The photo without the corner is what it looks like. Schoolchild's corner: design, color selection and location in the interior of the children's room (93 photos). arched doorways

Critics, like other people, see what they are looking for, not what they have in front of them. NOTE A photo for a new type of passport is required to obtain a passport, which is issued for 10 YEARS and more. Medical certificate of the established form in accordance with Decree of the Government of the Russian Federation No. Questionnaire of a candidate for a job a sample of filling out a photo. Ready-made photo samples for documents. We make a photo for a driver's license in 5 minutes. R ID photo WITH A CORNER! PHOTO FOR DOCUMENTS IN 510 min. But in the middle of it, I noticed another one with me for ten minutes talking very pretty brightened up my stay. Which corner should the photos be, left or right? A photo for a medical certificate may be without the left corner. Document photo file with left corner sample. I used to think that on the left hand is what is given from

The only thing the instructor can ask for is photo 34 to. Download a photo for documents with the left corner sample from our file sharing. with the left corner, 3. Photo 3x4cm with the left corner on matte paper. Also, view the photo of the kitchen 9 sq. Category Guide. The value from the photo indicated for men and women requires the study of the attachment strips on both hands. The size of the photo is 3x4 cm, it is allowed to have a left corner in the picture. The first value sets the radius of the upper left corner, the second value is the upper right and lower left corner at the same time, and the third value is the lower right. Medical certificate of the established form 5. The car is still in production, there are options for both left-hand and right-hand drive

Photos of the established sample 4 pcs. For an old-style driver's license, the background is plain, light. Photo without corner sample. ID Photo Pro includes a ready-made database of photo formats for a variety of documents. Photos of the documents General requirements. With left corner or without corner. Posted 07 with a left sidebar so that there are two sidebar navigations Most likely it's the left sidebar or the right sidebar. Hold down the left mouse button and, starting from the upper left corner diagonally, drag the cursor to the lower right corner to. Large electronic educational library I think one topic will be better than three.

Huge selection finishing materials allows you to decorate walls, ceilings, doorways of an apartment or house in the most daring and interesting decor options, but there is one condition. You need to think in advance how to strengthen and protect the corner lines of the walls. Feature of modern wall decoration is such that the outer corners of the walls are the first to age and lose their appearance.

In some cases, protective plastic wall corners are simply indispensable, as in the case of tiling or wall panels. Therefore, people who are versed in matters overhaul When choosing a finish, be sure to look after the plastic corners to protect the corners of the walls.

Where and how profiles are used to protect wall corners

You have to get acquainted with the first version of the profile corner at the stage of plastering or leveling the surface of the walls using drywall. Installing a plastic corner under the wallpaper makes it possible to solve two problems at once:

• Strengthen the finishing layer of putty;
• To give the outer corner an ideal geometry, at least visually, the junction line of the two planes looks quite even.

Everyone who at least once had to glue wallpaper on walls with crooked corners will appreciate all the benefits and practicality of the simplest plastic profile.

Note! With the help of a wall plastic corner, you can easily remove external and internal corners even on the most uneven walls.

The main difference between corner profiles and decorative plastic corners is that the mounting option always has perforations along the entire length. The corner does not need to be glued, it is simply imprinted into a layer of putty or plaster mass. Even professional plasterers always use plastic corner.

But the use of mounting profiles to level the walls does not solve the problem. appearance corner edges, both internal and external, especially if the walls are finished with light trellises. Therefore, plastic corners are often installed in addition to the perforated profile.

What does it give:

• Complete corner protection. No matter how carefully the owners treat the decorative trim at the corner joints of the walls, after a few months, a maximum of a year, traces, scratches and chips of the lining will appear;
• Eliminate cracks and gaps between wall panels, especially at wall corners and skirting boards, on curved surfaces;
• A radical improvement in appearance. Colored plastic wall corners will help with minimal cost transform and significantly refresh the wall decor.

In this case, it is not necessary to be limited to the outer corners of the walls, although it is they, as they say, that are in sight and require protection in the first place. Often, a plastic corner on the corner of the wall has to be installed after the fact, it is worth rearranging the furniture once with the transfer of the most dimensional interior items. Scuffs and dirt can still be removed or washed, but chips and deep scratches on the walls have to be hidden.

