Is it possible to make a corner sofa in the kitchen yourself: a master class. Do-it-yourself kitchen sofa How to make a do-it-yourself kitchen corner sofa

The need to make a sofa for the kitchen with your own hands may arise if there are no suitable models on the market, or the size of the room does not accommodate standard furniture. You can call a specialist to take measurements and make a sofa to order, but this will require large financial costs. In order to save money, it is best to make it yourself.

Similar articles:

Deciding on design and construction

Before you make a sofa in the kitchen with your own hands, you need to decide on the design:

1. A straight sofa is a simple piece of furniture with a solid frame, partially or fully upholstered in the body. It can be with or without armrests, include niches under the seat and additional shelves. Direct folding upholstered furniture is popular, allowing you to organize additional beds at any time.
2. More often they use a sofa for the kitchen, which has an angular design. It saves space, as it involves installation in the most unclaimed places in the room.

The choice of sofa design for the kitchen is based on the interior of the room and the tastes of the owners. You can create a bench with ready-made purchased legs made of wood or metal, or include them in the drawing of the side faces, or you can exclude the legs and get a deeper niche under the seat due to this.

The upholstery methods themselves differ in design. A sofa with soft inserts will cost less. Fully upholstered furniture looks much cozier and richer.

Features of kitchen corner sofas

The main feature of the corner kitchen sofa is the L-shape. It consists of 3 parts: short, longer and connecting in the form of a quarter of a circle. There are sofas that are made up of 2, 4 or more parts that are not fixed to each other (modular). They are additionally equipped with ottomans and tables.

Corner sofas differ in functionality depending on the additional configuration. They are equipped with hidden storage spaces under the seat, open shelves in the armrests and on the back, drawers and even sleeping quarters.

Often the backs of the corners are only slightly tilted to take up as little space as possible against the wall. If the footage of the room allows, you should consider how to make corner sofa more luxurious. You can equip it with curved soft armrests and backrest, increase the depth of the sofa seat.

Sleeper sofa

Kitchen sofas are primarily designed for seating. The depth of such a product does not exceed 50 cm. This is not enough to lie down. To solve this problem, manufacturers supply straight and corner kitchen sofas with a transformation function or hide a bed inside the furniture.

The main distinguishing characteristic is the transformation mechanism:

• Roll-out - the simplest. Allows you to roll out the lower block of the sofa and expand the soft area.
• The book is the most common mechanism with a falling sofa back.
• Dolphin - a sleeping place is created by stretching the lower sofa block.
• Accordion is the most compact sofa. Does not require additional space behind the back. Unfolding consists of two stages: pushing the seat out and laying it in the formed backrest niche.
• Click-clack is an improved book. Allows you to additionally lower the side parts, so the finished product can be much smaller than the standard.

When choosing the design of a corner sofa for a kitchen with a berth, special attention should be paid to the quality of the sliding mechanisms, the strength of the fasteners, the absence of visible defects, otherwise the furniture will not last long.

If the creation of a kitchen sofa implies the presence bed, the best option there will be a clamshell built inside (folding mechanism meralat).

Sofa for the kitchen of non-standard sizes

A radical redevelopment of the apartment can lead to the fact that the dinette offered by the manufacturers does not fit into the kitchen. In such cases, it is advisable to order individual sizes, however, such a purchase can hit the family budget hard.

In order to reduce spending on an additional piece of furniture, the owners make a decision. If you approach the matter with intelligence and patience, creating an original sofa will not take much time and effort.

With storage box

When making a corner sofa with your own hands, do not neglect the opportunity to provide it with additional storage space for rarely used kitchen utensils.

For this purpose, a special cavity is allocated in the body of the future corner, into which a retractable mechanism is built in and a capacious drawer is attached. Fastening the seat to wide curtains makes it possible to raise it and access the interior spaces of the sofa parts.

Drawings and diagrams

The work begins with the creation (after familiarizing yourself with the kitchen corners presented by the manufacturers) of a furniture project in a single copy, you need to analyze how the butt, upholstered parts, and the shape of the finished product will look like.

The most critical part of designing a kitchen sofa:

• correctly determine the location;
• take measurements;
• according to the received data, create drawings and assembly diagrams.

The proposed ready-made options differ from the required sizes, so the drawing will have to be drawn from start to finish, based on the available ones:

1. The width of the walls near which the corner will stand (the width of both parts is taken as a basis minus 40-50 cm, depending on the depth of the seat). Calculations are needed to compensate for the dimensions of the connecting part.
2. The height of the seat and back is determined if it is necessary to deviate from the standard dimensions.
3. The front lower part of the case is attached at an angle for a comfortable position of the legs. It will be slightly larger than the back panel. This also needs to be taken into account.
4. Depending on the thickness of the material used, the width of the main parts of the corner is reduced.

According to the data obtained, the size of each individual did, the amount of material and accessories required. An exact drawing of each individual element is drawn.

The diagram will later help you figure out how to make a sofa in the kitchen with your own hands, tell you the position of the parts, attachment points, and determine the procedure.

Necessary materials

The choice of material depends on the bench model, financial capabilities and appearance finished product. The most reliable wooden sofas will cost more, and wood processing will require additional effort and skills. Therefore, you should consider materials for the manufacture of a budget version of the corner. This will require:

• Wooden beam to create a frame and auxiliary jumpers.
• Laminated chipboard or plywood sheets with a thickness of at least 16 mm.
• Fiberboard for hiding the edges of the skin and making the bottom of the box.
• Lifting or roller mechanisms (if necessary).
• Filler for soft parts (foam rubber, synthetic winterizer, holofiber).
• Upholstery material.
• Self-tapping screws, nails, screws and steel corners, staples for a construction stapler, glue.

