Do-it-yourself plumbing installation of a toilet bowl. Tricks when installing a toilet that will make installation much easier. Connection specifics without corrugation

Greetings, my dear readers.

And the topic of this article: "?".

Make a replacement plumbing equipment in the bathroom at first glance may seem like a simple task. However, to perform these types of work, certain nuances must be taken into account. When installing one of the main elements of the toilet room - the toilet, it is necessary to take into account a number of process features from selection and acquisition to proper installation and connection.

With certain knowledge and skills, as well as with the necessary set of tools, installation work can be done on your own.

Usually, flooring decorated in the toilet room ceramic tiles, a modern models toilets in the base have 4 holes through which bolts are attached. Therefore, the installation will require the following set of tools and materials:

• drill
• drill bit with pobedite tip
• a hammer
• wrench suitable for fixing bolts
• marker
• plastic bushings
• connecting corrugation or plastic corners

So, friends, before you proceed directly to the installation of the product - you need to buy it. How to choose a good and high-quality toilet - read.

Which underfloor toilet is better to choose?

Plumbing hardware stores offer a wide selection various models from many manufacturers.

IT'S IMPORTANT TO KNOW:

Before purchasing, it is necessary to conduct a visual analysis of the product for the presence of chips and cracks, pay attention to the coating of the product. It must be even.

Next, you should check the completeness. The package should contain documentation - installation instructions and a product passport, which state what is included in the toilet bowl. Then check the presence of all elements, including fasteners.

When choosing a toilet bowl, it is also recommended to pay attention to the method of water supply. In the case of connection from below, the liquid intake will pass more quietly. The aesthetic appearance of the room as a whole will not be spoiled by pipes protruding from the side (in the case of a lateral supply).

By the type of connection to sewer drains, this plumbing equipment is different, so before going to the store, you should pay attention to where the sewer pipe comes out (from the wall or from the floor), as well as the angle of the pipe. This information will help to avoid additional costs for the purchase of adapters, and the connection will look more aesthetic.

Types of floor toilets

There are two types of toilet bowl: and floor. The most common model is the floor toilet, which has several advantages:

• a wide range of manufacturers
• more familiar model for most people
• availability of budget options
• installation does not require much preparatory work

When choosing an irreplaceable thing for a bathroom, you should pay attention to the type of sanitary bowl.

According to their structure, they can be divided into three types:

• poppet

The main advantage is the design feature of this type of bowl. One of the walls has a protruding part. This structure allows you to avoid splashing during rinsing, but odor may occur during use.

• Kozyrkovaya

In this model, the structure of the rear wall is made with a slope. This type does not splash during flushing, and also prevents the appearance of bad smell during operation. This type of bowl requires careful care, using special brushes.

• funnel-shaped

When flushing, there are small splashes, but the shape of such a bowl is the most hygienic and does not require special care. Imported manufacturers most often produce models of this type.

In the plumbing store, toilet bowls with various drain barrels are presented, which differ in design and installation method.

The types of drain barrels include:

• compact

- is the most common model. This view is mounted on a ledge behind the toilet. Between the elements there is a rubber gasket. Installation is carried out using the screws included in the kit. Some companies also produce models with a one-piece construction of a barrel and a toilet bowl.

• separate

This model is perfect for a small bathroom. Allows you to save space, due to the lack of a rear ledge for a drain barrel. In this case, the barrel is mounted on the wall and connected to the toilet using pipes and hoses. This type provides a better flush, since the water pressure has more pressure.

• concealed installation system

the drain barrel is located inside the false - walls. Flushing is carried out using a button that goes out. If necessary, dismantling, together with the button, you can replace the internal components of the tank.

Ways to drain floor-standing toilets can also vary. Among the presented range there are lever and push buttons. The second option includes more modern models. There are types with two buttons. When you press one, half of the water contained in the tank is flushed, two buttons - respectively, the entire volume of liquid. This option allows you to save water consumption and reduce the payment for the supplied resource.