Internal corners also have to be closed in order to mask the transition from one type of finish to another, for example, while lining the walls of the corridor with drywall, MDF or DFP panels, and living rooms with wallpaper and wall slabs.

Plastic profile for sealing corners

For decorative purposes, corners made of PVC, polystyrene, polyurethane and even silicone are used. If the walls of the room are finished with wood or tiles, then you will need a corner made of a similar material; a plastic profile for such a decor looks unnatural. For all other cases, the list of the most suitable materials invariably leads the PVC corner, it remains the most in demand. Almost everyone who faced the problem of finishing and protecting the corners of the walls with an overlay profile is unanimous in their choice, this is a PVC profile.

The exceptions are metal and MDF corners used as flashings, covering the line of the window opening from the side of the street. At the same time for balcony doors often use a plastic outer corner made of polyvinyl chloride.

The reason for the popularity of the PVC profile is determined by three important properties:

• Beautiful appearance, there are practically no problems with the selection of the desired shade of colored plastic corners to protect the corners of the walls;
• Plastic material is highly flexible and "democratic" during installation. No problems with gluing, as in the case of polystyrene or polypropylene corner profiles;
• Easy processing when adjusting the size of the corners. The material can be cut without problems with scissors, a "bread" knife or, best of all, with a sheet of metal.

Note! Good workability of the material does not exclude the possibility of profile cracking, especially if the plastic corner has been stored for a long time on a balcony or in a garage at low temperatures.

In this case, before cutting the plastic corner, it must be kept for an hour at room temperature.

Size of plastic corners

The advantages of the plastic corner include the low cost of the material. Depending on the height of the shelf, the price of a plank 2.7 m long ranges from 50 cents for a 10x10 mm size to $1.7 for a 50x50 mm profile. For cladding home walls and corners, a corner with a shelf of 20 mm and 15 mm is usually used, their cost is in the range of $ 0.7-1 for a standard bar of 2.7 m.

PVC profiles are represented on the market by three types of plastic corners:

• Standard equal-shelf version, in which both shelves are the same size;
• Double corner or T-profile used for decorating interpanel and tile joints;
• L-shaped or arched plastic corner with different shelf heights.

No matter how hard the masters try to align the planes of the walls, all the same, over time, a gap forms in the corner, which must somehow be masked by installing a plastic corner on the corner of the wall. Otherwise, an ugly line of transition from one type of finish to another will remain. For the case when you need to close the joint on the wall between the wallpaper and decorative plaster, the smallest profile, 10x10 mm, is quite enough. The same size of the shelves is selected for the outer corner for the plastic plinth. The largest profiles, 50x50 mm, are used for installation at the corners of building facades, sizes 20x20 and 25x25 are the most popular for interior work.

Options for using a corner profile for finishing corners

At first, most apartment owners are rather reserved about using angle profile when making corners and the line of the junction of walls. First of all, the well-established classical opinion interferes that the use of PVC materials in an apartment should be limited and used primarily where it is simply impossible to do without it. For example, for entrance doors in the bathroom or in the kitchen.

It is possible to destroy distrust of plastic corners only if people see with their own eyes the difference between wall decoration without a corner and after installing a plastic corner profile. The difference in perception even with the simplest decor is significant.

Finishing the slopes of doors and windows

Most good example advantages of installing a corner PVC profile the windows and doors of a modern apartment remain.

With the replacement of the old wooden window frame on a double-glazed window, as a rule, it is necessary to plaster slopes in a new way, to look for a way and material to close the resulting external corner to the walls of the room.

Traditionally window slopes are made on the basis of drywall sheets, with reinforcement outer corner perforated metal corner, photo.

This makes it possible to perfectly align the planes and achieve the most even angular line, but still the edge will remain a risk zone. The window is used quite often, so even curtains or curtains often cause damage to the edge. If finishing the slopes using MDF or PVC panels, then you simply cannot do without installing a plastic corner on the slopes. First of all, you will need to close the end of the cladding panel, otherwise the entire decorative effect of using the finish will be smeared. The dimensions of the plastic corner for slopes depend on the height and width of the window opening.