Upholstery selection

The upholstery material should not only be pleasant to the touch, but also have a beautiful appearance. The main characteristics of fabrics in the kitchen: do not absorb moisture and odors, have a high degree of retention of the original shape and are easy to clean. The upholstery of the kitchen sofa must fully comply with all these requirements.

The most reliable and luxurious material is leather, but its price is appropriate. Of the more common budget options there is a conditional rating of fabric for furniture upholstery:

1. Cotton is a natural fabric. Subject to fading in the sun and severely deformed.
2. Velor looks nice, but quickly wipes off.
3. Jacquard is a dense fabric. Virtually unaffected by ultraviolet radiation and mechanical damage.
4. Microfiber is a durable Teflon impregnated fabric.
5. Chenille is a textured fabric made of fluffy threads. Easy to clean.
6. Tapestry is a natural woven material with a high degree of wear resistance.

It is customary to upholster with a single piece of fabric, but handicraft lovers, when creating a sofa with their own hands, can make it unique by using material made in the patchwork style (patchwork upholstery) from pieces different color and invoices.

Required Tools

It is necessary to prepare a standard set of tools:

• Ruler, tape measure, pencil, construction knife and scissors.
• A hand saw for wood or an electric jigsaw for cutting blanks and pieces of timber.
• Sanding machine for processing wood cuts. To avoid sanding, you can hide the edges under the fittings or upholstery.
• Electric drill with drills of different diameters and a screwdriver.
• Furniture stapler.

Preparing the back frame from timber and plywood

Considering the creation of a sofa for the kitchen, as an example, we can take a straight double bench with plywood sides and a built-in storage box. After the side parts are cut out with the help of patterns, the timber is cut into pieces in accordance with the dimensions in the drawing, step-by-step instructions will help in assembling the frame:

1. Alternately, 5 bars are attached between the armrests in the designated places: 2 in the lower part at a distance of 15-20 centimeters from the floor - this is the base of the frame and the future bottom of the box, 1 - in the upper part of the back, 2 bars fixed at the same level just below the location of the future seats, will serve as the basis for it.
2. The frame is strengthened with inserts located across the main ones in the middle. One connects the upper and lower rear bars (back), the other is fixed between the front ribs of the frame. Another piece, screwed horizontally, reinforces the base and bottom of the box.

All connections are made with self-tapping screws. You get a detail that looks like a garden bench without wooden lintels.

Assembling a sofa for the kitchen

When the frame of the future sofa is ready, proceed to its final assembly:

• Plywood blanks are screwed alternately, which will become the front and rear walls of the built-in box. Fasteners are placed in increments of 15 cm.
• A fiberboard sheet is fixed to the bottom of the box around the entire perimeter. In this case, it is better to use a construction stapler.
• The back, pre-upholstered with fabric, is screwed to the transverse beam in the upper part. At the bottom - they are fixed with self-tapping screws screwed on the left and right into the side parts.
• With the help of a lifting mechanism, a seat is attached, pre-upholstered with the selected material. First, curtains are screwed to the rear edge. Then the free part is fixed to the back of the box.

The back of the sofa is sewn up with a fiberboard blank fixed to the upper and lower longitudinal bars.

When creating a kitchen corner, first the frame of both halves of the backrest is made of timber and plywood, then they are fastened with a connecting part. At the end, soft components are installed.

Kitchen sofa upholstery

Sheathing a sofa yourself is quite simple. The work is carried out in several stages:

1. With the help of a paint knife, blanks are cut out of foam rubber exactly according to the size of the seat and back, fixed with special glue in the right place. You should not fix the foam rubber with a stapler - this will disturb the even surface, damage the material.
2. Lay the fabric face down on a flat surface. An inverted, intended for processing, piece of furniture is placed on top in the center. The size of the fabric blanks should exceed the size of the base in order to compensate for the height of the filler and the bending of the material.
3. Pressing and slightly pulling the upholstery, the edges are fixed with staples using a furniture stapler. If the surface is even, without distortions and folds, fix it around the entire perimeter.
4. To hide jagged edges fabrics, a fiberboard panel is screwed onto the surface.

If the kitchen sofa is fully fitted, instead of foam rubber on the side parts, a thin synthetic winterizer is used.

The last step is decorating.

After the furniture is ready and in place, it's time to do some additional decor. The sofa is covered with pillows in the color of the curtains or walls. To protect the upholstery, you can sew a cover with ties or elastic bands that will cover the entire sofa. This cape can be removed and washed at any time.

What do you do with old furniture?

It is almost impossible to list all the options and models of sofas. You can choose the appropriate option in the store, but you can also make a sofa with your own hands. Consider the implementation features.

DIY rounded sofa

To make such an unusual sofa with your own hands, you will need right material. Ideally suited for these purposes furniture boards made of wood, or thick plywood. The material must be such that the design can cope with a certain load.

A certain margin of dimensions is laid for attaching the upholstery.

Figured parts are more convenient to make from fiberboard and then reinforce boards.

It is preferable to make the soft part multi-layered. used foam rubber with various thicknesses and densities. It is fixed on the seat and back of the sofa, as well as on the side parts.

Foam rubber closes synthetic winterizer.

