The imagination of designers often seems limitless. To create decorative elements, all available materials are used: artificial stones, shells, bottles and even tree branches. With their help, you can make an Easter wreath for the home, panels, artificial bouquets, a frame, a nest, etc. Let us consider in more detail the process of making decor from branches.

Application

Decorative elements from dry branches are suitable for the interior of any room: living room, bedroom, bathroom, hallway, kitchen. This decor gives the room individuality, exclusivity, enlivens the room and beats it in a natural style. You can make decorative elements, be it a frame, a panel, a bouquet, a nest, a sakura branch or an Easter wreath, from branches collected in the forest. You can, of course, cut off fresh branches, pick off rowan leaves from them, and then dry them, but why torture nature once again?

Training

Before creating any artificial elements, be it a panel, a nest, a sakura branch, a bouquet of dried flowers, a frame or a decorative chandelier for the home, you need to preparatory work.Work materials should be cleaned of dirt, leaves, treated with a special protective agent and then paint with varnish, paint or stain.

Wreath

The handmade Easter wreath for the home looks original.

To make such a decorative element, you will need:

• wire of any thickness or wet branches with no leaves;
• brown teip tape;
• foamiran;
• yellow stamens;
• pastel.

An Easter wreath that can be used for interior decoration is made in this sequence.

Pieces of brown tape are wrapped around 14 wires. Depending on what diameter the Easter wreath needs to be made, one (two or three) wires are first twisted together, and then one circle is created. All subsequent wires wrap around the circle, forming the desired width. The ends are connected with a ribbon or hidden in "branches". After the Easter wreath is ready, it must be decorated. For this purpose, decorative flowers or leaves are used.

panel

From rowan branches, you can create not only a bouquet, but also an excellent panel for the home. For these purposes, wooden rods of different lengths and thicknesses are used, on which dry leaves and flowers are attached. The created composition is fixed with a thermal gun. This panel will perfectly decorate the living room, kitchen or bedroom.

framing

A photo frame and mirrors are also made from rowan branches. The algorithm of work is the following. The plastic frame insert or mirror is covered with foil or paper. Then the frame is covered with rowan or sakura branches. These elements are fastened together with glue or wire. In addition to the decor of the branches, you can use stones, shells and beads. This is how a frame is created from rods of mountain ash or sakura.

Vase

A vase with your favorite flowers, entwined with branches, looks amazing on the windowsill of the house. This composition merges with nature. Twigs from which dirt and leaves were previously removed must be fixed to the container with glue or tape. The main thing is not to forget the entwined artificial materials attach varnish.

Advice! Intertwining branches with roses and bright stems look original.

A couple of rowan branches can be inserted directly into a vase. Such an artificial bouquet will be a great addition to any interior.

Nest

In order to weave a nest, you need rods of a well-bent tree. For example, birches. Branches should be damp and should not break when bent. Before starting work, you need to remove the old leaves from them.

To make a nest for a bird, you need to take one rod and bend it into a circle. The next skeins will already be formed around the resulting center. There should also be a jumper in the center, to which the ribs of the nest will be attached.

They must not be an even number. Then it will be possible to weave the branches one on top of the other. To prevent the rods from breaking, they need to be fastened with wire. If on the first attempt the nest turns out to be full of holes, then you can correct the mistake by weaving twigs into these holes.

Screen

From branches, you can create not only a bouquet, but also interior original partitions. The screen will divide the space into zones, and hide defects in the interior of the house. To make it, you will need a pruner to make all the branches of equal length and a rope that will serve as a connecting element. The floor base for the screen should be a wooden stand. Rods will be installed on it, and then fastened together with a rope or wire.

Candlestick

Multi-colored branches of trees, which are included in an artificial bouquet, also decorate a white candlestick. You can attach all the elements to a glass or immerse them in water and complement them with floating candles.

Lamp

Tree rods are decorated lighting and a chandelier. This interior decor will look original in the bedroom. The rods form the base of bedside lamps, a floor lamp or a chandelier. The decorating process is standard. The twigs are attached to the floor lamp and using glue or wire.

Autumn wreath and bottle decor from branches (2 videos)

02/19/2018 6,050 0 Anya

skillful hands

The use of natural materials in the decor of the room always evokes a romantic mood. With this decoration, you can surprise not only your guests, but also create crafts from tree branches with your own hands for a gift to friends and relatives. Moreover, with minimal cost, you will get maximum pleasure both from the process of creating original compositions and from an interesting result.