The material used to make

When choosing a sanitary ware, you should pay attention to the material used for its manufacture. Porcelain and faience are widely used. These ceramic materials differ in the firing method. Thus, faience has a greater porosity, due to which dirt is absorbed and, as a result, the color of the product changes during operation.

Stainless steel models are usually used in in public places and have anti-shock and anti-vandal properties.

The plastic version is lightweight, does not require special care, but is not durable and more fragile than its counterparts.

The most expensive models made of glass and precious metals. Glass products can only be found from certain manufacturers. Plumbing equipment made of precious metals is made to order.

Toilets by type of connection to the sewer

One of important aspects, which builds to pay attention to is the type of connection to the sewer system. Equipment can be connected according to the outlet of drains in the design of the toilet bowl:

• horizontally
• vertically
• obliquely

A universal option can be called a horizontal connection. In this case, the branch pipe can be connected both to a pipe coming out from below (from the floor) and from the side (from the wall).

If the sewer pipe is removed from the floor, then you can safely give preference to the second - the vertical method. This type allows you to save space in the room.

In the case of a pipe located very close to the wall, but at the same time it comes out of the floor, it is possible to carry out diagonal connection- inclined type of drains.

How to install a floor toilet with your own hands - video

Installation of a floor-standing toilet - step by step instructions

If it was decided to install the floor toilet without the involvement of a specialist, then this task should be taken seriously. All work is carried out in protective gloves, a mask to protect the respiratory organs, goggles to prevent fragments from getting into the eyes. A rag is being prepared to remove unwanted liquid, a bucket.

• Step 1 - dismantling

Work is underway to dismantle the old toilet bowl. First you need to turn off the water supply. Close the tap of the central riser, if there is an individual one for the toilet, then it will be enough to block it. Drain the water from the barrel. For high-quality removal of the toilet bowl, without damaging its integrity, free access is provided from all sides.

The water supply hose is unscrewed, the corrugation is disconnected or plastic corner connecting the toilet to the sewer.

In case of installation on anchor bolts, unscrew the fasteners with a wrench and dismantle the equipment. If the toilet was glued to the base, then you will need a chisel, a hammer, in some cases a puncher.

• Step 2 - preparing the base

The basis for the installation of new equipment is being prepared if it was damaged during dismantling.

• Step 3 - preparing the base

The next step is to install a new plumbing product.After checking the product for integrity, according to the attached instructions, the equipment is assembled. To protect against leaks, it is recommended that the connecting elements be additionally sealed in places of rubber gaskets silicone sealant and leave until completely dry.

IT'S IMPORTANT TO KNOW:

If pipes for a water-heated floor are laid under the floor covering, then, in order to avoid negative consequences, at this stage it is necessary to know for sure that the heating element line does not pass at the drilling site.

We drill holes with a drill. For easier drilling, the place of contact between the drill and the tile is wetted with water. This facilitates the process, eliminates damage to the drill and reduces the load on the drill.

Plastic bushings are inserted into the finished holes and hammered. The toilet is installed.

Further, the product is screwed to the floor with the bolts included in the kit. Using the key, the fastening is tightened. Stability is checked. Fasteners are hidden by decorative plugs in the color of the toilet bowl. The gaps between the floor and the toilet are filled with sealant.

Using a flexible plumbing hose to supply water, the toilet is connected to the water supply. Special corrugation or plastic corners of various bends for connecting toilet bowls, equipment and sewerage are connected.

After complete installation, check for leaks. The water supply is opened, the drain barrel is filled and the liquid is drained. If no leaks are found, the toilet is ready for use.

Conclusion

Well, that's all, my dear readers. I hope I was able to answer the question in this article - how to install a floor standing toilet.

If you started a major overhaul of the bathroom, or the plumbing is out of order, then you may need to replace the toilet. This process has a number of features that must be taken into account, and the approach to choosing a new toilet must also be correct.