Covers made of furniture fabric.

The cover can be sewn on your own or ordered ready-made if the fabric used is too thick.

Legs are purchased in stores with furniture fittings. Pillows will help make the sofa more comfortable.

Sofa book: how to do it yourself

You need to start making a sofa book with your own hands by creating the main frame structural elements. This is a seat and back, side parts and a box for things.

do-it-yourself sofa step by step. A photo

. Box

Begin work with the manufacture of the box. You need to take two boards one hundred ninety centimeters and eighty centimeters long. Their width is twenty centimeters, and the thickness is two and a half centimeters. We also need four bar 20 cm long and with a section of 5x5 cm.

A box is assembled from these materials.

The structure is supplemented with slats installed across, from boards 80 cm long, 5 cm wide and 2 cm thick. The bottom is covered with a sheet of fiberboard with dimensions of 190x80cm.

. Seat and back

To make seat and back frames, take beam with a section of 40x60cm. A rectangle 189x65cm is made from it. Timber parts are connected with nails and self-tapping screws, drilling holes.

To finished frames join lamellas from wood. They will become the support for the mattress.

. armrests

First from a sheet Chipboard, whose thickness is 2.5 cm, cut out the side walls of the sofa. Dimensions are in the photo.

Then, according to the same dimensions, the frame is knocked down, to which the sawn wall is attached.

On the sides of the box, holes are drilled with a drill with a diameter of 10 mm.

. Assembly

When all the frames are assembled, the sofa parts are connected. To assemble a sofa book with your own hands, you will need special mechanisms. They are sold in hardware stores designed for upholstered furniture. They are attached so that there is a gap of 1 cm between the back and the seat (when they are laid out). When folded, the seat should not extend beyond the level of the armrests.

. Foam rubber laying

Fix on top of the lamellas interlining. They put on it foam sheets, which are about 6 cm thick. In order for the sheet to fit correctly on the frame and not close the transformation mechanism, cut out pieces in the corners.

In order to make a soft roller on the edge of the seat, a strip of prorolon 2 cm thick and 20 wide is glued there. Another sheet of foam rubber is glued on top, the thickness of which is 4 cm. Its edge is bent down, under the seat.

Similar actions are performed with the back. Then, covers sewn to size are stretched over the back and seat.

To make soft armrests, they make a roller from foam rubber. Foam rubber is used with a thickness of 4 cm. The width of the strip at the beginning is 15 cm, and towards the middle it decreases to 5 cm.

Foam rubber 2 cm thick is fixed on top.

Such foam rubber is glued to the inside of the armrest at a distance of 32 cm from the bottom edge.

After gluing, the back of the foam sheet is fixed over the existing material. The excess is cut off.

On the front side of the armrest there are protruding edges that need to be tucked in.

Finished parts are covered with fabric and nailed to them. accessories.

It remains only to assemble the sofa with your own hands completely.

Do-it-yourself corner sofa

Making a corner sofa with your own hands is not difficult, but you will need boards, plywood, wood boards, foam rubber, synthetic winterizer and upholstery fabric.

At the first stage, it is made seat, i.e. lower sofa. To fasten the boards, use self-tapping screws or corner plates. Boards are used with a width of 20 to 25 cm.

From below, the resulting box is closed oriented strand board.

On top of the seat, you can close the plate completely or fix it on hinges. You can combine options.

For the back, it is first made frame. The supporting part is sheathed with sheet material, and the back can simply be covered with a cloth. Specific dimensions depend on the parameters of the back and seat cushions.

For the seat, a sheet is cut that matches it in size. Glued to it foam rubber, spandbond and synthetic winterizer are laid. All of them are straightened and fastened from the inside with a stapler. The cover is pulled over the top. Such a seat can be mounted on hinges or left removable.

A corner piece is used to connect the two components of the sofa. It is made from any sheet materials in accordance with the width of the sofa. The back and lower front side are pasted over batting, on top of which is placed spandbond. The back side is upholstered with cotton fabric.

The legs are made from pieces of timber in which holes are made. They are attached to the lower frames, made from a corner plinth. The frames are applied to the frames and connected with long screws through the holes in the legs.

The side parts are attached to the corner part, connecting the lower parts of the walls. Next, for the corner sofa with your own hands, you need to make armrests.

To do this, make a frame of the desired size, wrap it with padding polyester, and then pull the cover. The finished armrest is fixed with self-tapping screws or clamping furniture knitting needles.

Unusual sofa: how to make?

It is not always possible to find original models in furniture stores, so it is better to make an unusual sofa with your own hands.

First from sheets plywood of sufficient thickness, cut out the details of the base and assemble it using a beam. It is better to make the back of the sofa from timber elements, and sheathe the surface with fiberboard sheets, the thickness of which is from three to five millimeters. In this case, the back will be strong enough.

The finished base is being processed wood stain or varnished. This makes it more durable.

For a soft base, foam rubber, synthetic winterizer and furniture fabric. From these, two pillows are made with a thickness of 16 to 25 cm. They are connected to each other with a stapler, and then attached to the frame using decorative adhesive tape.

How to make a sofa out of pallets?

To create a sofa from pallets with your own hands, you need to take pallets, sand their surface, coat with a primer and paint.

do-it-yourself sofa from pallets. A photo

Take two bars and cut them at an angle of twenty to forty degrees. The angle of the backrest depends on this angle. We fasten the bars to the pallet with corners.

