House 6 by 8 two-storey log. Projects of wooden houses. Complete set: Foundation tape shallow
Linear dimensions 6.0x8.0 m
Area (total/residential), m2 66/53 m2
Number of floors 2
Number of bedrooms 3
Construction time, days 20
Complete set of logs with a diameter of 22-24 cm
BASIC EQUIPMENT:
- Log cabin, 22-24 cm in diameter, processed with an electric planer. Cutting "in the bowl" or "in the paw."
- Internal partitions - a log, marked with a different color - frame (mounted during finishing work).
- Sexual and ceiling beams(lags) - timber 150x100.
- The pediments are chopped.
- Loading Unloading.
- Delivery within the Moscow Ring Road (for distant regions is calculated individually).
- Expendable materials: hydroisol for 1 crown, nails, staples, hardware, wooden dowels, etc.).
- The height of the 1st floor is 3 m. (Clear 2.7 m.)
- The rise of the walls of the 2nd floor by 1.2 m.
- The height of the 2nd floor is 3.3 m to the ridge.
At the request of the customer, changes can be made to the project in terms of layout, height, and basic configuration. The diameter of the log, the type of processing can also be changed (barked, for a scraper, for an electric planer).
If changes are made, check the final cost.
Complete set of timber 150x150
BASIC EQUIPMENT:
- The walls of the house - timber 150x150.
- Internal partitions - timber 150x100, marked with a different color - frame (mounted during finishing work).
- Gables - timber 150x150.
- truss system- timber 150x50.
- crate - edged board 150x25.
- Mezhventsovy insulation - jute flax fiber.
- Roofing membrane or roofing felt (optional at the request of the customer).
- Consumables (wooden pins, nails, staples, hardware, waterproofing for 1 crown, etc.).
- Loading Unloading.
- Draft floors on the 1st floor.
- The height of the 1st floor is 3 m (cleanliness is 2.7 m).
- The rise of the walls of the 2nd floor by 1.2 m.
- Height of the 2nd floor 3.3 m to the ridge
Complete set from prof. timber 145x145
BASIC EQUIPMENT:
- The walls of the house are timber 145x145.
- Internal partitions - timber 145x95, marked with a different color - frame (mounted during finishing work).
- Gables - timber 145x145.
- Rafter system - timber 150x50.
- Lathing - edged board 150x25.
- Mezhventsovy insulation - jute flax fiber.
- Floor and ceiling beams - timber 150x100.
- Loading Unloading.
- Delivery to Moscow Ring Road (for distant regions is calculated individually).
- Roofing membrane or roofing felt (optional at the request of the customer).
- Consumables (wooden pins, nails, staples, hardware, etc.).
- Treatment lower crown antiseptic.
- Binding of the lower crown - timber 150x200.
- Draft floors on the 1st floor.
- The height of the 1st floor is 3m. (clear 2.7 m.).
- The rise of the walls of the 2nd floor by 1.2 m.
- The height of the 2nd floor is 3.3m. to the skate
At the request of the customer, changes can be made to the project in terms of layout, height, and basic configuration. If changes are made, check the final cost.
Complete set: Foundation tape shallow
Sand, poured to a depth of at least 20 cm. Carefully compacted.
Foundation works:- Digging a trench around the perimeter and under the partitions, backfilling with a sand cushion, tamping.
- Installation of formwork with ventilation holes.
- Reinforcing cage manufacturing.
- Pouring concrete. Overclocking.
- Formwork dismantling.
Complete set: pile-screw foundation:
Pile diameter - 108 mm.
Pile length 2.5 m, screwed to a depth of 2 m.
Installation time (20-30 piles) - 1-2 days. Installation can be carried out on sites with any type of soil under any weather conditions.
Warranty and full package Documents.
Works on the construction of a pile-screw foundation:- Marking the foundation around the perimeter and under the partitions (if provided by the project).
- Delivery of all materials to the site, unloading.
- Screwing piles to the depth specified by the Customer.
- Filling the internal cavity of the piles with cement mortar.
- At the request of the Customer, it is possible to weld caps or a channel (prescribed in the Contract).
layout
We bring to your attention two-storey house from a log. The cottage has a veranda, which makes it even more attractive to buyers. The house has three bedrooms, so a family can live there permanently. The next advantage of the house is the material that was used in the construction. Wood is an environmentally friendly material. In addition, in such houses it is very easy to maintain the desired air temperature.
- Log house from planed logs 1st and 2nd floor, average diameter 25 cm.
- The ceiling height of the 1st floor is 2.7 m, the 2nd floor is 2.5-2.7 m.
- The rise of the 2nd floor is 1 m. 20 cm.
- Partitions according to the project from a log, 1 and 2 floors.
- Type of cutting bowl or paw (any).
- Ceiling and floor beams - carriage 0.15 m.
- Rafter system - timber 50x150 mm.
- Roof gables - chopped logs
- Roof lathing - edged board 25x150 mm.
- Roof covering with ruberoid.
- All consumables (flax, hardware, foundation waterproofing, roofing felt).
- Delivery in the Moscow region, and other regions of the central part of the Russian Federation (Yaroslavl, Ryazan, Nizhny Novgorod, Tver, Kaluga, Tula, Vladimir, Ivanovo regions and other regions of the Russian Federation).
- Unloading and assembly at the customer's site.
In the last decade, many city dwellers have been striving to live outside the city while working in the metropolis. But what if housing made of stone or brick is not affordable. Exit - buy log house. It is distinguished by comfort, quality, durability, quickly conducts and retains heat inside for a long time.
A house made of logs is an excellent option for the eternal "housing problem" in our country. We will learn more about the option of such housing 6 by 8 with an attic, a veranda, a porch, spacious rooms and amenities.