Of course, you can call a plumber from the housing office, or turn to private craftsmen who will provide professional installation. But installing a toilet bowl with your own hands will not only save you money, but also allow you to understand the whole process, which means choosing the most suitable installation option.

In this article, we'll walk you through everything you need to repair your toilet to help you do it yourself.

The first thing to decide: which toilet to choose

Replacing a toilet bowl in its entirety is part of a comprehensive one, so it includes:

• selection of a new toilet bowl, taking into account the methods of fastening and draining;
• dismantling the old toilet;
• repair of the toilet room, including the replacement of pipes, screeds, cladding and other things;
• installation and connection of a new toilet bowl.

Buy new toilet follows in advance, and at the same time you need to consider some features that will help you make the right choice.

Floor toilet bowls are divided according to their design into several types. Their differences are based on the shape of the main nodes.

1. The shape of the outlet drain can be horizontal, vertical or oblique, at an angle of 45 degrees.
2. The toilet bowl can be visor, dish-shaped or funnel-shaped.
3. The models also differ in the type of cistern: it can be combined with the base of the toilet bowl or mounted on the wall, and at different heights.
4. The fixings of the toilet bowl to the floor are different. This can be a variant with two or four fixing points, or a design in which the toilet is installed on special corners attached to the floor.

Tip: choose a toilet based on the type of drain. If you are not going to change sewer pipe, then take a model with the same type of drain as the old toilet. No adapters will provide a high-quality connection of a toilet bowl with a vertical and direct outlet.

The method of connecting the tank will determine the types of further facing work in the toilet room. For example, if you chose to mount to the wall, then you will need a prepared place and anchors for installation.

1. First of all, the water supply inside the drain tank is blocked, the water is drained from it and the underwater hose is unscrewed. After that, the tank fasteners are unscrewed. If they are rusted or covered with lime deposits, hold the bolt head with a screwdriver and unscrew the nut with an adjustable wrench. Use kerosene or aerosol lubricant - these products greatly soften rust and lime deposits.
2. After the tank is removed, unscrew the fasteners that hold the toilet - dowels or nuts screwed onto the anchor.
3. Now you need to disconnect the drain from the sewer pipe. If your house is old building, then most likely the drain will be fixed. In this case, you will need a hammer and chisel. Position the chisel across the paste and carefully prick the cement in two places. Rock the toilet with force so that the drain turns and loosens. Tilt the toilet without removing it so that the remaining water drains out of it.
4. After the dismantling of the toilet bowl is completed, close the hole in the sewer pipe with a wooden plug or a cloth stopper.

Dismantling the toilet does not require special care, because it is unlikely that you will reuse the product. Therefore, if the cement coating is too strong, you can beat off part of the toilet bowl with a sledgehammer to facilitate work, and then make a transverse hole in the pipe, insert a metal rod there as a lever, so that it is easier to loosen the drain.

For your information: if you have installed drain pipes made of cast iron, it is better to immediately replace them with plastic ones. Exploitation PVC pipes much easier, both for the initial wiring and for connecting all drain points.

DIY toilet installation process

After you have dismantled the old toilet or done all the finishing work, prepare the surface, level it and proceed with the installation of the toilet bowl.

1. Attach a rigid pipe or corrugated pipe to the toilet drain for articulation with the sewer outlet pipe. The best option would be in which the toilet drain goes directly into the pipe outlet. Use a rubber seal with a border for this. Do not seal the drain transition to the sewer inlet with cement.
2. Prepare the water inlet. Good for this flexible hose, screwed onto the entrance to the tank and the water supply tap. Pay Special attention on the diameter of the hose fittings at both ends.
3. After the connection is made, you can fix the toilet on the wall or floor. Below we will look at this process in more detail.
4. Assemble the toilet. On the base, previously fixed, install the tank. If your tank is suspended, fix it to the wall and run a pipe. Now you can check whether the settings of the tank are correct and the toilet is functional. Turn on cold water wait until the tank is full. While the water is being collected, you can adjust its level. You can find out more about this in the instructions for the tank.
5. The last step is to attach the toilet seat. There are holes on the top of the toilet bowl for mounting it, and the necessary parts are supplied in the kit.