Content:

Technical features

Beautiful products can only be obtained if you give Special attention the quality of the material. At the height of the summer season, very a large number of various insects eat up the bark of branches, so they need to be harvested in the first month of spring or at the end of October.

After the branches are collected, you need to immediately start drying them in order to avoid deformation of the rod and bark within a month. This will take approximately 7-14 days, provided that room temperature is maintained. Speed ​​up the process by a few days conventional battery if branches are laid out on it.

Processing can be continued by opening the material with varnish or paint of the desired shade. There is a special varnish for wood, but if you can't find one, you can always use clear nail polish, which is relatively easy to get at retail outlets.

Master class: 10 examples of creativity

Just taking branches and immediately creating a masterpiece out of them that fits perfectly into the interior is quite difficult. Therefore, we offer several master classes that will help you analyze in detail the stages of creating a particular craft.

Candlestick from tree branches

Before you start, prepare:

• dried branches;
• low glass;
• glue gun;
• a candle;
• secateurs.

Let's get started:

1. Look for suitable, not very thick branches, wash them and dry them properly, and then give them the same length with pruners.

2. Place a glass in front of you, apply glue to each branch and carefully lean them against the glass, holding them with your hands for about a minute. Glue each subsequent branch close to the previous one.

3. Now it's the turn of the candle. It should not be higher than a glass. The candle must be inserted in the middle and the product is ready.

This is not the only candle option using twigs. The next option is much easier. Only after drying, it is better to immediately paint the branches in a golden or bronze color, and only then use a hot glue gun to fit them around a thick candle.

Photo frame

Such the right thing in any family, like a photo frame, you can make it from dry twigs.

You will need:

• many branches;
• wooden rectangle for the base;
• glue gun;
• various decorative elements to choose from.

How to do?

1. Glue the pre-dried branches with a glue gun to wooden base. First fill in the parallel sides, then the other two parallel ones, keeping the shape of the frame. The branches should be glued close together;

2. Take all the elements that you have prepared for decoration (we chose moss) and stick it in any corner of the frame. You can distribute in other places at your discretion. Now insert the photo into such an unusual frame.

Advice! Children can also be involved in the preparation and creation of such crafts by giving them very simple tasks - to collect twigs, spread with glue and apply.

You can make a photo frame with the following arrangement of branches:

And someone will like the following natural frame:

Pencil stand

This very useful item will never be superfluous, both on the table in the office and on the children's work table.

Prepare:

• a small stump (you can take a saw cut of a tree), whose diameter should be no more than 16 cm and a thickness of 8-9 cm;
• drill with a drill about 9 mm. to make a small number of cracks in the stump;
• sandpaper.

Progress:

1. Peel the stump from the bark;

2. Make a few slots with a drill (from 10 to 25). Step back from each half a centimeter to make the next;

3. With fine-grained sandpaper, process the entire wooden frame, achieving smoothness and removing protruding places;

4. Insert stationery or art brushes into the finished stand.

If you like unusual shapes and want to be original, then a tree frame and, accordingly, the stand may look like this:

Clothes hanger

A hand-made decoration for the hallway will cause more than one enthusiastic compliment, and you yourself will delight your eye every day with such an original element of the home interior.

When getting started, do not forget to prepare the following materials:

• thick branches with the same processes;
• self-tapping screws;
• drill;
• saw;
• board for the base, pre-prepared (can be varnished).

Remember the following steps:

1. Prepare the hooks: cut the trunk of the branch into 2 parts, the length of which should be about 30-40 cm. Using a saw, form a part that looks like a hook. File a knot from the branch being processed approximately 5-10 cm back, and on half of the branch and knot make a cut on the edge;

2. Attach the resulting hook design with a self-tapping screw to the base of the hanger. If you are not going to use a hanger for heavy things, then you can use special wood glue instead of self-tapping screws;

Paint the hook branches with paint or varnish.

Flowerpot

To tidy up your flower pots or flowerpots, achieving a uniform style, you also need to use twigs and send your inspiration to create a product.

To make everything work out as it should, put in the workplace:

• twigs, dried and ready for use;
• saw;
• jute threads;
• piece of burlap.

