Finishing the corners of the walls in the apartment: the right options. Decorative corners on the corners of the walls: application features Decorative finishing of the outer corner in the room
The most characteristic part of the house, in terms of architectural decoration, is the corner of the house. In this part of the building, you can see all, or almost all, elements of the facade stucco.
Roof overhang decor
The overhang of the roof is decorated with a large or small, complex or simple, single or composite subroofing cornice. A little lower there may be an additional dividing strip on the facade, which allows for color zoning of the facade of the house. The corner of the house itself is decorated with a variety of options in order to visually reduce or increase the height of the building. Rusts, pilasters, combined options are the main types of facade decor for the corner of the house. A separate and most basic part of the decoration of the exterior walls of the house is the facade decoration of the window.
window decor
The main task in the decoration of the window opening is also the alignment of the general proportions of the building due to the decor. More details and details about window slope design you can see on a separate page of our site. Also a very important part of the facade decor is the interfloor dividing strip. With the help of this decor element, the issue of separation is easily solved. various materials decoration of the walls of the facade of the house.
home wall decor
Also, with the help of interfloor molding, we visually reduce the not always proportional height of the house. And the final one in the set of facade decoration of the walls of a private house is. This element is primarily a logical separator between the basement part of the structure and the main wall. Also, the basement profile can perform technical functions - smoothing the difference between the protrusions of the wall and the basement, drip, etc.
Below are a few examples of facade decoration on the corner of the house. You can see more ready-made design options for the facade of the whole house HERE.
1. House Facade Decor Example
On the this example facade design country house the subroofing cornice consists of two separate elements forming a massive filling.
Making the corner of the house
The corners of the house are decorated with beveled rusticated stones. Rusts at the corner do not join with each other, but are mounted each on their own side.
Window decor, slope
The windows of the second floor are framed by a molding 12 cm wide along the wall. The top of the window is supplemented with a profile with an angle cut, as well as a keystone. On the windows of the first floor, in addition to the molding, a decorative window sill profile was used.
decorative division
In this case, a double interstorey division of the facade is applied. One strip goes along the line of the second floor window sills, and the other along the floor slab of the first and second floors. This technique helps to significantly underestimate the visual height of the building. Decorative frames from a thin facade profile are used between the dividing strips.
Basement decoration
Wall finishing materials
2. House Facade Decor Example
On this fragment of the architectural decoration of the facade of a private house, the under-roof space is also filled with a combination of two separate stucco elements. The height of the composition is greater than its departure along the roof, which gives a strong effect that underestimates the overall height of the house.
Facade stucco molding on windows
The second floor windows are framed by two separate moldings. Along the edge of the slope there is a flat profile, around it there is a symmetrical convex element. Brackets are cut into the outer molding of the window, which support the massive top of the window. The profile of the top of the window is made with a bevel, which allows not to cover it with additional metal. The windows on the first floor are complemented by a window sill profile and a curly top with an angle trim.
Making the corner of the house
The corners of the house are decorated with rustication of various sizes with chamfers on four sides. Rusts are located at a short distance from the corner.
Interfloor separation
In this example, one strip goes along the line of the window sills of the second floor, and the other along the floor slab of the first and second floors. This technique helps to significantly underestimate the visual height of the building.
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. Applied top coat walls after installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
3. House Facade Decor Example
In this set of facade decor of a private house, the roof overhang is also decorated with a combination of two separate stucco elements. The height and reach of the set are almost the same, which gives a complete and deep filling of this part of the facade of the house.
window framing
The windows of the second and first floors are decorated with a simple set of moldings and window sills with keystones.
Finishing the corners of the house with foam
The corners of the house are decorated with rustication of different sizes of a simple rectangular shape without a chamfer. This version of rustication is usually mounted from molded products.
Interfloor separation is made using two types of small profiles located at a distance from each other. The gap between them is painted in the color of the decor, thanks to which we get a wide separation on the facade.
plinth trim
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
4. House Facade Decor Example
In this set of facade decor of a private house, the roof overhang is also decorated with a combination of two separate stucco elements. The section of the elements has a greater number of bends and steps compared to the previous version.
Decorative window trim outside
The windows of the second and first floors are decorated with a large molding around the perimeter. The cross section of the molding has a pronounced, convex, rounded shape. The top of the window is mounted at a distance from the molding and is supported by decorative brackets.
Finishing the corners of the facade of the house
The corners of the house are decorated with pilasters of relatively small width along the facade. Each element is located a short distance from the corner of the house.