Now we will consider in more detail the methods of attaching the toilet bowl, as well as the features of each of them.

How to properly install the toilet, taking into account any little things

Usually there are three options by which the toilet is attached to the floor:

• installation with anchors cast into the screed or dowel;
• fixing the toilet with screws on a wooden base, pre-mounted in the screed;
• epoxy resin installation.

If you decide to change the toilet due to overhaul, then the best option would be anchor fastening or prepared wooden base. In this case, the anchors for attaching the toilet bowl are placed on the floor when forming the screed. You should install them so that they protrude 5-6 cm above the surface. The excess can then be cut off.

Match the taffeta (wooden board) to the size of the toilet base. Over its entire surface, hammer nails in a checkerboard pattern so that they protrude on the other side. Now turn the taffeta over and place it where the toilet will be. Fill the screed with concrete along the top edge of the board, install the toilet and secure it carefully with screws.

There are also certain rules for attaching a toilet bowl to a tiled surface. Be sure to wear rubber gaskets under the nuts and dowels: they will not allow the toilet to crack when tightened and prevent rusty drips on ceramics. Use nickel-plated anchors and bolts, they are easy to unwind even after the service life has expired.

Tip: installing the toilet on to prevent damage to it appearance, use epoxy resin or dowels.

Under the dowels, you will need to make holes through the screed and tile into which the screws will be screwed. The holes should not be too deep so as not to touch the waterproofing layer. If the screed is too thin, pour some sealant into the hole before installing the dowel. Be sure to put a rubber gasket on the screw. It is best to place the toilet on a cushion of sealant, and then press down with screws.

What other toilet installation options are there?

When installing a toilet, you can completely do without such details as anchors, dowels and screws. Epoxy resin will come to your rescue. The main thing is to prepare the base of the toilet bowl and the floor surface in accordance with all the rules. This option is optimal if the tank is mounted on the wall, since it is he who represents half the weight of the complete structure.

1. Start by sanding or abrasive stone on the surface of the floor, so that subsequently the epoxy resin is well seized and held.
2. Apply the adhesive to the floor and base of the toilet in an even layer of a few millimeters. Install the structure, align it and wait for the resin to dry completely.

Recently, hanging toilets have become popular. They are installed on the wall, without any contact with the floor. For installation, you will need to make a metal frame and attach it to bearing wall, and fix the toilet directly on it if you plan to hide the pipes and the tank behind a plasterboard wall.

You can also mount a hanging toilet with an open-type cistern directly to the wall, but in this case, you will need to transfer the sewer pipe into the thickness of the wall. The structure is fixed by using anchors built into the frame or wall.

DIY toilet installation video

Getting familiar with the process self-assembly toilet, you can easily determine how much money you managed to save without involving a plumber or a private master. We are always happy to help you in any endeavors. In the comments, you can leave your questions, comments and examples from your own experience. Comfort to your home!

Installation of plumbing equipment is carried out in strict accordance with building regulations and norms. Home craftsmen often experience fear of such work. This is used by service companies that request very decent money for performing fairly simple operations. Meanwhile, fixing the toilet bowl to the floor is an activity that is quite affordable for independent implementation. It is only important to carefully read the existing work technologies, choose the most suitable one, and follow all the instructions exactly.

Regardless of the chosen method of attaching the toilet bowl, installation work begins with the assembly of the cistern. The device is assembled in accordance with the instructions and fixed in place intended for it. Also, before installing the toilet, the units for supplying and discharging water must be prepared. There are several methods for attaching devices. The main selection criterion is the floor material on which the equipment will be installed. Let's take a closer look at the most common methods.