A plastic corner for drywall and wallpaper is selected 20x20 mm, for a corner at the transition of an MDF plate - wallpaper sets a corner profile measuring 25x25 mm. In the latter case, if desired, you can hide the installation of a protective profile, for this you just need to choose the right colored plastic corners for the slopes. Polyvinyl chloride is quite difficult to paint, so the repainting option is used if the entire window with slopes and corners is planned for painting.

In addition to finishing the outer edge, it is necessary to install plastic flashings between window frame and the plane of the slopes, as well as close the line of intersection of the window sill with the walls. For these purposes, it is best to use a T-shaped profile with a deflection in the central part.

At first glance, the line of intersection of the slope and the window sill may not be covered with a plastic corner, but this is not entirely true. Plastic window sill It springs quite strongly even under a small load, so after a few months the material with which the corner joint is sealed can simply spill out of the gap, so it is better to close it with a corner profile in advance.

The same plastic corners are often used for decorative sealing of the seam line between the bathroom and the tiled wall. PVC is ideal for damp bathroom environments.

The second section of the walls, where it is almost impossible to do without installing a decorative plastic corner, are entrance doors. If the entrance doors are changed in a house or apartment, this means that the owners will have a large scope of work on finishing and decorating the vestibule and door slopes. Since the front door always remains the dustiest place in the house, the slopes of the doorway, with rare exceptions, are traditionally finished with MDF, clapboard and PVC panels, most often under a tree or a natural stone.

After the walls of the door vestibule are plastered and puttied, the lining can be laid. Any master can confirm that after finishing works at the corner of the intersection of the walls of the corridor and the plane of the slopes, the ends of the facing panels will remain visible. They must be closed in order to achieve a finished appearance of the doorway and to exclude the accumulation of dirt and dust in the cracks.

If the lining of the vestibule was carried out by directly sticking PVC tiles or panels onto a plastered surface, then in order to close the gaps, a plastic corner with a shelf width of 30 mm will suffice. For decorative finishes, laid on a pre-stuffed crate or galvanized profile, you will need a corner plastic profile 40-50 mm in size.

arched doorways

Among the many design options for an interior opening, the arched scheme is considered one of the most beautiful and expressive. The arch is most often assembled on the basis of metal frame with lining with plasterboard sheets, or laying out of light wall foam blocks.

One of the problems that one has to face when assembling an arched arc is related to the inflexibility of drywall and galvanized profiles. Both of them are almost impossible to bend in a smooth curve. In order to get an arc, the supporting frame has to be recruited from a dozen short segments - chords. The filing of the inner surface of the arch is also recruited from short pieces of drywall.

You can simplify the task, for this, the decoration of the arch with a plastic corner is performed in the form of several rectilinear sectors, photo.

There are two ways to solve the problem of the most smooth profiling of the arch:

• Installing a finished arched plastic corner photo. It will only be necessary to adjust the dimensions of the opening to the finished profile, install and fix the polypropylene frame;
• Run the overlap of drywall wall sheets with a curved arc cut out according to the template. Inner part the slope is blown out with polyurethane foam, and the edge is sheathed with a decorative plastic arched corner.

The use of a decorative plastic profile allows you to close the joint and the corner transition from drywall to slope. This method of arranging an arched passage is cheaper and easier. But there is one condition, you need to know exactly how to bend the plastic profile under the arch. At first glance, bending a soft PVC profile is not difficult. One of the simple descriptions of how to bend a plastic corner onto an arch is shown in the video.

An ordinary plastic corner is not suitable for these purposes. Any attempt to stick or nail it to the edge of the drywall results in the decorative profile moving away from the wall at the top and breaking into two pieces. You have to cut one of the shelves of a regular corner into segments 25-30 mm long or, more conveniently, use a special plastic corner for the arch.

Most often, a 17x5 mm profile is used for an arched doorway. Due to the reduced side shelf of the plastic profile, the corner bends almost without distortion, which means that when laying the material on the adhesive, the risk of delamination from the edge of the wall will be minimal.