Dividing strip
In the interfloor division, two separate elements are used between which there is a strip of architectural ornament. The upper dividing strip runs along the bottom line of the second floor windows. The lower strip runs along the interfloor slab.
Finishing the foundation of the house
The compositional design of the basement part of the house can also include, in this case, the strip running along the bottom line of the first floor windows. This option looks good in the presence of the so-called French windows - when the bottom of the windows is not high from the floor. The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
5. House Facade Decor Example
This set of architectural stucco elements can be described as more complex in terms of geometry, complete set with decorative elements. Techniques were used to bypass additional thicknesses to create more relief and volume.
Window decoration outside the house
The windows of the second floor are framed with a wide relief molding 18 cm wide. From the window sill profile, additional reliefs imitating brackets are formed under the moldings by trimming at 45 degrees. The top of the window also has complex relief by cutting at an angle. The keystone is embedded in the profile part of the top of the window.
Exterior decoration of the corners of the house
Dividing strip
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The first floor is completed with rustication. This type of finish is performed by facades when insulating walls. Grooves are made in the insulation, which are then reinforced with the help of corners together with the main wall. The basement is decorated with marble or granite.
6. House Facade Decor Example
In this case, the main hallmark This composition is a massive, voluminous frame of windows. The subroofing cornice is made of two separate elements. mounted at a distance from each other. Gap between top. the main cornice and a smaller strip on the wall are painted in the color of the decor, which visually gives a single composition.
Window design outside
The windows of the first and second floors are trimmed with small molding around the perimeter. Moreover, a figured frame was created from it into which the brackets are inscribed. On the first floor, a straight top window from a large profile has been added. In addition to it, there is an arched element on the second floor.
Decor of the corners of the house with foam plastic
The corners of the house are decorated with simple rectangular rustication of the same size. Such a performance is usually carried out by the performers of facade work on site or from a molded product.
Dividing strip
A voluminous, protruding dividing strip was launched between the floors. Its dimensions and volume create an additional relief on the facade of the house.
Finishing the basement of the house
The plinth element is located with a thin part upwards to smooth out the difference in the thicknesses of the plinth and the main wall.
Wall finishing materials
The main wall decoration is bark beetle or decorative plaster. The finishing coating of the walls is applied after the installation of decorative stucco. This helps to additionally isolate the joint of gluing decor elements to the wall. The basement is decorated with marble or granite.
related posts:
Facade Design ~ 13+ Ready Solutions appearance…
Rational use of space plays a big role, especially when it comes to a small apartment. No one thinks about it, but in the corners there is unexpectedly a lot of space that can be decorated or arranged in such a way that it brings benefits. Tables, cabinets, corner furniture, shelves of unusual shapes will help you get the most out of even the most nondescript corner.
How to arrange a corner in the bedroom
In the corner there is a place for a large floor mirror. By the way, mirrors optically increase the space, and thanks to skillful lighting, this effect can become even more pronounced. Hang clothes hooks next to the mirror - the most necessary accessories will always be at hand.
How to arrange a corner in the living room: relaxation zone
Kitchen corner saves space in the kitchen
Corner furniture is classic version for optimal space small room. The kitchen corner will free up such the right place in a small kitchen or living room.
Corner in the apartment for a hanging chair
A boring empty corner can be turned into a stylish and family-favorite place to relax by hanging a chair there. Choose design, size and material hanging chair that will match your tastes and the design of the entire apartment. Put a couple of soft pillows and a blanket in the chair for extra comfort.
Reading nook can be organized very simply
A cozy reading nook does not require much: just soft floor cushions by a bright window - and you're done!
Corner shelves provide additional storage space
Corner shelves will probably become best solution to decorate the corner of the apartment. Even corner cabinets will be given a head start: without taking up much space, they look more airy, and at the same time they will cost you much less.
Shelves with an unusual design will be a great addition to a modern apartment
The market today offers a huge variety of corner shelves, although some models, of course, can be expensive and not suitable for you. But having shown a little ingenuity, you can independently make an interesting and convenient shelf.
Original do-it-yourself shelf for decorating the corner of an apartment
Anyone can build a shelf with their own hands. We need materials and tools that are in any home. Do not dare to cut a tree yourself? In hardware stores, this is done for a moderate fee. For example, this shelf is made from an old door.
Old stairs can decorate the corner of the apartment in an unusual way.
Original idea: an old unnecessary staircase can be a great decoration for a corner in an apartment. Ladders are multifunctional, can serve as both a shelf and a holder for kitchen towels. An old staircase will decorate the corner, so that it will no longer look empty and boring.