Method number 1: installation on dowels

The most practical method that allows you to install the device with the least effort and time. It is optimal for use on a flat, smooth surface, since the slightest height difference adversely affects the quality of the flush. It is preferable to use this method of fastening for lightweight compact structures, since the fixation may not be entirely reliable. Plumbers advise installing equipment on a special gasket, which you can easily make yourself from old linoleum or a sheet of thin rubber. The toilet bowl is installed on the workpiece, circled around the contour with a marker. After that, with a sharp knife or just scissors, the gasket of the desired shape is cut out.

The device is fixed to the floor with dowels or special plumbing fasteners. Fasteners usually come with new equipment. It can also be purchased from specialized stores.

Now we need to markup. We “try on” the toilet bowl on the place prepared for the equipment and draw it around the contour. We remove the device. We apply a thin layer of sealant and glue the gasket on it. This design will be the most reliable, although some masters prefer to do without a substrate at all. You can start drilling holes for fasteners. As practice shows, if you glue the gasket with high quality and choose the diameter of the drill so that the holes for the fasteners are slightly larger than it, then further installation will be much easier. This is due to the fact that the rubber backing acts as a kind of "contact spot" for the floor and the device.

It happens that it is required not only to fix the toilet bowl to the floor, but also to raise it a little. This is true if there are several devices in the apartment. Then the last one in the system needs to be raised by about 3-4 cm. In this case, a piece of a two-inch board is used, which is used as a stand. It is cut exactly along the contour of the toilet and placed on the floor, a rubber substrate is placed on top of it. All this is sealed with a sealant and forms a reliable and durable structure. Holes for fasteners are drilled directly on the gasket.

Tighten the mount on the base of the toilet very carefully. Excessive force can damage the ceramics from which the device is made.

As fasteners, you can use long metal dowels or special plumbing fixtures. The latter usually come with new equipment. The quality of fixing they have is about the same, so you can use both options. We drive dowels into the holes prepared in the floor. We install the toilet and carefully screw it. It must be remembered that excessively strong tightening of the ceramic from which the device is made can be damaged.

Now you need to connect the device to the sewer. At this stage, we pay special attention to the corrugation. We generously lubricate both its edges with silicone. We insert one of them into the sewer socket, and put the second on the toilet outlet. All parts of the connection should be carefully pressed with your fingers so that the sealing is of high quality. As an additional measure, you can use metallized tape, which can be used to seal the joints. We connect the water supply and the device is ready for operation. There is a similar mounting method, which is presented in detail in the video.

Method number 2: mounting on glue

Of all the methods for fixing a toilet to the floor, this one is the easiest, but also the most time consuming. For the curing of the epoxy mixture, which is used as an adhesive, it takes about 12-15 hours. This method can only be used on a smooth surface. Most often it is used to fix equipment on floor tiles. The method is very easy to perform. First, both surfaces to be bonded must be well cleaned of dust and debris. floor tiles can be sanded to make it rougher. This will improve the adhesion of the material. Surfaces are degreased with any solvent or acetone.

Preparing glue. You can buy ready-made epoxy or make your own. For this you need to take 100 parts epoxy resin ED-6, 200 parts of cement, 20 parts of solvent or plasticizer and 35 parts of hardener. The order in which the components are added to the solution is important. First, the resin is heated to 50C, a solvent is added to it, then a hardener, and at the very end - cement. The composition must be constantly stirred to form a plastic, homogeneous mass.

In order for the toilet to be securely fixed in place, the floor covering is prepared: cleaned for better adhesion and lubricated with a small layer of glue. Excess composition, speaking under the weight of the equipment, is immediately removed with a damp cloth.

Properly prepared adhesive mixture can be used within one and a half hours. We apply it to the base of the toilet bowl so that the solution covers an area of ​​at least 20 square meters. cm, and the layer thickness was at least 4 mm. We install the prepared equipment in the right place, combining the sewer socket with the outlet, and press it to the floor with force. After that, the device is left for at least 12 hours. This period is necessary for the curing of the adhesive composition. During this time, it is not recommended to even touch the toilet. Then we connect the equipment to the water supply and sewerage.