If the radius of the arc of the arched opening is small enough, the plastic profile has to be bent so much that even a special decorative corner begins to warp. In this case, you can use the "hot" method of bending. The corner is fixed at one end of the arch with a clamp or clamp. Next, the polyvinyl chloride profile is heated with a hairdryer to a temperature of 60-70 ° C and pressed against the edge of the drywall. While the material is cooling, it is rolled into place with a soft paint roller.

Advice! If it was not possible to bend the desired arc profile for two or three warm-ups, then the bending must be stopped, since the material becomes rigid and brittle after several heating cycles.

Before gluing the plastic corner on the arch, it is necessary to determine the contact points of the profile to the wall surface in order to apply glue in these places. If you do it "blindly", most of adhesive material applied to the plastic profile will be used up uselessly.

Do-it-yourself plastic corner installation

The process of laying a decorative profile on a corner or on the edge of an arch is not difficult, it requires accuracy and careful handling of plastic. PVC is easily scratched and loses its glossy sheen. Often, the front of the plastic corner is sealed with paper to avoid damage and contamination with glue. After the adhesive base has hardened, the surface of the corner can be polished with a soft cotton cloth.

One of the advantages of using a PVC profile is the fact that during production, the coloring of the material occurs throughout the mass, any scratches and abrasions do not lead to a change in color or shade. So you can polish the material an infinite number of times.

How to stick a profile on a corner joint

Working with a corner profile is no different from similar operations with a polyurethane glazing bead or plinth. Initially, before gluing the plastic corners to the slopes, you need to do a little preparatory work.

First, with a tape measure, we measure the length of the PVC profile for each slope angle. Since the window opening has a rectangular shape, all plastic corners will be joined together at a right angle. We will cut the junction line at an angle of 45 o. For other structures - arches or polygonal vaults, the angle of the cut will need to be determined at the place of the sticker.

After marking, you need to cut off the plastic strips according to the measurements taken. This should be done as carefully as possible, since the corner is quite thin, only 1-1.5 mm, so the material can be easily split if it is cut incorrectly.

Experienced craftsmen cut the profile with a construction knife under the ruler or well-sharpened scissors. If there is no relevant cutting experience, then it is better to use a carpentry tool for corner cuts. PVC is ideally cut with a conventional hacksaw blade.

After cutting, carefully remove the burrs and perform a final fitting of the cut blanks at the place of the sticker. To do this, you need adhesive tape and a building level. Having attached a blank of a plastic corner to the place of gluing, we align its position according to the level and fix it with several strips of adhesive tape. Install the upper corner bar in the same way.

Only by setting all the cut-out segments of the corner “roughly” and aligning them with the building level, it becomes clear how correctly the corner was washed down. Usually, for amateurs, a gap of 1-3 mm wide forms on the junction line. It is clear that it is impossible to glue a plastic corner with such slots.

Advice! When cutting a corner profile, add an allowance of 2-3 mm to the calculated size. This margin, when fitted, will help correct the situation without any special consequences.

To get rid of the cracks at the joints of the walls, you will need to once again clarify the passage of the gash line along all three blanks. To do this, draw a corrective line with a pencil and disassemble the design to adjust the corners. The cut line can be cut with scissors or sharpened with a piece of sandpaper wrapped around a wooden block.

How and what to glue

It remains to stick the plastic corner on the corner edge of the slope. First of all, you need to choose how to glue the plastic corner to the wall. In salons and hardware stores, the liquid nails adhesive composition will be recommended as the most suitable means. Of the positive characteristics, only convenient packaging in the form of a tube can be called.

Everything else - on the conscience of the manufacturer. With this composition, you can glue light polyurethane bovelacchi or a plastic corner measuring 10x10 mm to the tile joint. In addition, the white adhesive mass becomes beige-gray over time, so traces of glue are very clearly visible on the seams and joints.

Slopes on windows entrance doors it is necessary to glue with silicone, it can be transparent, but if desired, you can easily choose the color version of the sealant. Not all adhesive materials adhere well to the smooth surface of the PVC corner. Silicone sealant is a pleasant exception, it does not drip or shrink.