The corner is a great place for keys, notes and all sorts of little things.
You can make a small corner shelf with your own hands. Store on it all those little things that you often use: everything you need will be at hand.
The whole office fits in the corner of the apartment
Books, papers and workplace fit in one small corner of the apartment. Such a practical piece of furniture, as in the photo, will provide a lot of storage space. All things are in their places, and at the same time the room seems very spacious.
The empty space under the window can be filled with an elegant shelving
Don't like the idea of a reading nook? Place a small shelving under the window. It can not only store books and boxes, but also beautifully decorate.
An empty corner attracts the eye if it is beautifully decorated.
Use the corner of your bedroom to give the room an irresistible vibe. Hang a mirror on the wall, place a side table next to it, decorating it with candles, flowers and other decorative elements.
Corner sideboard for storing dishes
Extra storage space in the kitchen is always useful, and the space next to the window is often not used. Why not post it here corner cupboard? A piece of furniture will attract all eyes if painted in a bright color.
In the corner you can build a huge spacious wardrobe
For spacious bedrooms, this idea is also suitable: the corner can be turned into a whole dressing room. You can divide the space bookcase or sliding doors.
Corner fireplace for warmth and comfort on cold days
The fireplace creates a pleasant, cozy atmosphere in the room. Even if it seems that there is no place for a fireplace in the living room, see if you don’t have to give up this great idea, because you have a free corner?
How to arrange a corner in the nursery
An empty corner, a canopy and a few pillows, and the play corner is ready! And the child will decide for himself what toys to decorate his mini-room with.
An empty corner near the fireplace can be filled with firewood
The firewood rack in the photo fits perfectly into the empty corner near the fireplace. A very practical design with which firewood will always be at hand.
A cozy corner is a great place for your pet
Build a soft, comfortable bed for your pet. Being in the corner, the animals feel protected, which is why it is an ideal place for them. You can hang shelves for food, rewards or hooks for a leash and collar on the wall.
Such a wardrobe will allow you to use the space in the corner
Small hallway? Use the right corner furniture! This corner cabinet looks very neat and takes up almost no space.
Finishing the corners on the facade and inside the room should provide a long service life of the finish, safety, strength and aesthetics: evenness and beauty. All this can be realized with competent finishing of corners. It is difficult to finish the corners already because they do not just have to be close to the ideal of evenness in all planes. A finished corner is the section of the wall most frequently impacted, and the main condition for a correct corner is sufficient strength. Choose the type of decor for the corner, depending on the type of wall decoration, which can be plastered, wallpapered and paneled. Also, the corners are often trimmed with clapboard. The outer corners of the facade can be sheathed with siding of various types. Much also depends on the material of the wall: it is clear that fixing the corner trim on plastered concrete or brick wall it’s not at all like finishing the corner of a wall of aerated concrete or trimmed with drywall on a frame corner of an inner wall.
For plastered and sheathed plasterboard walls, special protective plaster elements are used, there are two types of these corners:
- Aluminum perforated for finishing on flat areas; durable and reliable parts, there are options for fasteners with reinforcing mesh;
- Arched plastic corners. Very flexible elements, designed for arches and semi-arches, suitable for surfaces with any curvature.
For the joints of PVC panels, you can buy special plastic corners in a variety of colors, but the sizes are standard.
Corners are glued to the main plaster or putty when applying a rough layer of plaster. When installing the corners, it is mandatory to control the verticality in two planes, use the building level or level. Corners for plastering corners are used not only for interior decoration. On the facade, such protection will not interfere even with light siding, since it not only aligns the corners, but also protects against mechanical damage.
For walls lined with light clapboard or plastic panels - this finish is popular for kitchens, hallways, bathrooms, loggias - corners can be finished in several ways. The easiest is to use a corner profile, a complete siding part. When installing and fastening the corner profiles to the crate, level control is required. The profile is fixed with a construction stapler on the frame, and the siding panel is inserted into a special groove. If there is no profile corner, you can decorate the wall plastic panel bent along the center line. If you make a neat longitudinal cut in the plastic, then the panel bends very carefully, and for plasticity on the front side, the panel is slightly warmed up with a building hair dryer.
Wooden lining is not necessarily adjusted and cut at the corners to the millimeter, and then the flaws are filled with putty to match. Special wooden corners perfectly decorate the corner - both internal and external. The junction of the lining is made quickly and without problems, the fasteners are made with glazing nails, the caps of which are bitten.