Let's get started:

1. Using a saw, make all branches the same length.

2. Put on flower pot or flowerpot a piece of burlap and glue its edges.

3. Carefully tie the branches with a thin, strong thread in 2 places: closer to the top and closer to the bottom.

4. Cover the target object with tied branches. To keep everything and have an aesthetic appearance, use a ribbon or thread with a bow.

Hanging table

Hanging things in the house speak of the originality of the owners of the apartment.

Moreover, you can place it anywhere - even near the bed and use it as a bedside table.

What you need to prepare for manufacturing:

• grinding machine;
• board;
• drill;
• glue gun;
• screw;
• S-shaped hook;
• polyurethane spray;
• felt cut;
• thick rope.

Progress:

1. When you have prepared the board, sand it with a special machine.

2. Drill 3-4 holes at the same distance from each other (one of them should be closer to the wall) so that you can stretch the rope through them.

3. Spray the entire piece of wood with polyurethane spray a few times.

4. From the side of the wall, glue the felt piece with a hot glue gun.

5. Pull the rope through the holes and tie knots at the bottom as tightly as possible so that at one awkward moment the whole structure does not end up on the floor.

6. Make a hole in the ceiling with a drill and fit the ring on the screw there. Attach an S-shaped hook to the ring.

7. Collect all the ends of the ropes at the top and make one very strong loop with a knot from them, which you place on the hook.

decorative tree

The tree in the house always looks beautiful and unbroken. To update your interior with such a wonderful product, prepare:

• a few dry branches;
• pebbles (preferably from the sea coast);
• Styrofoam;
• decorative moss;
• glue gun;
• container of an unusual shape.

Let's get started:

1. Pour the prepared stones into a container, almost to the middle.

2. Cut the foam to the shape of a pot and place it on top of the stones.

3. Make a hole in the foam and insert the pre-selected twig there as accurately and evenly as possible.

4. Top with pebbles again for stability and cover with moss.

5. To decorate the tree, glue the decorative flowers in any order with a glue gun.

Advice! The branch before being placed in the container can be painted in gold, bronze or any other color.

Wreath on the door of twigs

Such a wreath can be hung for the New Year holidays, or you can simply decorate the entrance at any time of the year.

You will need a minimum of material:

• twigs;
• copper wire.

Progress:

1. Wind the wire in the form of a circle and build a hook out of it.

2. Gather the twigs into small bundles, connecting with wire at the bottom.

3. Wind bundles of branches around the copper blank until the entire surface is covered.

4. The finished product can be decorated with mountain ash, bows and ribbons, etc.

Decoration of a mirror with cut branches

A boring mirror can be updated with small wooden cuts.

Before you start, prepare everything you need:

• thick and thin branches;
• saw;
• glue gun.

Let's get started:

1. Use a saw to make cuts from the branches. They must match each other in thickness.

Many of our compatriots provide photos of romantic European interiors with the phrase: “You can’t forbid living beautifully.” This is true if you have a good mood, imagination and a desire to make your home cozy with your own hands. Literally everything is suitable for these purposes, for example, dry branches in a vase or in the form of a frame, which are without limitation in the garden. Our main task is to show readers how to make an attractive decor from branches and beautifully decorate the interior without any costs.
The branches are suitable for everything - the manufacture of furniture, decorations, panels. Eco-design has been in the TOP of design preferences for many years, inheriting the traditions of the exterior rustic style. This is not at all surprising, natural decorative materials are always perfect, and also great for creativity.
We recommend making from natural materials:

• wall panels;
• paintings;
• furniture;
• small trinkets;
• holiday decorations;
• lamps.

Wall panels

Eco-decor can be taken as the basis of a design project, it will look great. Note that the level of stylistic design depends only on talent, imagination and perseverance, since any products made from dry branches require careful implementation. Almost everything can be made from snags, tree trimmings, various large dry branches, thin tree trunks - furniture, lamps, decor and, of course, wall panels.

Subject autumn forest revealed repeatedly by many artists, for example, Klimt. Trees with fallen leaves create a calming atmosphere that promotes relaxation. Meanwhile, such a decor of a hallway, living room or bedroom made of dry branches resembling a forest can be decorated with bright elements at any convenient moment, they will thematically enliven the interior and bring natural beauty into it.