Sheets plywood or MDF panels are also sanded, painted and primed. Then they are fixed as a back.

do-it-yourself pallet sofa A photo

It turns out the frame for the sofa. They lift him to his feet.

For soft seats and backs use foam rubber. Sheets are cut to size and applied to places.

From above, the structure is covered with fabric, which is fixed with a furniture stapler.

All knots are additionally strengthened. The result is a do-it-yourself sofa made from pallets.

Sofa for the living room: do it yourself

To make a sofa for the living room with your own hands, you first need to make drawing and calculate all sizes. Then, taking into account these data, the details of the future sofa are cut out of wood-based panels or thick plywood.

Assembled from parts frame fastening it with self-tapping screws. Make a retractable part by attaching necessary fittings and wheels. Guides are installed in the frame.

Cut out foam rubber and synthetic winterizer in size. Foam rubber is glued to the base, covered with padding polyester on top and covered with fabric. The fabric is fixed on the underside with a stapler. This mattress is used for the retractable part. For the rest of the structure, soft pillows and mattresses are also made. A detailed video will help to make a sofa for the living room with your own hands.

Sofa sofa: video of the manufacturing process

Making a sofa sofa with your own hands is quite simple. First created frame for the base. It is cut from boards of appropriate thickness. The material is ground, marked and assembled into a single structure. The back and sides of the sofa are glued together from three boards. Then the supports for the seat are placed and it is fixed there. Additionally, all parts are fastened with corners for greater structural strength.

Cushions for the seat and back are laid on the resulting base. It turns out a do-it-yourself sofa sofa.

Sofa corner for the kitchen

You can make your own hands and a kitchen sofa corner. This piece of furniture is quite compact and, at the same time, comfortable.

. sidewalls

According to the indicated dimensions, the side parts are cut out. They are mounted on support bars with a section of 4x4cm and a length of 45cm. Additionally, at the same height, another beam is attached to reinforce the structure.

. Box

This part is for storage. It is made from boards 2.5 cm thick and 15 cm wide. You will need two boards 120cm long and two - 30cm. The bottom is made from a sheet of plywood.

. Back

The sides are connected by horizontal bars. A back frame is attached to them, which is sheathed with a sheet of plywood.

. Seat

The frame of this part of the sofa consists of two longitudinal bars and four transverse ones. Longitudinal bars are fixed with self-tapping screws. Transverse ones are attached to them with a spike connection. A sheet of plywood is screwed to the frame with screws. The seat cover is connected to the rear longitudinal bar with a piano loop. The backrest racks are also attached here using metal corners.

Similarly, they assemble the short part of the kitchen corner sofa with their own hands. Prepare the corner joint, i.e. install racks and attach the seat. Then all parts are combined into a single structure.

. sofa upholstery

All parts are disassembled and foam rubber is cut out separately for each seat and back. It is fixed with glue, and soft parts are covered with fabric on top. Fabric details are cut out with an allowance. Attach the fabric with a stapler.

Small balcony sofa

To make a small sofa on the balcony you will need plywood or chipboard. The thickness of the material should be about two centimeters.

From sheet material and timber collect the frame of the product. Fasten it with screws.

The frame is pasted over with foam rubber and synthetic winterizer. Inside set folding mechanism.

The folding part will require mattress which is easier to do with my own hands. To do this, choose a foam rubber of suitable density and thickness.

The surface of the sofa is sheathed with fabric.

Seat cushions are made up of sheets foam rubber of different density and pasted over with synthetic winterizer on top.

The pillows and mattress are upholstered in fabric.

Kitchen furniture should be not only beautiful, but also comfortable. According to sociologists, it is in the kitchen that people spend the lion's share of their free time. In the kitchen they relax, cook, dine, receive guests. Comfortable and functional furniture will make spending time in this room comfortable and enjoyable.

One of the most common pieces of kitchen furniture is the kitchen sofa. Having appeared in kitchens in the second half of the last century, sofas have become quite popular. And this is no wonder. After all, it is much more convenient to sit on a soft seat leaning on a comfortable back than on a hard stool. How to make a comfortable and practical homemade sofa - further.

The choice of the design of the future sofa

Before you start working on making a sofa with your own hands, you need to clearly understand what needs to be done. The shape, color, functional tasks should be determined at the preparation stage. Of course, not everyone has the design ability to choose the right shape and color, but everyone can choose the model they like best and make the same one, since there are quite a few of them in various furniture magazines.

The color of the kitchen sofa should match the general color solution the entire room. The design and its dimensions are selected depending on the free space and location of the future product in the kitchen. It makes no sense to make a large and at first glance very comfortable sofa for the kitchen 6 m 2, if because of it the room is not too comfortable. When making furniture with your own hands, you need to choose less complex models. So you can save on material and production time. As a rule, a simple model is the most durable and durable. If there is no experience, you should not take on complex corner or folding structures, you need to start small.