Method number 3: taffeta mount

Most often, this method is used to install toilets on a wooden floor. Taffeta is a pad of durable wood to which equipment is attached. The thickness of the board from which the element is cut, corresponding to the shape of the toilet support rack, should be 28-32 mm. To protect the part from dampness, it must be carefully treated with drying oil. For reliable fixing to the floor from the bottom of the taffeta, an anchor is mounted. The simplest option is nails driven in a checkerboard pattern, which should protrude 2-3 cm from the part. The recess prepared for installing the toilet is poured cement mortar. Taffeta is sunk down into it with anchors. As a result, it should be flush with the floor.

After approximately 12 hours, during which the mortar is completely dry, you can proceed to fixing the equipment. The device is fixed with screws. Rubber washers must be placed under their heads, which will prevent possible damage to the toilet frame when tightened. Experts advise lubricating the screws with grease or graphite before work, so that later, if necessary, they can be easily unscrewed. Wood taffeta can be replaced with a rubber backing. It is cut from sheet material 5 to 15 mm thick, possibly even from an old rubber mat. Such a substrate should be 1-2 cm smaller than the toilet support column.

Mounting the toilet on taffeta involves the use of a special wooden insert. The diagram shows all the elements of such a mount.

There are various ways to attach a standard toilet bowl to the floor. They differ significantly in complexity and time spent on installation work. It is important to choose the right fastening method. It depends on the material from which the floor is made in the room. Installation work can be carried out independently, but if there is no experience or desire, it is better to turn to professionals. They will quickly and competently carry out all the work, guaranteeing a long and flawless service of the new equipment.

• Toilet installation - 2309 craftsmen to the site
• 31613 repairman reviews
• Installation of a toilet bowl in Moscow from 1500 rubles / piece.

The toilet bowl is an integral plumbing fixture in any apartment, as well as in many private homes. The need to replace it is a common occurrence, the cause may be a breakdown that does not allow repair, a desire to update the interior of the bathroom. You can change the faience product yourself, it will take time and some skills in the field of plumbing installation. But if you want all the work to be done as quickly and efficiently as possible, it’s easier to turn to a professional. One question remains - where to find a conscientious master who is ready to install a new plumbing fixture at an affordable cost? Here you can not only find contacts of a specialist, but also study advantageous offers at a price.
A competent craftsman will foresee all possible nuances and will install a turnkey product of any system - with oblique or direct outlet, suspended or floor, with various types flush, conventional or compact cistern. In work, it is important to correctly place the rack located inside the structure; it is she who is responsible for stopping the water supply after filling the tank, securely fasten the screws and connect flexible eyeliner to water pipes. Installing a toilet is a responsible matter, so do not trust it to amateurs and do not do it yourself without the necessary skills. How much does it cost to install or replace a plumbing fixture? It all depends on the type of fixation, the need to dismantle old equipment. The final verdict is made by the performer after inspecting the object.

1.
2.
3.
4.

When a property owner decides to change plumbing, he will not be hindered by knowing how to properly install a toilet in a private house or apartment. The work of dismantling and installing a new plumbing fixture requires special responsibility, since the slightest omission can lead to big troubles - leaks and, as a result, flooding of one's own home and neighbors' apartments.

What you need to know when buying a toilet

The main criteria that you should pay attention to when choosing a plumbing fixture are not only its model, brand and color, but also the dimensions (for more details: "What are the sizes of the toilet bowl - standard dimensions, options"). It is necessary to measure the distance from the sewer drain to the door to the toilet room before buying a toilet, and the result must be divided by 2. The result will be
the maximum size of the device that can be installed in this room.

The color and shape of the toilet bowl is chosen in accordance with the interior solution of the toilet room, it should match the design to the maximum. When purchasing plumbing, they certainly check its integrity and completeness. The existing mechanisms in it should work easily, without making creaking sounds.