Festive home decor - wreaths

Dry branches in the interior will help decorate rooms for Christmas, Valentine's Day and Easter. They can be used to decorate your home. To create an original candlestick for a festive table for your home, take a strong branch that will stand stably on a horizontal surface, paint it with metallic paint. Then apply glitter with varnish, fix the candlesticks with self-tapping screws. For these purposes, any decorative candles are suitable.

Furniture and lamps

Branches in the interior can find their place as components of the original furniture, legs, stands, holders or frames for the mirror. It is better not to talk about furniture options, but to show interesting solutions, invented by designers in different countries. Believe me, such interior items for the home will never look inappropriate, as they are real designer furniture.

Paintings from branches and small decor

An interesting solution that will allow you to avoid wasting money on photo wallpapers are paintings from branches. For example, birch branches in the interior look very elegant and in Russian. With the help of willow trimmings, you can create light "laced" compositions. To do this, it is enough to make a frame from a wooden plank and attach branches selected to the size using self-tapping screws or a stapler. Separate branches can be assembled into various shapes, create a modern graphic installation, decorating paintings with affordable finishing materials.

Christmas tree from branches

Ordinary twigs of trees, which usually abound in an orchard or household plot are a unique material.

Nature has already given them bizarre forms, which, with due imagination and a little skill, can be turned into a real work of art. Crafts from tree branches will originally fit into home environment, will help to diversify and decorate the interior.

material requirements

Of course, not every branch is suitable for making crafts. Material is better prepared in early spring or in autumn, when the bark and pith are untouched by bark beetles.

There are no requirements for the type of wood: birch, willow, grape and other branches are equally suitable for making crafts. The main thing is that the material does not have traces of the presence of pests, chips and other defects.

To exclude the appearance of any insect larvae in the house, collected branches it is recommended to treat with a weakly concentrated solution of potassium permanganate.

So that the craft from branches and snags for the interior is not jarred, the material must be subjected to preliminary. You can do this in two ways:

• in vivo, spreading the branches in an even layer on the floor and keeping at room temperature about 2 weeks;
• accelerated process- Arrange on a baking sheet and place in the oven for 3 hours. There must be a slow fire and an ajar door so that the moisture comes out evenly.

If it is planned to remove the bark from the wood for crafts, this operation must be performed before drying begins. When the branches are freed from excess moisture, the surface can be coated with wood varnish.

Decorative candlestick

This is the easiest way to make DIY crafts. It will take less than an hour to make a decorative ornament. For work you will need:

• glass cup. A container with high and low walls is suitable, it is better to choose transparent glass, but this moment remains at the discretion of the master;
• glue;
• thin dry branches;
• small secateurs.

On the initial stage the lower parts of the branches need to be cut so that they lie flat against the bottom of the glass. The proportionality of the upper part does not play a significant role.

The further operation is simple: we spread the branches with glue and glue them to the wall of the glass close to each other. The candle is inserted inside the glass container, and the original candlestick for decorating a room or a romantic dinner is ready.

The second version of this craft: the branches are glued directly to the candle. For this, thin willow twigs that have a straight shape are more suitable. However, such products are used only as a decor: it is not worth lighting a candle pasted over with dry wood for reasons of fire safety.

Photo frames and mirrors

From tree branches, you can make a beautiful frame for a family photo or a mirror in the hallway. The work is carried out according to an identical scheme, the difference lies only in the method of registration and quantity. consumable for crafts.

To decorate a photo, wooden frame dried and varnished thin branches are glued.

Note! The basis of the photo frame can also be made independently by sawing a rectangle out of plywood with a jigsaw.

Pasting starts from the long sides. The branches are laid close, it is allowed to apply two or three rows. Then, in a similar way, the short sides of the frame are pasted over. At the corners, the ends of the branches can be laid end-to-end or with an intersection, both options look equally interesting. As an additional decor for crafts, you can use dried moss or any other decoration at the discretion of the master.

In a similar way, you can make the original frame for the mirror. However, here the base has a larger area, and finding relatively straight branches can be problematic. In such cases, the source material can be cut into small pieces (3-5 cm) and the branches can be glued not parallel, but perpendicular to the base. There will be more time to make such crafts from branches, but an ordinary mirror will look elegant, unusual.

coasters

Having cut down an old tree in the country, you do not need to immediately send it to the fire. From a small part of the trunk, you can make an original stand for stationery. To create this craft you will need:

• cut a trunk with a diameter of not more than 15 cm, a height of 5-8 cm;
• drill with a set of drills;
• fine-grained sandpaper;
• wood varnish.