Preparation of materials and tools

To assemble a simple sofa for the kitchen with your own hands, you need to purchase building material:

1. The beam is wooden. The cross section of the beam must be at least 50x50 mm. Only in this case can it withstand additional loads. For the manufacture of a sofa, solid wood is best suited. When choosing wood, you need to pay attention to its condition. The timber should not have knots, cracks, it should be normally dried. Special attention must be given to the knots. In the area where they are located, the tree has the lowest strength. Under increased load, such a beam can simply break.
2. Metal fastener. To assemble the frame of a wooden sofa for the kitchen, screws and confirmations are used. Confirmates differ from a screw in their thread and the shape of the head, which is designed for a hex key.
3. Plywood. Plywood is used for laying on the seat and back frame. Then it will serve as the basis for the soft upholstery of the sofa.
4. Foam for seat and back upholstery. Plain foam rubber is not very suitable for furniture upholstery. It quickly collapses, forming dips. And since the kitchen sofa is used quite often, with ordinary foam rubber it will quickly become unusable. For these purposes, foam rubber with a density of at least 32 kg / m 3 is used. It retains elasticity for a long time even with frequent use.
5. Upholstery fabric. As the latter, it is better to use dermatin. The kitchen is a place of potential contamination. Food stains, grease, drinks, etc. capable of transforming a new beautiful sofa completely unattractive. If most stains can be simply removed from the surface of the leather substitute with a damp cloth, then it will be more problematic to do this from other fabrics. It is possible to make a combination of different fabrics, however, this is troublesome and may not come out too beautifully.

To carry out these works, you will need the following tool:

• Electric jigsaw.
• Electroplaner.
• Drill.
• Screwdriver.
• Industrial stapler.
• Screwdrivers, wrenches and hex keys, tape measure, square, pencil.

The process of making a simple sofa for the kitchen with your own hands

After preparing a drawing of a kitchen corner or sofa, as well as all necessary materials, you can get to work.

Conventionally, the assembly of a sofa for the kitchen can be divided into four main stages:

1. Sofa frame assembly This is the most important step. Its strength and durability depend on how well it is made. The main parts of the frame will be three wooden frames. Two - for the formation of the seat, one - for the back. Frames are assembled from timber and fastened with self-tapping screws. To give them additional strength, stiffeners from the same beam are installed, and the corners are additionally reinforced with furniture steel corners. The size of the frames depends on the size of the sofa itself.
2. After finishing the assembly of frames, proceed to the formation of the seat. To do this, two frames are interconnected using pieces of timber up to 200 mm long. There should be at least 8 such racks for a seat length of 2 m. They are connected using self-tapping screws. When twisting the latter, you must be careful not to split the timber. To do this, make a rough run with a drill with a diameter less than the diameter of the self-tapping screw. Then a self-tapping screw is screwed into the hole. In this case, the beam will not crack. A sheet of plywood is laid on the seat surface. It is nailed to the base with nails. It is on the plywood that the foam rubber for the sofa upholstery will be laid.
3. After the seat frame is finished, the side racks are screwed to it. They will also serve as handrails. The rear racks are interconnected by a beam, which will act as a stop (support bar) for the back. The front and rear racks on each side of the sofa are interconnected, forming handrails.
4. The last step is to install the back. A sheet of plywood is stuffed on its frame, as well as on the seat, and the whole structure is put in place. With the help of fasteners and corners, the backrest is attached to the seat and the support bar.

After assembling the entire sofa frame, it needs to be finalized. The first step is to smooth out any sharp corners that can cause a tear in the fabric. It is also worth treating the tree with an antiseptic and varnish, so that under conditions high humidity kitchen it served longer. In addition, varnished or stained wood looks quite attractive.

DIY kitchen sofa upholstery

After the frame of the sofa is ready, it must be sheathed. This is done using high density foam rubber. Upholstery can be done in two ways:

1. Make removable covers for pillows, inside of which pieces of foam rubber are installed. In this case, the soft part of the sofa will be removable. You can remove the pillows at any time if necessary. This option will cost a little more, since you still have to upholster the sofa frame, so the consumption of upholstery fabric will be much greater. In this case, you will have to sew covers on your own or order in a studio, which will entail additional costs.
2. Make non-removable upholstery. To do this, the sofa is re-disassembled and upholstered each detail separately. The seat is upholstered first. To do this, foam rubber is laid on its surface. So that it does not slip, it is glued with glue "88". When the glue dries, you can start upholstery. To do this, cut out a piece of fabric or leatherette. It should be large enough to cover the top of the seat, the sides and have an overlap to secure the fabric on the back.

The fabric is laid out on a flat surface, in the middle of the segment (so that the size of the overlap on each side is the same), the seat is laid face down. Then one side is carefully folded and attached to the frame with a stapler. The step of the staples should be no more than 15-20 mm, in which case the fabric will hold tight. Since the “seam” will be on the wrong side, paper clips can not be saved. As soon as the first side is fixed, the second is stretched and also nailed with a stapler. Then the side sections of the fabric are bent. It is important to carefully form the corner of the fabric so that there are no visible wrinkles on it. Just as in the case of the main sides, one side is first nailed, then the other is stretched and nailed. The back is upholstered in the same way.

After upholstering all the elements, the sofa is assembled again.

As a substrate, you can use not only foam rubber. In many cases, foam rubber or holofiber is used. The latter has a fairly good elasticity, despite the relatively small thickness. In addition, its service life is longer than that of foam rubber. However, the cost of holofiber is much higher.

Making a kitchen corner sofa with your own hands

If the area of ​​\u200b\u200bthe room does not allow you to put a straight sofa, which is often found in homes old building where the kitchen barely exceeds 7 m 2, it is better to make a corner model. As mentioned above, such sofas are more difficult to manufacture and require experience in similar work. The corner design of upholstered furniture for the kitchen consists of three main parts:

• Short sofa.
• Long sofa.
• corner module.