Decorative corner trim
To finish the corners of the house with the technology of insulation and plastering "wet facade", plaster corners with perforation and with a reinforcing mesh are used. If the facade is sheathed with siding, then there are usually no problems with the corners, since everything facade panels are completed with additional elements. But you can protect or repair the corners of a house lined with siding at any time. The corner also serves as a fastener for siding panels, protects the corner from accidental influences and performs a decorative function. Often the corners are decorated in a contrasting color. In addition to decor, the corner performs the following tasks:
- Fixing panels;
- Making panel joints;
- Protection of the ends of the panels from mechanical impact;
- Corner - a guide element when installing siding.
- Mount the outer corners of the siding along the crate, fasten it with self-tapping screws with vertical control.
By wooden walls decorative finishing is not necessary - a corner chopped from a bar or log is in itself a decoration of the house, in addition, strength is ensured when cutting corners. But another question is to protect not only the design, but also the material. For the corners of wooden log houses, where the end of the lumber is the least resistant to water, moisture, insects and microorganisms, protective measures are required - treatments with special sealants and impregnations for wood. Compositions for ends are used not only on the facade wooden houses but also indoors.
Finishing corners on lined or finished liquid wallpaper walls are traditionally done: All external corners of the apartment can be finished with decorative polyurethane, wooden or PVC corners. For classic interiors, polyurethane baguette corners are used, these linings look quite presentable, but more importantly, they provide protection to the corner. Pasting corners with decorative flexible stone is very popular - an easy way to make an exclusive finish with your own hands.
Finishing under the stone can be done with clinker tiles, and natural stone, and artificial - gypsum or cement, stylized as antique masonry. Stone materials and blades are used for facades, and in an apartment corners are more popular with flexible bricks or polyurethane corners. Installation of heavy corners requires wall preparation - you need to remove all layers of coatings to a solid foundation.
A large number of building materials on the modern market allows you to decorate the interior of a house or apartment in the most different options decor. This applies to walls, ceilings, doorways, window slopes, etc. But in order to give the lines a finished look and protect them from deformation, they use protective plastic corners that are easy to install, durable, practical and affordable.
- Reliable protection. No matter how carefully you treat the decorative finishes in your apartment, without the use of these plastic parts, scuffs, scratches, chips and other marks appear at the joints of the walls after a few months. Especially if there are pets in the room.
- Elimination of cracks and gaps. The plastic corner does an excellent job of solving the problem on any curved surfaces between wall panels.
- Improvement in appearance. A variety of options and colors allows you to transform the decor of the room and give it a finished and beautiful shape.
- L-shaped and T-shaped. They are used to seal joints, cracks, seams and create an even edge and an angle between plates or panels of different types.
- Standard (P-profile). Designed for decorating window slopes, arches, interior openings, etc.
- F-shaped. It is used as a material in the arrangement of slopes to close the joints of PVC panels and walls.
Show all
Plastic profiles to protect the outer corners of the walls
Perforated metal or plastic corners are used even at the stage of plastering and leveling walls and ceilings using drywall. Profile options set to strengthen the finishing layer of putty and give joints and lines in two planes an ideal geometric shape. With the help of these materials it is easy to align, at least visually, the external and internal corners even on the most uneven surfaces.
This finishing material outside corners walls has a number of advantages, among which experts distinguish such as:
But not only on the outside, plastic corners are used, they are also used to protect internal joints in order to hide the visible transition from different types finishes, such as drywall or MDF panels with wallpaper and wallboards.
Plastic corner - features of production and application
When sealing corner joints and irregularities on walls and ceilings, profiles made of silicone, polystyrene, polyurethane or PVC are used. The last PVC option remains the most popular and in demand due to its versatility and practicality. Such species are not used only as "flashing". When it is necessary to close the outer line of the window opening, metal counterparts or MDF panels are better suited for this.
Otherwise, the popularity of the PVC corner is due to good flexibility, durability, ease of installation and adhesion of the material with various types glue. Another plus is the affordable price, which is why the finishing corner is used if necessary to decorate large areas.
According to the shape, on which the specific area of \u200b\u200bapplication depends, the following options for plastic corners are distinguished:
Corners are produced in several sizes and in almost any color, like wood, natural stone, etc., depending on the specific conditions and finishing tasks. For installation on transitions between wallpapers and decorative plaster the smallest corner 10x10 mm is enough. For others internal works use materials with dimensions of 20x20 or 25x25, which are considered universal. Large views (50x50 mm) are used mainly for finishing external arches and the facade of the building.