The workpiece is cleaned of bark if necessary, the lower part, which will serve as the base, is leveled to give stability. Holes are drilled in the upper part, the distance between each is kept at 5-10 mm. Then all surfaces and corners are sanded with sandpaper. At the final stage, the wood is covered with several layers of varnish, and after drying, the stand for pencils and pens is ready for use.

Hanger

Homemade hangers are ideal for decorating the hallways of apartment and private houses, summer cottages. This is not even a craft, but a real joinery made from tree branches.

For manufacturing you will need:

• board. Its length and width are chosen arbitrarily, depending on the number of clothes that will be placed on the hanger;
• thick branches of trees with branches of branches, preferably located at an acute angle.
• self-tapping screws;
• saw;
• paints and varnishes.

The base board must be sawn in accordance with the specified dimensions, varnished or painted, having previously treated the surface with sandpaper.

Each thick bough is cut to a length of 30-40 cm, 1-2 processes are left on the base, which will serve as hooks for clothes. The back surface of the knots can be bevelled to ensure a snug fit to the base.

Branches-hooks are fastened with self-tapping screws, if homemade hanger it is not supposed to be used to store heavy things, you can get by with glue.

Vases

Flower pots and flower vases can also be beautifully decorated with branches. To do this, the branches are cut on both sides so that the source material has the same dimensions. The branches are laid out in one row on the table, tied together with a strong thick thread, twine. To make the design more presentable and durable, the branches are fixed in two places: above and below. If the work is done correctly, you should get a path of tightly fitting branches.

A vase or flower pot is covered with burlap. At the final stage, the branches are wrapped around the base, the ends of the twine are tied together with a bow. As an additional decoration, the surface of wood crafts can be varnished or decorated with decorative elements.

As a decor for branches for a vase, do-it-yourself flowers are made of paper, then glued to the craft. Use cones, old beads, pieces of cotton wool. Diode bulbs look beautiful as a backlight for a floor vase.

Crafts from roots and snags

Remarkable but stylish decorative ornament or wooden sculpture self made can be created with minimal effort. This will help stumps, snags, roots, which remain in large quantities after harvesting trees. In fact, the snag is already a finished sculpture, which only needs to be cleaned of bark, dried and varnished. Children are happy to look for interesting forms. Crafts from snags are suitable for older kindergarten groups and for school.

Wood in general is a unique raw material for construction or home creativity. This is an environmentally friendly material that is easy to process, retains its original properties for a long time, does not require special care.

In addition, even ordinary branches and twigs that are used to kindle a fire can turn into real works of art even in the hands of an inexperienced master. Crafts are made from small branches and large branches, after sawing off all that is superfluous.

From scraps of tree trunks, you can fold a low woodpile, decorating it with thin branches on top - you get an interesting coffee table, which will organically fit into any interior.

Branches with a diameter of 5-7 cm and a height of 1.5 m are assembled into a rectangular frame. The walls are created from branches folded crosswise. We lay glass on top and get a beautiful dressing table.

Tree branches can decorate the interior and decorate almost any piece of home furniture: floor lamps, shelves, ceiling chandeliers and Wall lights. Finally, thin twigs can simply be placed in a vase, making a decorative composition.

Crafts made with your own hands from natural materials will create an atmosphere of comfort and a romantic atmosphere in your home. Such crafts and interior items from natural material very popular today. It is especially pleasant to surprise your friends with such handmade decorative items. To decorate your interior country house or apartments, you can make crafts from the branches of various trees.

Branches that are not eaten by a bug are required for use. Collect such branches better in autumn or early spring. Also, without exception, all branches require processing in at least 2 stages:

1) Drying the branches is a must. Otherwise, the product will warp in the first month. We dry at room temperature for 1-2 weeks. Or 7 days for batteries. And if you want very quickly, then in the oven -2-3 hours on low heat and with the door ajar, so that moisture comes out.

2) Also desirable painting or varnishing. If there is no special varnish for wood at all, then it can be treated with transparent nail polish.

To do this, we offer you 10 do-it-yourself crafts from tree branches.

Candlestick from tree branches

Stylish candlestick in 5 minutes

In order to make a candlestick from twigs, We need:

• Dry branches.
• Small glass cup.
• Hot glue gun.
• Candle.