The manufacture of short and long sofas does not fundamentally differ from the process described above. The corner module may be different. One of the options, which is the simplest, is the installation of a connecting table. It is made of laminated chipboard and is attached to the sofa rails. True, in this case, the corner sector cannot be used for sitting. To make the corner suitable for human landing, the manufacture of a separate corner section is required.

DIY kitchen sofa: video

Not everyone can boast of a spacious kitchen, where there is a place for large-sized furniture. AT small spaces each square meter is of great importance. This is especially true for the table area, where you want to organize as many seats as possible. For such a task, perhaps, the best solution is to use a soft corner sofa, which will make it possible to use the free space as efficiently as possible. Let's take a look at a few below simple options how to make a kitchen corner with your own hands. Drawings and diagrams combined with step by step photo instructions, will allow even an inexperienced master to understand the process and complete the work without the involvement of professionals.

If you want to minimize carpentry work, then you can use ready-made Ikea shelves of the appropriate dimensions as a frame. To make such a kitchen corner, you will need the following materials:

• Ikea shelves with facades;
• Chipboard or plywood;
• furniture foam;
• upholstery fabric;
• drill;
• electric jigsaw;
• construction stapler;
• bolts with nuts.

Coziness and comfort in a small kitchen

Installation and connection of the frame

When choosing the size of the shelves, certain standards must be taken into account: the height and depth of the seat of a soft corner in the kitchen should be on average 40-45 cm. The use of shelves is convenient because you can easily create not only an L-shaped structure, but also a U-shaped one, if for this has the area and layout of the room.

Structural elements are interconnected with bolts. To do this, you first need to drill holes of the appropriate diameter in the side walls. It is best to drill two shelves at once, fastening them together with clamps. However, this is not always possible due to the rather small internal space. If the drill does not fit inside the shelf, then the mounting hole is drilled from the outside - separately in each wall. In this case, it is very important to make correct measurements in order to maintain alignment when connecting structural parts.

Advice! If the bolts are tightened too much, the wood may be deformed. To avoid this, it is necessary to use additional gaskets under the bolt head and nut.

Making the frame of a kitchen corner with your own hands

Installation of facades and seat base

After installing the frame, you need to fix the facades of the shelves. Of course, you can do without them, which will significantly reduce the cost of construction. However, if you want to have extra storage space for kitchen utensils, then doors are a must.

The base for the seats is made of chipboard (OSB) sheets or plywood with a thickness of 10 mm or more. The use of particle board or oriented strand board is the most cheap option. Although when choosing a material, it should be borne in mind that plywood can be subjected to higher loads and has better moisture resistance.

The board is cut using a jigsaw according to the dimensions of the corner. After that, all ends must be sanded with medium grit sandpaper.

Fastening door-façades and installation wooden base for seat

Upholstery with soft material

Making soft seats for a corner in the kitchen is perhaps the most difficult stage of work. Furniture foam rubber 80 mm thick is cut in the same way as chipboard sheet(plywood), after which it is glued to the base.

Note! For reliable bonding of foam rubber with wooden surface special glue must be used. Furniture factories often use glue "88" or "Foam rubber-2", which are universal compositions for joining dissimilar materials.

The soft base must be covered with a cloth, for which a construction stapler is used - the distance between the staples is 1-2 cm. The complexity of this work depends on the chosen fabric. Even an inexperienced person can perform upholstery with a single-color material, but correctly pulling a fabric with a complex pattern is a task of a completely different level, requiring professional skills.

The finished product can be decorated with pillows, which will additionally serve as a soft back.

Kitchen corner from Ikea shelves

Simple kitchen sofa from a furniture board

Another affordable option is to make a corner for the kitchen with your own hands from furniture board. To complete this venture, you should purchase the following materials:

• furniture board (18 mm);
• acrylic paint;
• foam rubber (80 mm and 20 mm);
• the cloth;
• drill;
• jigsaw;
• wood screws.

Panel cutting and joining parts

Before you start cutting the shield, draw up a drawing of a kitchen corner with dimensions that will satisfy your criteria. The scheme must be developed in such a way that at least 3 people can comfortably sit on the sofa.

It is easiest to cut the shield with a jigsaw, although you can also use a hand saw. The main thing is that all ends are located at an angle of 90 ° with respect to the main plane, for which the tool should be held strictly perpendicular during the cut.

Details of the structure are interconnected by self-tapping screws. In order to prevent the formation of a crack during the tightening process, a hole must first be drilled under the screw.

Note! The diameter of the drill should be 0.5-1 mm less than the diameter of the self-tapping screw.

Hull painting

To paint the kitchen corner, you can use both alkyd enamel and acrylic. The second option is more preferable in terms of stability and durability of the layer. In addition, acrylic paint does not have a strong odor, so it can be applied directly indoors.

Before applying the first layer of enamel, the body must be treated with a primer to increase the adhesion of the paintwork to the wooden surface. Usually 2 coats of paint are enough to get an even color. Although dark tones may require 3 coats.

Making soft pillows

For the soft part, as in the previous version of making a kitchen corner with your own hands, furniture foam is the best option. Unlike materials such as synthetic winterizer or holofiber, which also give volume, foam rubber also has a good density, so it is more comfortable to sit on it.

Note! For the back, it is enough to use foam rubber with a thickness of 20 mm, while for the seat you will need a thicker layer - 80 mm.

If you know how to work on a sewing machine, you can sew removable covers with elastic or zippers for foam pillows. This approach is convenient in that the old fabric can always be replaced with a new one without much effort.