But the main advantage is in obtaining a strong and elastic seam. If you have to stick something on doorjamb, on light partitions that vibrate with each slamming of doors - choose silicone. Any other adhesives that give the strongest and toughest seams do not withstand vibrations and chip off, especially when it comes to a plastic corner.

The technology of sticking a corner plastic strip is quite simple. We apply glue with thin lines on the inner surface of each of the shelves. If the glue is very thick, then the adhesive mass can be applied to the wall with short oblique lines or dots. You can not cover the entire surface of the wall with a continuous layer. Firstly, it will be impossible to press such a plastic profile into place, and secondly, 50% of the adhesive mass will be squeezed out uselessly outside the corner. Too liquid glue will simply flow out from under the plastic strip.

Carefully place the prepared plastic corner with glue on the place of gluing. To make the adhesive seam strong, you need to gently press the bar into place. A small amount of adhesive mass can be squeezed out from under the plastic profile, but do not rush to remove it - first you need to level the corner. The PVC profile is very flexible, and it will not be possible to trim it with your hands, so the laid corner is brought into a straight line state using a metal ruler and a building level. So that until the glue dries completely, the plastic corner does not fall off the wall and does not slide down, you need to fix it with several strips of adhesive tape.

We glue the next plastic profile bar in the same way, but before laying it in place, it will be necessary to apply a small amount of glue to the joint line. After precipitation, part of the adhesive will come out at the joint, all excess can be removed only after the final drying of the adhesive mass. Until the glue has dried, any attempt to remove excess glue will result in stains on the wallpaper.

Sometimes there is a problem with the length of the arched corner. The maximum length of the plastic strip is 3 m. This may not be enough if the arched opening is made for the entire width of the room, the length of the corner profile on such an arch can reach 3.5-4 m. In this case, the arched arc has to be finished with a small piece. The best thing to do central part solid arcs, add two small segments on the sides, and close the joint line silicone sealant in the color of the plastic material.

After a couple of years, due to shrinkage processes, the seams may diverge a little, but still the arch will retain its original showiness. If you increase the length of the plastic corner on one side, then the junction will be perceived as a stain, and spoil the impression of the whole structure.

Conclusion

Plastic corners are successfully used not only for residential premises. For example, for a dacha or a bathhouse lined with clapboard, for a country house made of timber, protection of the corner joints of the outer walls always remains relevant. This is not so much a matter of aesthetic appearance of the building as an urgent need for protection from moisture penetration. In this case, two carriers are stuffed under a plastic corner 50x50 mm wooden slats, on which the plastic corner profile is glued.

Every child dreams of his own personal corner where he can spend time doing his homework or just doing his favorite things. Such a place can be a schoolchild's corner, which, if desired, can be equipped in almost any, even a small apartment. This requires only a competent approach to space planning.

The choice of furniture for arranging student space depends on the area of ​​​​the apartment, the number of rooms and children in the family.

Writing corner options

The main focus is usually on desk with hanging shelves or desktop cabinets for placing textbooks and notebooks. And you can show imagination and translate into reality the most interesting options furniture placement.

Modern designers have developed a number of modular designs that perform several functions at the same time.

Such models represent a schoolchild's corner with a bed, in which the study area is combined with a sleeping place, shelving for books, wardrobes for clothes and toys. In the niche of the bed there can be additional drawers for bed linen.

Furniture for a girl's children's room can be made in delicate pastel colors and have an interesting configuration: with elements of a princess's castle or other fairy-tale characters.

A furniture set for a boy, designed in marine shades, may resemble a pirate ship with porthole doors and other “marine” details.

Furniture in the nursery for a teenager-schoolboy looks more serious and stylish. As the child grows, the interior also undergoes changes. It could be concise design in high-tech or minimalist style.

A functional corner table is placed by the window, and the bed can be replaced classic sofa. If there are two children in the family, then a practical option would be bunk bed saving space.

If the child does not have a separate room, the student's corner with a closet is located in the common room. It may be small modular design with functional space.