Finishing slopes and bathroom
One of the areas of application of the PVC corner in repair and construction is the sealing of the slopes of doors and windows. This material is ideal for closing outside corners. The traditional technology for the manufacture of slopes involves the use of drywall and plaster with mandatory reinforcement with a special metal profile with perforation.
It allows you to create perfectly flat surfaces and geometrically align the planes, but after the final finishing, the open edge remains unprotected and here comes to the rescue plastic corner.
They close the ends of the facing panels and other external joints, as well as the intersection lines of the window sill and walls. Dimensions are selected based on the width and height of the window opening.
Such a corner is also indispensable when decorating a bathroom with a lined on the walls tiles. L-shaped profile close the seam between the bathroom and the wall. Due to its properties, PVC is ideal for a humid atmosphere and warns against the appearance of fungus at the joints and the passage of water.
Corners are also used to close gaps and joints at the entrance and interior doorways, especially when used in lining, PVC or MDF panels.
The use of "arched" corners in the decor of the room
The arched version of the doorway is becoming more and more popular, as it gives the room a solid look and frees up real and visual space. Internal arches are most often made of metal frame with drywall or wall foam blocks with a special layout.
In this case, joints and corner transitions from slopes to drywall are closed with a decorative plastic profile. To do this, the corner must be bent correctly so that it does not crack or break. Therefore, when improving arched corners, a special plastic profile or cut the usual into small segments of 25-30 cm.
For arches, a corner of an unequal variant with a size of 17x5 mm is ideal. It bends without distortions and fits well on the adhesive base, without peeling off the edge of the wall. With a small radius of the arc, "hot" bending of the profile is used. To do this, as it is being installed, it is heated with a building hair dryer to a temperature of 60-70 degrees and rolled against the wall with a soft paint roller.
The process of installing plastic corners is simple. The progress of work is no different from sticking a skirting board or polyurethane glazing beads. The main thing is to properly prepare the material and handle it as carefully as possible so as not to scratch or damage it.
When gluing slopes, first measure the length of the profile for each slope angle. Most often they have a rectangular shape, which means that all joints are made at right angles and the joint line is cut at 45 degrees. For arches or multifaceted vaults, the angle of the cut is determined locally.
After taking measurements, proceed to the correct cutting. To do this, use a sharp knife or well-sharpened scissors. If there are no such tools, then use an ordinary hacksaw for metal and a ruler for an even cut. All burrs and irregularities are treated with fine-grained sandpaper. Next, perform a preliminary measurement. The blanks are installed at the place of gluing and aligned with the building level and pre-fixed with masking tape in several places.
After that, it becomes clear how correctly the angular cut of the product was carried out at the junction of the two profiles. Sometimes it happens that a gap appears at the joint line (1-3 mm), especially for those who work with this material for the first time. To avoid this, allow an allowance of 2-3 millimeters to the initial measurements, and erase the excess with the same sandpaper.
Gluing process and selection of suitable material
Before proceeding to the final stage of the installation of the plastic corner, it is necessary to choose the right glue. Construction stores offer compounds called "liquid nails", they are also used by some craftsmen. But this tool cannot be called universal, it is only suitable for fixing thin and small profiles to a flat wall surface.
To close the slopes or gaps between the tiles and the bathroom, in complex arches and transitions from one material to another, it is better to use liquid silicone. It is classic, transparent or colored, mostly white. Silicone does not shrink, does not drain, unlike liquid nails and ordinary glue, which tend to chip and crumble over time.
This is especially true for places with high level vibrations in doorways, window slopes. In the bathroom, silicone will not only securely fix the corner, but will also serve as an additional gasket from water ingress and the formation of fungus due to constant humidity.
The sticker technology is simple. Silicone is applied to the inner surface of the profile along the entire length. If glue and the corresponding compositions are used, then they are squeezed out of the tube pointwise, at a distance of 10-15 cm from each other. You should not cover the entire corner with glue, it will be impossible to press it evenly, and the remaining glue will stain the surrounding finish, it will be problematic to remove them later.
The corner is installed in place of gluing and gently pressed, and then set as evenly as possible according to the building level and ruler. Additionally, they are fixed with several pieces of adhesive tape or electrical tape so that it does not change its position. Squeezed out adhesive residues are removed with a wet rag or paper towel; when working with silicone, the excess is removed after setting and drying with a clerical knife.