Step 1:

Collect a small number of twigs, wash in water and dry them. After drying, cut them with secateurs approximately equal in length.

Step 2:

Take a small glass cup and a hot glue gun. Apply glue to each branch with a glue gun and glue it to the cup. Thus, glue each next branch side by side to each other.

Take a candle required size and put it inside the glass. The candlestick is ready to use.

Another option to make a candle holder is to simply take a thick candle and glue the branches around the candle with a glue gun. Also, if the branches are painted gold, the effect will be more glamorous.

Branches painted in gold color

golden candlestick

House of branches

An unusual craft for a child can be made from ordinary twigs. In the photo below, our reader shared his wonderful creation that he made for a child.

ADVICE: If you decorate the house with a garland, you will get a great night light in the children's room!

House of branches

How to make such

Tree branches photo frames

Unusual photo frames can be made from dry branches with your own hands.

For this we need:

• Dry branches.
• Wooden base for the frame.
• Hot glue gun.
• Decor (moss).

Step 1:

Take dry branches. With a hot glue gun. Apply glue to each branch with a glue gun and glue it to a wooden base. In the same way, glue all subsequent branches side by side to each other in the form of a rectangle.

Step 2

Then take the decorating material, in our case, moss and stick it in the corner of the frame. You get a wonderful composition.

See even more photo ideas on how to frame and display photos in the interior.

Making a spring photo frame

Tree with photos in a vase

Pencil stand

This little thing will look amazing on your desktop.

DIY pencil stand

You will need:

• A saw cut of a tree or a stump, with a diameter of 10 to 15 cm and a thickness of about 10 cm (the photo shows such a “stump”, previously peeled from the bark, but for a greater effect of naturalness, you can leave the saw cut in its original form).
• Drill, the diameter of the feather drill of which should not exceed 8-10 mm. The spade bit is used to create shallow, but clean, smooth-edged holes.
• Fine-grained sandpaper.

Step 1:

Take a drill, make 25-30 holes in the log house (depending on the diameter of the "stump"), each at a distance of 0.5 - 1 cm from each other.

Make 25-30 holes in the log house

Step 2:

After that, take a fine-grained sandpaper and sand the surface so that there are no bumps.

Sanding the base and top with sandpaper

After that, the stand is ready. It can serve not only for stationery, but also for artistic brushes.

See also other ideas on how to design a pen organizer.

Pencil holder

Stand for pens and phone

Clothes hanger

Such a craft will undoubtedly decorate your hallway and delight everyone who comes to visit you. You just need to choose branches that have fairly strong and thick hook knots. Hangers can also be made from small tree branches.

Hanger in the hallway for clothes

You will need:

• Strong branches with thick knots with a diameter of 30-50 mm.
• Self-tapping screws.
• Saw on wood.
• Drill.
• Blank for the wall

Step 1:

Saw the stem of the branch in half. We select a suitable workpiece with a length of 300-400 mm. We immediately form a hook with a miter saw. We cut the branch from the branch with a saw at a distance of 50-120 mm. And then we cut the half of the branch with a knot with a saw along the edges.

We select a suitable workpiece with a length of 300-400 mm.

Step 2:

We drill a hole in the hook with a self-tapping screw. And we fasten it to the blank under the hanger. If desired, you can hang individually or form a hanger. If the hanger is designed for light things, then you can attach the twigs with wood glue.

Painted with white acrylic paint

If desired, these hooks can be painted with special wood paints or an aerosol spray can be used.

The original hanger is ready

Flowerpot

In order for all the pots to become the same and original, you can make a flowerpot with your own hands. You will need a minimum of effort and a maximum of desire and good mood.

Flowerpot from branches

For this you need:

• Dry branches.
• Saw on wood.
• A skein of twine.
• A piece of burlap.

Step 1:

To begin with, we take dry twigs and with a saw on a tree we make them approximately all of the same length.

cut branches and tie together

Step 2:

Then we wrap a flower pot or flowerpot with a piece of burlap. Fix it with any glue.

Step 3

Take the previously prepared branches, tie them together with twine so that the branches do not fall apart (see photo)

We wrap our old flowerpot with a piece of burlap

Step 4:

Then tie a pot or flowerpot with these branches and secure it with a bow.