The project of a house made of logs 6x8 in two floors involves:
- Use as building material logs with a diameter of 25 cm, "cooked" according to a special technology, a log house in a bowl" ("paw"), the height of the ceilings on both floors is 2.5-2.7 m, the walls of the 2nd floor are raised by 120 cm.
- Finishing with natural lumber that is safe for humans: logs, beams, gun carriages, edged boards. Structures are made of them, the space inside is also finished with them. The roof is completely covered with ruberoid.
- Mandatory protection of the foundation from the harmful effects of ground and melt water.
- Delivery of a disassembled log house and all necessary consumables to the site to the customer, turnkey assembly.
We must not forget that the most important thing in any home is a competent layout.
- The ceiling height of the 1st floor is 2.70 m, the 2nd floor is 2.50 m.
- The outer walls of the house are made of round logs 220 mm. Cutting the corners of the house into a bowl.
- Antiseptic filling crown.
- Floor and ceiling beams - timber 100x150 mm, with a step of 60 cm.
- Capital internal walls 1st floor - rounded log 220 mm.
- The main internal walls of the 2nd floor are round logs 220 mm.
- The pediments are made of rounded logs 220 mm.
- The rafter system is a beam 150x50 mm, with a step of 60 cm. Fastening the rafters in the ridge to metal plates.
- Lathing - edged board 150x25 mm.
- Ruberoid - for the starting roof. Installation with metal tiles, ondulin, profiled sheets is possible.
- Jute is a natural, environmentally friendly fibre. Mezhventsovy insulation is placed between the bars.
- Consumables - nails, staples, antiseptic, etc.
- A set of birch dowels, for connecting the walls of the house - are installed in a checkerboard pattern.
- Delivery in the Moscow region - FREE OF CHARGE!
- Unloading and storage of material at the customer's site.
- Installation of the house under the roof.
- Warranty obligations for the erected structure and all general construction works performed by our company are 1 year.
- At the request of the customer, it is possible to change the configuration, both in the direction of decreasing and increasing the cost of the project.
The price does not include floors, ceilings, windows, doors, stairs, roof insulation and others. Finishing work!!! Finishing is carried out 6-9 months after the installation of the house under the roof, after shrinkage and drying of the walls of the house.
Save on building a house without compromising its quality: choose standard project. On the page we placed a catalog of projects wooden houses, developed by our architects and repeatedly embodied by builders.
We use only northern wood species, controlling every stage of building a house. The construction is carried out on a turnkey basis and includes all stages, from the installation of a log house and the construction of a foundation, ending with finishing and communications.
Catalog of projects from rounded logs or manual felling
In the catalog you will find:
- compact one-story houses;
- many projects of two-story wooden houses with a balcony;
- spacious estates with an attic;
- bathhouses with a porch or terrace;
- projects of wooden houses with a garage.
You can look at the layout of the house or get acquainted with its parameters by clicking on the link of the selected project. Each house can be built from rounded or chopped logs (Canadian or Russian felling).
The choice of wood for construction
We build from Kirov pine, cedar and larch. We have two own production facilities located in Kirov and Sayanogorsk (Khakassia). When booking a forest during the development of a project, it is possible to choose the region of cedar harvesting: the available logging geography is the whole of Siberia!
A rational solution is a combination of different types of wood:
Mortgage crown - Siberian larch. This durable and moisture-resistant wood will last almost forever, you will be relieved of problems with the blind crown.
Walls made of Kirov pine - this solution will reduce the cost of a wall set by 15-20% compared to cedar of the same diameter.
Above - a pair of cedar crowns that will improve the atmosphere in a pine log house, enrich the air with useful phytoncides and aroma.
We have 20 years of experience working with wood, we have permanent teams and hereditary cutters from Siberia. Our chief architect has been working with our company since 2002, all of his design and planning decisions are carefully thought out and calculated!
Dear visitors! The BrusLandiya company informs that when ordering the construction of a house from a bar or a log, you receive the following services absolutely FREE OF CHARGE:
SERVICES FOR FREE:
- The device on the site of the change house for the brigade (if there are no other options for living).
- Delivery to the site of materials by own equipment.
- Unloading and storage of material on the site.
- Working project at home.
- Redevelopment of the house for your site, without changing the amount of materials.
- Technical supervision over the quality of work performed. Warranty 3 years. Warranty service at home.
Information for customers
Types of profiled timber
Profile A- This is a classic type of profile, it has a wide groove, a compensation cut from above and below (it saves the timber from cracks). The beam fits snugly against each other, and in order to prevent the house from shrinking, the crowns are fastened with wooden dowels (dowels). The joints of the timber in the corners of the house are made according to the dovetail principle, which ensures the absence of through cracks in the house.
Profile B- This type of profile, which is often called Finnish or Scandinavian, is the most popular in the construction of timber houses. It has a double lock (which ensures the tightest fit between the crowns), a special saw cut from above and below (it saves the beam from cracking). Jute (a special sealant that is placed between the crowns) helps to provide better thermal insulation. Also, the crowns of the house are fastened with wooden dowels (so that the beam does not lead when it dries out). The beam in the corners of the house is sawn dovetail(so that there are no through cracks in the house). A house made of timber of this profile is very durable, warm and usually lasts for many years without repair.
Profile B- If you are choosing between a profiled bar and a log, this profile is a great option, as it has all the advantages of option A, plus it imitates a log on the outside. Jute is placed between the timber (the most the best insulation, better than moss and tow many times). And the crowns are additionally fastened with dowels (these are wooden sticks for attaching the timber to each other). This fastening ensures even shrinkage of the house.