When joining a horizontal and vertical profile, a long bar is installed first, followed by the top one. It is also glued, but be sure to apply a small amount of adhesive to the corners of the joint and then allow the planks to fully grasp, usually it takes 15-20 minutes.
The plastic corner is used not only when decorating the interior, but also in the outdoor version, in cottages, bathhouses, wooden house from a bar with clapboard, on panel facades, etc. The material gives the structure completeness and additionally protects the tree from excessive moisture and other climatic influences. Affordable price, durability and a variety of shapes and colors make the plastic corner an indispensable and reliable interior detail.
In order to make the room seem as comfortable and habitable as possible, the owners often try to occupy literally every meter of the room, even the corners are no exception. Well, what to put in an empty corner or hang in general will be discussed in this review. But in fact, in fact, you can occupy it with a wide variety of objects, the main thing is to show imagination and choose an accessory that matches the general style of the room being designed.
1. Vase.
Floor vases in an empty corner will come in handy, and you can put both one large vase and several vases of different sizes. Review dedicated to floor vases can be studied.
2. Mirror.
The mirror in the corner of the room can be located in the bedroom or bathroom. Moreover, in the bathroom, you can place two identical mirrors close to each other on two walls forming an angle of 90 degrees, so you can get away from the generally accepted framework - using one mirror. In the bedroom you can pick up a huge oval-shaped mirror in a chic frame imitating stucco molding.
3. Stand for umbrellas.
Such a stand would be appropriate in the corridor or hallway, it looks unobtrusive, and performs its direct duties perfectly. AT modern interior it is better to choose a stand of strict forms, classic interior can be emphasized with a wooden stand with intricate carving elements.
4. Fireplace.
A chic solution that allows you to save space, thanks to the idea with a fireplace, you can kill two birds with one stone: take an empty corner and install a coveted fireplace. It is also impossible not to mention that the fireplace does not have to be real, you can purchase a magnificent imitation of it - an electronic portal.
5. Painting.
Favorite paintings can also be placed in the corner of the room, for this you only need to occupy two adjacent walls with panels, suitable examples are shown below in the photo. Two vertical rows of paintings of the same size, placed on the convergence of the walls, look very stylish.
6. Bookcase.
An excellent solution for a place with a closet for books, souvenirs or household appliances. Let this design look rather heavy, but it perfectly fulfills its original functions.
7. Armchair.
In the corner, you can organize a place to relax by installing a comfortable chair, and next to it is a compact table. This piece of furniture should blend in perfectly with the rest of the room.
8. Kitchen corner.
A soft kitchen corner will perfectly save space in the kitchen, as it obviously comes with a table and sofa benches. But before buying such furniture, it is necessary to measure the walls, perhaps a door or window will interfere with its installation.
9. Shelf or rack.
Such an element will remarkably occupy the corner space of the room. On the shelves you can arrange souvenirs, photo frames, toys and more. A chrome-plated rack will perfectly fit into a modern interior, a carved wooden rack will suit classic rooms.
10. Table.
Angular computer desk will save a lot of space, especially if it is made in a compact size. A white table looks weightless and visually elusive.
11. Table.
A small table set in the corner can serve as a stand for a landline telephone, a vase of flowers, flower pot etc.
12. Floor lamp.
Additional light will not be superfluous, and the floor lamp, in addition to its direct purpose, also does an excellent job of decorative functions, a wide variety of models, various shapes and colors are on sale.
13. Cabinet.
A corner cabinet with many drawers will allow you to store a lot of exploited things in your bowels: bed sheets, towels, bathrobes, etc. On sale, such corner cabinets are quite rare, so it is better to order them. individual production.
14. Photo frames.
Wall photo frames can simply be placed like a picture idea (as described above) in two rows on adjacent walls, or you can purchase corner photo frames that look not only unusual, but also incredibly stylish (examples below).
15. Flowers and indoor trees.
Quite often, the corners of the room are occupied by tubs with palm trees or shelves with pots of indoor flowers. Thus, the room will be filled with "green friends" that saturate the room with oxygen, and the corners will save the rest of the space that could be occupied by large tubs or flowerpots.
16. Stickers.
Decorative stickers pasted in the corner of the room are a really great decorative move, the space is absolutely not occupied, but the corner is incredibly transformed.
Corner fireplace:
Now you know what to put in an empty corner so that it pleases with its design. This is how an empty corner turns into a functional or just a decorative place, and you just have to choose the appropriate interior solution from the above ideas for your home.
The Dekorol portal reminds us that we have the opportunity to subscribe to receive news from this portal (the subscription form is located in the sidebar).