With the help of a rope we fix the branches around the flowerpot

DIY hanging table

Hanging objects can give any interior a feeling of weightlessness and airiness. Suspension wooden table can be amazing bedside table. It is attached with three ropes to the ceiling by a hook. How to make it? Necessary:

• Tablet.
• Grinder.
• Drill.
• Hot glue gun.
• Screw.
• S-shaped hook.
• Polyurethane spray.
• Felt strip.

Hanging table installation

Step 1:

First you need to choose a suitable plank of unusual texture. Treat all irregularities with a grinder.

Step 2:

Next, you need to drill three holes, which will correspond in diameter to the selected rope. The holes should be equidistant from each other, and one of them should be located as close to the wall as possible. You can hang the table with four ropes, then you will need to drill four holes.

Step 3:

The wooden surface should be covered with several layers of polyurethane, allowing each of them to dry. Since the table will be adjacent to the wall, protect its surface from damage. To do this, glue a strip of felt with hot glue to the part of the table that is adjacent to the wall.

Step 4:

Next, pull the ropes into the holes and tie strong knots under the plank. After that, you need to drill a small hole in the ceiling and insert a screw with a ring into it, into which you should thread the S-shaped hook.

Step 5:

Then tie all the ropes at the top into a strong knot with a loop and hang the structure on a hook.

The result will be simply mesmerizing. Your hanging table will simply float in the room.

decorative tree

To decorate the interior of your home, we suggest doing decorative tree with flowers.

You need:

• Twigs.
• Decorative flowers (can be made from paper).
• Sea pebbles.
• A piece of foam.
• Hot glue gun.
• Unusually shaped flowerpot (in our case, square).

Step-by-step production of a decorative tree

1. Take sea pebbles and fill the bottom of the flowerpot.
2. Then put the foam on the pebbles in the flowerpot and insert the prepared twig into this foam.
3. Pour in sea pebbles again so that the branch is more stable. Insert the moss up.
4. Now let's decorate the branches. Take decorative flowers and glue them with a glue gun to a branch in a chaotic manner.
5. When you glue all the flowers, then your decorative tree will be ready to decorate your apartment or house.

Decorative tree painted in gold

Decorative tree white

Wreath on the door of twigs

This is the easiest master class that could only be shown. Let's make a decorative wreath on the door from twigs. To start and finish our craft, we need:

• Twigs.
• Copper wire.

Base for a Christmas wreath

Step 1:

Take a copper wire and make a circle with a hook out of it (see fig.).

making a circle out of wire

Step 2:

From the branches it is necessary to make small bundles, fastening them with wire.

We tie the branches into small bundles

Step 3:

Then we fasten bundles of twigs to a pre-prepared circle of copper wire. And so on until the end. Your wreath is ready. You can also decorate it with spray paint, giving it your favorite color.

We fasten the "bundles" of branches to the base

The wreath can be decorated as you wish. And make it either New Year's or for another reason

from spruce and pine in this article!

Decoration of a mirror with cut branches

If you are tired of the old mirror and want to change it, do not rush. With the help of cut branches, you can decorate your mirror, and it will sparkle with its beauty in a new form.

Mirror decorated with cut branches

What is needed for this:

• Twigs of different diameters.
• Wood saw.
• Hot glue gun.

Work process:

1. Let's get to work. Take the branches and make saw cuts with a saw of the same thickness.
2. Then we take a glue gun, and glue each saw cut around the mirror. It will come out very original.
3. In the same way, you can glue vases and flower pots, or whatever your imagination is enough for.

You can also make this one from small boards - LESSON here!

wall decor

With the help of branches, you can make various decorations - - Check it out, you're sure to find something!

And now we offer a simple master class on making a seahorse. It will decorate your room, giving it originality. To make the decor more original, come up with your own figurine.

Decor from branches for the wall

For this you need to have:

• Twigs of different sizes and diameters.
• Branch secateurs.
• Hot glue gun.
• Cardboard, simple pencil, scissors.

Step 1

Draw some kind of figure on the cardboard, for example, a sea horse. And cut with scissors.

Cut out paper shape

Step 2

Take a hot glue gun, apply glue to the branches and glue them to the cardboard blank, lining them up one by one.

Step 3

When you're done gluing. Take a pruner for branches and cut off the branches that have extended beyond the edges of your base. It will turn out very beautiful decor on the wall.

In the same way, you can make crafts for the New Year in the form of a Christmas tree, decorating it with decor, or an asterisk on the door, crafts for Valentine's Day.

Twig heart