A simple option for a soft corner for a small kitchen

Nice piece of wood plank

A simple but pretty cute kitchen nook can be made from a wooden board. For this you will need:

• wooden board 100x40 mm;
• plywood or chipboard;
• round dowel with a diameter of 15 mm;
• drill with a crown 15 mm;
• jigsaw;
• construction stapler;
• batting;
• upholstery fabric;
• PVA glue;
• stain, varnish.

The scheme of the corner for the kitchen from wooden planks

Sawing and grinding parts

According to a pre-prepared drawing, which can be made using computer program or draw by hand on plain paper, the board is cut into separate segments. To give the kitchen nook more elegant look, with our own hands we cut curly elements.

Advice! To obtain smooth shapes, bends can be drawn using a long flexible ruler.

All parts are subjected to rough and fine grinding with sandpaper with different grain sizes. Where necessary, holes are drilled for dowels, which sit on PVA glue. Actually, the whole corner will be assembled with the help of dowels and glue.

The connection based on dowels and glue is considered one of the most reliable in furniture production

Staining and varnishing

As a coating, instead of enamel, we will use stain, which impregnates wood without creating a film characteristic of paint on the surface. Thus, the structure of the tree is completely preserved, while its color can be very different - from light "pine" tones to dark red.

Note! Stain has the ability to lift wood pile during the staining process. Therefore, after it dries, additional polishing of the surface will be required.

Lacquer, like stain, is applied in two layers. To speed up the process, it is recommended to use a water-soluble varnish, the drying time of which under normal temperature conditions is 30 minutes.

The base of the kitchen corner after staining and varnishing

Before lubricating the ends with glue, we assemble the kitchen corner “dry” with our own hands. It is important to fit all the holes and the length of the dowels so that the frame is assembled without gaps.

If all the ends and corners converge perfectly, then we assemble the frame already with glue. To reinforce the structure, you can use ordinary 4x4 metal corners that are mounted on inside corners.

The bottom of the drawers is made of plywood or chipboard, which is simply placed on any furniture corners fixed at the bottom of the frame.

The base for the seat is cut according to the dimensions indicated in the drawing from the same sheet of plywood or chipboard as the bottom of the drawers. Sheathing with soft material is performed in the following sequence:

1. We cut out a shape from foam rubber, which should be 2-3 cm larger than the base in length and width.

1. We cover the seat with batting, roughly cutting it along the contour and fixing it with the same glue.

Seat padding with batting

1. We attach the upholstery fabric to the base with staples.

The result is a very decent corner sofa that can decorate any kitchen.

DIY wooden corner in the kitchen

The original idea is a corner sofa made of pallets (pallet)

The design of wooden pallets used to transport various goods is quite simple. At the same time, the reliability of such elements allows them to be used not only for their intended purpose, but also for the production of original furniture.

Note! To make a pallet that can withstand a large load, manufacturers use premium lumber. Therefore, even used pallets are very reliable.

Of course, taking into account their dimensions, a corner sofa made of pallets will not fit in every kitchen. However, it is quite possible to use it in the gazebo, especially since the assembly of the corner is not particularly difficult.

Drawing of a wooden pallet with standard sizes

Selection and fitting of pallets

At the first stage of manufacturing a corner sofa, you should carefully examine each pallet and select only those designs that are free from defects. Particular attention should be paid to cracks and large chips, which can cause unpleasant consequences during the operation of the sofa.

Based on the dimensions of the pallet, a corner sofa is designed. If the area allows, you can assemble the structure from solid elements. Otherwise, you will have to use a circular or hand saw to fit required size.

Integrity check and preparation of pallets according to the required dimensions

Connection of parts

It is very simple to make a corner for a kitchen or a gazebo from pallets with your own hands. To do this, you need to assemble a kind of designer from the prepared parts and fasten them together with screws.

To equip the seat, you need to install pallets in two rows. Such a height will be sufficient, given that a layer of foam rubber (about 100 mm) or, for example, a thick mattress is supposed to be placed on top.

To make the back, you need to set the pallet vertically and screw it to the bottom of the base. Actually, this completes the assembly of the frame.

Production of soft elements

As noted above, the soft part of the corner (seat and back) can be made of foam rubber, covered with a beautiful fabric. Given the rather large area of ​​\u200b\u200bthe product, in this case you will have to spend a lot of money, since furniture foam rubber is not cheap.

Note! The price of one sheet of foam rubber measuring 2000x1000x100 mm starts from 1200 rubles.

If you use old mattresses and pillows as soft elements, you can save a lot. Of course, you still have to buy upholstery fabric, but the costs will still be significantly lower.

Original soft corner from pallets for a summer residence or a private house

The article offers the simplest and most affordable master classes for making a corner for a kitchen with your own hands. Perhaps there is not much design thought in these products and there are no modern technological solutions, however, it is quite possible to perform such work for a person who does not have solid experience in carpentry. For more serious tasks, there are specialists.

Video: how to make a kitchen corner with your own hands

A do-it-yourself kitchen sofa is an opportunity to independently make such a piece of furniture that will have the perfect balance of design, quality and price. When arranging a dining space in the kitchen, many are faced with the problem when store models do not fit into the dimensions of the kitchen. So, the sofa may look too bulky, or, conversely, unnecessary gaps remain during installation. In such cases independent production will allow you to perfectly fit upholstered furniture into the size of the kitchen, make the place as comfortable and cozy as possible.