Materials and tools for installing a toilet

When is produced correct installation do-it-yourself toilet bowl, use the following materials and tools:

• perforator or impact drill;
• marker or pencil;
• wrench;
• drills (drills) for metal by 8 or 10 millimeters, depending on the diameter of the dowels with which the device will be attached to the floor;
• a hammer;
• drills by tiles if the floor covering is finished with it;
• spanners;
• silicate sealant;
• Phillips screwdrivers;
• masking tape;
• rubber cuff measuring 123x100 millimeters (required when attaching the toilet bowl to a cast-iron socket);
• flexible water supply (when replacing the old one);
• cuff - depending on the toilet, a straight, flexible or eccentric is selected;
• kit for fastening the plumbing fixture to the base. See also: "Do-it-yourself toilet installation - detailed instructions for different types of toilet bowls".

Toilet installation rules

The fastest and in a simple way to connect the toilet to the sewer pipe is considered to be the use of a corrugated cuff. But at the same time, it is not possible to place the device as close as possible to the pipe socket. You need to know how to put corrugation on the toiletso that everything works without leaks. This circumstance is important when the toilet room is small.

When the toilet outlet and the sewer socket are located on the same axis, experts recommend using a straight cuff, but if on different axes, an eccentric cuff, such as in the photo.

The rules for installing a toilet bowl suggest that when purchasing a flexible water supply, its length is taken into account, which should be equal to the distance from the connection point of the filling mechanism to the cold water pipeline. To this value add 15-20 centimeters.

It is necessary to pay attention to the thread diameter (1/2 or 3/8 inch) and the type of connection (external/internal). Also, do not forget about buying a fum tape. In the process of dismantling the toilet, the remaining water may pour out of it, so the presence of a floor cloth will not be superfluous.

Technology and stages of installation of the toilet

The toilet installation procedure includes the work of dismantling the old plumbing fixture. Before that, turn off the water and disconnect the flexible hose. Then, without fail, the water is drained from the device and the drain tank is disconnected. If necessary, you can use a hammer if the plumbing fixture is no longer useful. In this case, you need to be careful with the fragments, as they can get into the sewer pipe and cause a blockage.

After removing the water from the bowl, they begin to clean the socket of the cast-iron sewer. Rust, remnants of old sealant, dirt are removed from it. Then the transition cuff (123x110 mm) is lubricated with sealant and placed in a cast-iron socket.

In the case when, after dismantling the old device, under it is visible wooden plank, it is removed, and the resulting cavity is filled with cement mortar, which is leveled with a spatula relative to the floor level and allowed to dry for 20-30 minutes.

To mark holes for attaching plumbing to the floor with dowels, they take the device and the eccentric cuff and temporarily place it in the place where it will be located. Further, the toilet installation technology provides for marking the holes with a marker or pencil. When the holes are at an angle, then you need to drill them at an angle, and then insert dowels of the appropriate size into them.

Install the fittings of the drain tank, as they interpret the rules for installing the toilet bowl and the instructions (it must be included in the kit). Plastic nuts should be tightened by hand and very carefully so as not to damage the gasket and not overtighten the dowel. It is necessary that the moving elements of the valve mechanism do not come into contact with the walls of the tank. The gasket is treated with a sealant.

The eccentric cuff is inserted into the adapter cuff with the petal part and fixed to the sealant in the cast-iron socket. The outlet of the bowl is inserted to the very base into the eccentric cuff, having previously treated it with a sealant. The fastenings of the holes must match, for which the cuff should be rotated carefully and evenly. Further, the main thing is not to overtighten the bowl to the floor, using screws and plastic washers.

It will help to properly mount the plumbing installation diagram of the toilet. On the next step the bowl is placed on the drain tank. But before that, the gasket is attached to the bowl with a sealant. The tank is carefully fixed, preventing the gasket from moving.

Then the screws are evenly tightened, the lid, the seat, the flush mechanism, and the plumbing to the toilet are installed in the correct sequence. Produce a test flush, if necessary, adjust the mechanism.

If everything is done in accordance with the instructions, there can be no leaks.