, then you should again listen to the sounds made by the handset while pressing the buttons. Some models are equipped with special keys "T" or "P", which are located on the body. They were created to transfer the radiotelephone from pulse mode to tone mode.
There are other individual actions for such a setting. They are specific to some models. The switching method can be a combination of buttons "*" and "-" or "-", "*", "-".
Nothing came up
If none of the above methods of switching to the tone mode of the phone does not work, then it is recommended to refer to a detailed study of the menu of your device. Many models are subject to translation through it. Enter the settings and refer to the "Switch between modes" option. Select the way you want to work and confirm your action.
We have dealt with the concept of tone mode, but in the end, we should tell a little more about the pulse mode. First of all, this is how phones with a rotary dialer work. Pulse mode is a dialing method by which digits are transmitted to the station by stepwise closing, and then opening the selected telephone line.
Often, when contacting the support service or calling the hotline, the subscriber is strongly prompted to switch to tone mode, for example, when dialing the subscriber's extension number. Most often this happens when trying to call a multiline number that involves pressing numbers on the handset to confirm the selection. Understanding such nuances is not difficult even for a beginner.
What is phone tone mode
Telephone communication is a complicated thing, but at the same time, it is extremely interesting. For this reason, before switching the phone to tone mode, it is worth understanding its essence and considering what other dialing options are available. Telecommunication technologies go far ahead every year, and even now modern devices support only the tone type. For devices released earlier, you still have to make the transition between two:
- pulse, which involves closing the telephone line in a special way, where each dialed digit corresponds to the number of pulses.
- tone, which uses an analog signal to dial the desired combination of numbers.
A user who is not versed in the intricacies of this topic will be able to distinguish these methods of entering numbers by ear. Remember the old rotary phones: when you scrolled the disk, you heard some clicks that differed depending on the number. Some devices, released even 10-15 years ago, still have the ability to switch to a pulsed mode. The other input method will give itself out as a difference in the height of the signal, which will depend on the key pressed. The advantage of tone digital input over pulse is primarily in the speed of dialing and connecting with the subscriber.
Tone mode on a landline phone
With the passage of time and the development of internal telephone networks, the abandonment of the outdated pulse dialing looks quite logical. Feature-rich office phones like Avaya's don't even have a mode change feature. This is understandable, since in large firms work is constantly in full swing, and the speed of dialing to a client or partner is important.
Home devices will make you wonder how to turn on tone mode on your phone. For example, the specification list for Panasonic's wired model states that both options are available. In some cases, pressing buttons is not enough to navigate between them, and you should contact your telecommunications company for help. It is a mistake to assume that absolutely all radiotelephones, unlike wired ones, have only tone dialing. Voxtel Select series devices support both methods of transferring a telephone number.
Tone mode on mobile phone
Calls to long-distance hotlines, where you have to listen to an answering machine for a long time, are more profitable to make from a mobile phone. Most devices are equipped with only one input method, so the question of how to switch a cell phone to tone mode does not arise. To switch to the extension of the desired operator, you will need to press the keys with certain numbers, which is possible only with the tone option. The person dialing the call center will hear a characteristic signal, which means that the connection has been established with the selected operator.
There has never been a pulse connection on mobile phones, since this is a feature of telephone networks for stationary devices, and the modernization of Russian automatic telephone exchanges made it possible to abandon this option forever. However, it may not be necessary to switch between input methods, but to turn on the desired type of connection, turned off for some reason. Without enabling this function, some devices will not allow you to dial a number.
How to put your mobile phone into tone mode
If you answer this question in a generalized way and in relation to each gadget, but there is only one answer - no way! By default, all phones support and work in tone mode and there are no other options for choosing. However, there are exceptions to the rules: you cannot transfer to another set, but you can simply turn off the existing tone. This manual explains how to switch to tone mode on mobile smartphone with touch control:
- Dial a phone number.
- Once the connection is established, call up the on-screen keyboard.
- Press the star or plus key. For various gadget models, you may need to hold these buttons for a while.
This algorithm will also be effective for owners of push-button phone models. Here the situation is even somewhat simpler: you do not need to open the keyboard on the screen. Having reached the dialed number and having heard a request to turn on the tone input, which was probably turned off, you only need to press and hold one of the keys (usually it is an asterisk, a hash sign or a plus sign) until a characteristic signal.
Transferring a landline phone to tone mode
The internal structure of home urban communication devices, as well as telephone lines, determines the choice of mode change method. In most cases, this can be done without leaving the apartment or private house. How to switch the phone to tone mode in the classic way is described in the following instructions.