What to consider when choosing materials

The choice of a kitchen corner should be approached responsibly, because this piece of furniture has been made for many years, and how comfortable and enjoyable breakfast, lunch, and evening tea drinking will be depends on its appearance and convenience. In addition, to make furniture yourself is to feel like a designer, to acquire a source of pride.

As for the upholstery, it is better to prefer synthetic materials, leather substitutes, because they are more practical: they retain their appearance much longer and are easy to clean. The material must have dirt-repellent properties, be moisture resistant, and withstand regular cleaning. The upholstery must be strong enough to withstand the weight of the people sitting on it.

• Microfiber. This fabric is durable, resistant to dirt, has a non-fading color. If a Teflon coating is present, then water drops are not absorbed, but roll down the surface.
• Velours. It is not recommended to choose velor as upholstery for kitchen upholstered furniture due to its impracticality. Although the cost of the material is low, but food particles, liquid easily eat into the structure, and frequent washing and cleaning makes it unusable.
• Flock. This material is a great choice for pet owners. Not only is there no hair left on it, but the marks from the claws are almost invisible. Flock is a durable, practical upholstery option that does not require serious maintenance.
• Artificial leather. Resistant to temperature changes, suitable for frequent washing detergents, does not burn out.

• Leather. The high cost of the material is offset by its durability, but leather care is not the most practical. It can not be rubbed, because the place of cleaning can change the shade, deform.

Before starting work, you need to prepare everything necessary tools, materials that will be required to make a sofa. For the frame, you can choose laminated chipboard, it has a number of advantages: affordable price, a wide range of shades, as well as resistance to high humidity.

For filling the backs and seats use foam rubber or polyurethane foam. In order to avoid deformations, the material must be sufficiently rigid.

The width of the seats should not exceed 40-45 cm, and the legs of the sofa should be under the vertical profile of the seat, otherwise there will be inconvenience when landing behind dinner table.

Materials and tools

To make a sofa for the kitchen with your own hands, you do not need serious professional skills and a large list of tools, it is enough to have detailed drawings and a little patience. Following the recommendations, you can easily make a beautiful, comfortable corner.

Would need:

• electric jigsaw;
• screws, dowels;
• metal corners, hinges;
• glue for fixing foam rubber;
• upholstery material;
• nichrome thread to make precise cuts in the foam;
• thrust bearings;
• edge for end processing;
• foam rubber;
• stapler, staples;
• roulette;

Be sure to remember that the material should be purchased with a margin. So, about 5% of the volume will go to waste.

It is important to choose a comfortable seat height. To do this, as a sample, you can take a chair or stool on which it is comfortable to sit.

When choosing a soft corner, you should decide on the direction of the corner, they can be right-handed, left-handed. If necessary, the parties can be swapped in the future. It should be taken into account that soft seats from foam rubber they are suitable for houses and apartments, and for verandas, summer kitchens it is better to make a corner with a hard seat.

It is necessary to first complete the drawings, noting all the dimensions, the dimensions of the future sofa. This will help determine the amount of materials needed.

As for colors, there are a huge number of options. So, if the family has small children or pets, light-colored fabric upholstery can quickly get dirty, and it will have to be cleaned often. Therefore, the beauty of the material must be combined with its practicality.

Good interior design is harmonious combination pieces of furniture and decor with the color of the walls, floor, ceiling. It is important that the parts of the interior look organic, have the same stylistic orientation.

We assemble a sofa

As an example, consider a corner with the following dimensions: height - 80 cm, length 100 cm, depth 40 cm. It consists of 3 parts: a long, short sofa, a connecting corner.

Long part of the bench:

• Seat - 96x30 cm.
• Back - 96x26 cm.
• The front part of the niche is 96x31 cm.
• Sidewalls - 80x40 cm.

1. Taking into account the main dimensions, width, height, depth, we make marks for milling. Then you should mark the holes for the screws and the points of docking with other parts. It is better to practice on scraps of chipboard in advance.
2. Using glue, we glue the edge to the sides, and fasten the thrust bearings to the lower ends using self-tapping screws.
3. With the help of 2 sheets for the sidewalls and 1 for the bottom, we construct a niche. The bottom is made of plywood.
4. To secure the lift seat with metal hinges, you will need a bar, its dimensions will be 96x100 cm.
5. The thrust bar has dimensions of 96x60 cm, when measuring, 2 cm should be subtracted. After all, it will be additionally fitted with filler, upholstery.
6. According to the measurements, the back is made, attached to the sidewalls with the help of dowels.
7. To the back is attached to the thrust and upper strips.
8. Next, fix the corners. wooden blocks will be cheaper, but it is better to give preference to metal ones - they securely fix the structure.
9. After the frame is assembled, you can begin to upholster and soften the seat and back. The foam rubber is put on glue, and the fabric is fixed with a stapler.

The short part of the bench is mounted in the same way as the long one. Its dimensions are:

• Height - 80 cm.
• Length - 60 cm.
• Depth -40 cm.

The connecting part combines the long and short parts of the bench:

• Length - 45 cm,
• Height - 80 cm.

In order for the corner to fit snugly against the wall, you need to cut sharp corners.

We attach the cut parts to each other with the help of dowels or self-tapping screws. Next, cut out the thrust bar, combine it with the seat. After the seat and back are made, you can attach the side parts. First you need to fix the details of the back, sidewalls with the help of dowels and corners.

When the main structure is assembled, you can fix the foam rubber and cover the sofa with fabric. Foam rubber of great thickness is cut with a hot nichrome thread, thanks to which high accuracy can be achieved.