To date, there are many companies involved in the manufacture of furniture to order. If it is not possible to choose a suitable option from those presented for sale, use the services of specialists. They make furniture individual design taking into account required dimensions and configuration.

If a schoolchild's corner is an expensive purchase for the family budget, take advantage of the installment payment that many furniture stores provide. After all, it is not always possible to accumulate the amount necessary for the purchase in a short time.

Decorating a student's corner

Regardless of what kind of interior you want to embody in the children's room, it should contain the main elements of the student's workplace, which help to comfortably and fruitfully complete school assignments:

A desk or computer with a wide work surface that allows you to sit comfortably when doing written work. The table for the child is selected in accordance with his height. It is best to buy a table together with the student, so that he sits down at the table, decides how much it suits him.

In addition, listening to the needs of the student when choosing furniture means making a purchase that he will be happy with, which will provide a desire to network for completing the lessons.

Computer chair providing shaping correct posture. The backrest of the chair should be adjustable in height, ensuring that the back is properly supported in the desired position.

Shelves or modules for placing books, notebooks, stationery and other educational supplies.

The child must be taught to order in the workplace. It is clear that order in things cannot exist if there are no places for their storage and convenient location. Auxiliary furniture should be easy to use, so it is better to arrange it so that the student can reach everything he needs without getting up from his chair.

All furniture should be of high quality and practical, because it is purchased not for one year. Drawers should be equipped with reliable fittings, slide smoothly and easily. After all, any shortcomings in the best way affect the concentration of the student when doing homework.

The design of the workplace can be done together with the child, let him mark everything as he wishes. In case of location bed in another room, a schoolchild's corner without a bed is set up.

If there is only one room in the living room, you can purchase a compact corner computer desk with add-ons in the form of various shelves and small boxes. Another option for a rational layout is the location of the study space under the loft bed.

In case of an acute shortage of free space, a folding table located against the wall will be a saving option. Above it, you just need to hang a couple of shelves for school supplies. Or you can use a place near the windowsill, which gives natural bright light, placing on it a wide tabletop, suitable for two children.

Favorable shades in the design of the training place

For children, an emotional atmosphere is very important, conducive to calm, concentrated work. The correct color design of the room will help organize it. Green color has calming properties, and yellow - activates mental activity.

Remember your school youth, where green was always the predominant color in the classroom. It gives positive energy and creates a working atmosphere. It is worth remembering that busting green causes excessive relaxation, so do not overdo it with the design.

Yellow is a great option, it has a tonic effect, which is necessary for a schoolboy who is at home. It is best to make yellow accents on furniture and school accessories.

Bright colors, a combination of blue with red or orange, on the contrary, excites and makes it difficult to concentrate. In this connection, it is better not to use them in the design working area. In general, the interior should be discreet, creating favorable conditions for the working atmosphere.

Equipping a schoolchild's corner, add home comfort, making the design not only practical, but also comfortable. Incorporate elements that remind you of something pleasant and joyful, such as mementos from various trips and framed family photos.

Location selection

A key aspect in choosing the location of the student's corner is the presence of natural light. The window opening should be located to the left of the desktop - for right-handers, or to the right - for left-handers.

The main thing is that the light falls on the written plane from the side. If there are several children in the family, and there is no possibility of creating a couple of corners, then it is best to put a table in front of the window so that everyone has enough lighting.

At the onset of darkness, along with ceiling lights it is necessary to organize additional lighting of the workplace. Desk lamp or a lamp with a bright but soft light can be mounted on the side of a table or placed on a wall.

It is good if the artificial light source is equipped with a swivel design that allows you to adjust its height and direction of light incidence.

It is desirable to separate workplace from the rest of the room so that the child is not distracted by foreign objects when doing homework.

Psychologists do not encourage the complete separation of the working area, as this creates a closed space, negatively affecting the child's psyche and suppressing working capacity. A rational option may be a screen that creates zoning space.

As it became clear, the creation of a student's corner - not an easy task requiring a special approach. All the same, the future of the student depends on its correct decision. In a rationally organized corner, the student will not only perfectly cope with the assimilation school material, but also be able to maintain their health and always be in a good mood.

Photo of a student's corner